User Manual

Set-Up Routines
Nothing Comes Close to a Cobra
®
31
30
English
Set-Up Routines
Conrmation Tone
The Conrmation Tone sounds when your CobraMarine VHF radio is turned On
and to conrm all button presses except for the Talk button. If you would prefer
not to hear the Conrmation Tone, you can turn it Off and On as you choose.
To Turn The Conrmation Tone On Or Off:
1. Enter the Settings menu and scroll to
KEY TONE.
2. Press the ENTR soft key and observe the current
conrmation tone setting —
ON or OFF.
3. Scroll to switch to the setting you want.
4. Press the ENTR soft key to save the setting. Or press the
EXIT soft key to
EXIT without making changes to the Key
Tone setting.
U.S.A./International/Canada Channel Maps
Three sets of VHF Channel Maps have been established for marine use in the U.S.A.,
Canada, and the rest of the world (International). Most of the channels are the same
for all three (3) maps, but there are denite differences (see table on pages 66
through 78). Your radio has all three (3) maps built into it and will operate correctly in
whichever area you choose.
To Set Your Radio For The Area In Which You Will Be
Using It:
1.
Enter the Settings menu and scroll to CHANNEL MODE.
2. Press the ENTR soft key and observe the current channel
mode setting —
USA,INTERNATIONAL, or CANADA.
3. Scroll to switch to the setting you want.
4. Press the ENTR soft key to save the setting. Or press the
EXIT soft key to
EXIT without making changes to the
Channel Mode setting.
Time Adjust
Time Adjust will allow the radio to display the time as Local time or UTC time. For
time input to be converted to local time, you need to enter the hour offset of your local
time zone from Greenwich. (See world city time zone chart on page 82). You can also
choose to have the time displayed in a 12 or 24 hour format
To Change The Time Offset:
1. Enter the Settings menu and scroll to
TIME ADJUST.
2. Highlight the TIME OFFSET option in the menu.
3. Press the ENTR key and observe the current setting.
4. Scroll to change the setting for your local time zone.
5. Press the ENTR soft key to save the setting. Or press the
EXIT soft key to
EXIT without making changes to the
Local Time Zone setting.
To Select UTC or Local Time Display:
1. Enter the Settings menu and scroll to
TIME ADJUST.
2. Highlight the LOCAL TIME option in the menu.
3. Press the ENTR key and observe the current setting.
4. Scroll to change the setting for how the radio will display
the time (UTC or Local).
5. Press the ENTR soft key to save the setting. Or press the
EXIT soft key to
EXIT without making changes to the
Local Time setting.
Operating Your Radio Operating Your Radio
exit entr
key tone
off
on
exit entr
time adjust
local time
time offset
exit entr
time offset
00:00
set local offset
Menu Button
Menu Button
Menu Button