User Manual

Set-Up Routines
Nothing Comes Close to a Cobra
®
29
28
English
Set-Up Routines
Set-Up Routines
Settings Menu
The Settings menu in the CobraMarine VHF radio allows you to turn On and Off many
of its features, to adjust other features to suit your preferences, and to enter your user
MMSI number.
To Enter The Settings Menu:
1. Press the Menu button.
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
through it to make as many entries as you like.
Whenever the setting selection highlight appears in a feature
portion of the menu, it will highlight the setting that was in
effect when you entered the menu.
When you are nished with changes, you can exit the
Settings menu by pressing the Exit soft key and return to
Standby mode.
To Exit The Settings Menu:
1. Scroll down to
EXIT at the bottom of the menu, or press
the Exit soft key to move up through the menu until the
radio returns to the Standby mode.
NOTE
Basic set-up routines are described here. For set-up
routines that apply specically to a particular function,
they are included in the section for that function.
LCD Backlight
The LCD has a Backlight lamp to make it visible in the dark.
This lamp can be adjusted for brightness or turned Off.
To Adjust The Backlight Level:
1. Enter the Settings menu and scroll to LAMP ADJ.
2. Press the ENTR soft key and observe the current backlight
setting —
HIGH, MEDIUM, LOW or OFF.
3. Scroll to switch to the setting you want.
4. Press the ENTR soft key to save the backlight setting. Or
press the EXIT soft key to
EXIT without making changes
to the backlight setting.
NOTE
If the backlight is set to off, ANY key press will activate the
backlight at the lowest setting.
LCD Contrast
The LCD backlight will not be visible in daylight, but the LCD
Contrast can be adjusted to make it easier to read in
different light conditions.
To Change The Contrast:
1. Enter the Settings menu and scroll to
CONTRAST
ADJUST
.
2. Press the ENTR soft key and observe the current contrast
setting — a number between one 0 and 16.
3. Scroll to change the number up or down
4. Press the ENTR soft key to save a contrast level. Or press
the EXIT soft key to
EXIT without making changes to the
Contrast setting.
Operating Your Radio Operating Your Radio
Menu Button
exit entr
menu
lamp adjust
contrast adjust
dsc setup
exit entr
High
lamp adjust
exit entr
16
level
contrast adjust
Menu Button
Menu Button