Owner's Manual
Table Of Contents
- Owners Manual
- Table of Contents
- Features
- Supplied Accessories
- Parts & Controls
- Safety
- Recommendations For Marine Communication
- VHF Marine Radio Procedures
- Voice Calling
- Digital Selective Calling
- Maritime Mobile Service Identity
- Radiotelephone Calls
- Emergency Messages And Distress Procedure
- Included In This Package
- Accessories Order Info
- Mounting And Powering The Radio
- Antenna Requirements And Attachment
- External Devices And Connections
- Getting Started
- Set-Up Routines
- Digital Select Calling (DSC) Setup
- Advanced Operation
- Maintenance
- Troubleshooting
- Specs
- VHF Marine Channel Assignments
- Weather Channel Assignments
- World City Time Zones
- Flush Mount Template
- Note on Incorrect Wire Colors Listed in Manual
- Warning Sticker
- Warranty
34
English
Set-Up Routines
Operating Your Radio
GPS Menu
All VHF Marine radios SHOULD / NEED to have a GPS receiver connected and operating
to effectively use the DSC (Digital Selective Calling) features built-in to the radios.
In an Emergency you want the rescue authorities and surrounding vessels to know
where you are and to be able to quickly assist you in your time of need.
This menu allows you to select the coordinate system which is basically the
accuracy (the most accurate setting is selected by default), and allows you to test
the GPS receiver, select the coordinate system which is basically the accuracy (the
most accurate setting is already selected by default), Select the Satellite Based
Augmentation System to be enabled or turned off (some areas on Earth need this
turned off for greater accuracy)(defaulted On), and allows you to test the GPS receiver
(will test either the internal or an external GPS receiver) to be sure that you are
receiving good satellite information and check the GPS signal strength.