Owner`s manual

ManualsBrandsCobra ManualsGadgetsCXT345C

Staying in touch with your family and friends is

convenient and easy when using your microTALK

radio. Some of the many uses you will discover include:

Communicating with others while hiking, biking, and working; keeping

track of family and friends at a crowded public event; checking with

travel companions in another car; talking with neighbors; arranging

meeting spots with others while shopping

at the mall.

Secure your microTALK

radio while on the go.

Carrying your microTALK

radio with you is easy

when using the belt clip or optional wrist strap.

The belt clip easily attaches to your belt, purse,

or backpack.

Introduction

Making Life Easier and Safer

Owner’s Manual

Belt Clip

TWO-WAY RADIO MODEL

CXT345C

Summary of content (10 pages)

PAGE 1
Introduction Owner’s Manual TWO-WAY RADIO MODEL CXT345C Making Life Easier and Safer Staying in touch with your family and friends is convenient and easy when using your microTALK® radio. Some of the many uses you will discover include: Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.
PAGE 2
Product Features Introduction Introduction Features 12 CHANNE L VOLUME • 22 Channels Seven shared with FRS/GMRS, seven FRS only, eight GMRS only.
PAGE 3
Introduction Operation Customer Assistance Warranty Caring for Your microTALK Radio • Your microTALK® radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Never put the radio in water or in a damp place. Avoid exposure to extreme temperatures. ® Installing Batteries To install or replace batteries: 1. Remove belt clip by releasing belt clip Remove Belt Clip latch and sliding clip up. • CHANN EL 2.
PAGE 4
Using Your Radio Operation Introduction Battery Low Quick Start 1. Press and hold the Mode/Power button to turn on your radio. 2. Press the Channel Up or Channel Down button to select a channel. Battery Low Customer Assistance Warranty • When battery power is low, the final bar in the Battery Low icon will blink and an audible tone will sound twice before the radio shuts off. Your batteries should be replaced or recharged, if using rechargeable batteries.
PAGE 5
NEL CHAN Using Your Radio Operation Introduction Customer Assistance LU VO Operation Warranty M E Listening for a Response • Release the Talk button to receive incoming Listening transmissions. Your microTALK® radio is always in Standby mode while the Talk or Call buttons are not pressed. • CHANNE VOLUME L To Adjust Volume Press the Volume Up or Volume Volume Button Down button. A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8).
PAGE 6
Using Your Radio • CHAN NE E VOLUM L L LL Privacy Code The privacy code 00 is not a privacy code, but allows all signals to be heard on a channel that is set to 00 on both the CTCSS and DCS systems. CHANN EL Channel Button VOLUME To successfully communicate using a privacy code, both the sending and receiving radios must be tuned to the same channel and to the same privacy code system (CTCSS or DCS) and privacy code number.
PAGE 7
Mode Functions LL MODE DCS Privacy Code 2. Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance. 3. When DCS privacy code is displayed, choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. b. Press the Lock button to enter the new setting and return to Standby mode. c. Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
PAGE 8
CA LL MODE VOLUME CHANN EL The Scan icon will continue to be displayed when Channel Button scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds. During scanning (while receiving an incoming transmission), you can choose from the following: a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode. b.
PAGE 9
Mode Functions VOLUME CA Roger Beep Confirmation Tone • Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak. To turn roger beep on or off: Mode/Power 1. Press the Mode/Power button until the Roger Beep icon flashes. The current on or off setting is displayed. 2. Press the Channel Up or Channel Down button Roger Beep Off to select roger beep on or off. 3. Choose one of the following: a.
PAGE 10
General Specifications and Licensing Operation General Specifications Introduction Operation Customer Assistance Warranty • FRS/GMRS Frequency Allocation and Compatibility Important: Please note that Cobra GMRS models with 15 Channels may designate different channel numbers for the same frequency. For example, a Cobra 15 Channel GMRS model would need to be tuned to Channel 11 in order to communicate with a 22 Channel GMRS tuned to Channel 15.