Operation Manual

16 / Instruction Manual
5. Problems and solutions
Malfunction Probable cause Troubleshooting
The unit does not
start or work.
There is no current.
Check the condition of the cord or
plug. If they are damaged, replace
them.
The switch is faulty or
defective.
Please contact your local dealer.
The carbon brushes
are worn and / or the
motor
has failed.
Please contact your local dealer.
The machine operates
intermittently.
The power cable is
damaged, switch is
faulty or defective.
Please contact your local dealer.
The cutting
performance is
decreased.
The blade teeth is blunt. Sharpen or replace the blades.
The blades get
heated excessively.
Dull blades.
Lack of lubrication
on the blades.
Sharpen the blades
Lubricate the blades with a little oil.
The motor rotates but
the blade does not
move.
The blade clutch is
defective.
The blade is blocked.
Please contact your local dealer.
Unplug the machine and remove the
object blocking the blade, or loosen
the screws on the cutter bar.
Strong vibrations of the
machine.
The blades and /
or transmission are
damaged.
Please contact your local dealer.
The machine is noisy.
Lack of grease in gear
box of transmission.
Please contact your local dealer.
Plants become yellow.
The blades are dull or
dirty.
Please contact your local dealer.