User Manual

Mounting And

Powering The Radio

Nothing Comes Close to a Cobra

English

Installation And Start-Up Installation And Start-Up

Mounting And

Powering The Radio

NOTE

All wiring is best kept as short as possible. If the power leads must be

extended, use a high-quality, marine-grade cable sized for up to 10 amps

of current. To minimize voltage drop, choose a wire gauge as follows:

Length Wire Gauge

Up to 1.5m (4.9ft) 1.6 mils (#14)

Up to 3.0m (9.8 ft) 2.0 mils (#12)

Up to 5.0m (16.4 ft) 2.6 mils (#10)

Up to 6.0m (19.7 ft) 3.3 mils (#8)

Electrical Power Connection

Your CobraMarine VHF radio is powered

by 13.8VDC vessel direct current in

negative ground systems. A fused (10A)

power connection lead is provided at the

back of the transceiver.

To Connect To A Power Source:

1. Attach the black (-) wire to a negative (-)

ground.

2. Attach the fused red power (+) wire to

the positive (+) side of the power system.

NOTE

This radio will draw up to 8 amps when transmitting at full power.

NOTICES

A reverse polarity connection will damage the radio.

When replacing the fuse in your transceiver, use only the size and type

originally provided.

Power Connection Cables

Red Cable

Positive (+)

Black Cable

Negative (-)

– +