Other Content

23
Nothing Comes Close to a Cobra
®
VHF Marine Radio Protocols Operating Your Radio
Bluetooth
®
Mode Pairing
and Programming
22
English
Bluetooth
®
Mode Pairing
and Programming
Bluetooth
®
wireless technology is a standard which has been developed for use in
mobile (cell) phones and other devices. This radio can be wirelessly linked to your
mobile phone if your mobile phone also has Bluetooth.This process of linking your
mobile phone and this radio requires a one-time “pairing” after which the two devices
can be “connected” when they are within range. When connected, this radio can act
as the speaker and microphone of your mobile phone while your phone is stowed in a
safe and dry location.
This programming section shows you how to complete the pairing process. It also shows
you how to change some settings related to the Bluetooth functionality of your radio.
Pairing Your Mobile Phone:
1. Press and release the Bluetooth button to enter
BLUETOOTH Standby. The matrix will display BLUETOOTH
STANDBY and the blue keypad backlight will come On.
2. Press and hold the Bluetooth button for four (4) seconds
[until the radio beeps four (4) times] from the Bluetooth
Standby mode. The blue backlight will light. Your radio is
now in a “Pairing Mode” and can be “found” by your phone.
While in pairing mode, the LCD will display PAIRING as
shown in the illustration below.
3. Follow the mobile phone’s instructions to search for
available pairing with another Bluetooth device. This can
often be found in the Tools or Settings menu of your mobile
phone.
Enter the “P.I.N.” (Personal Identification Number 0000), on
your mobile phone if prompted. Wait for the pairing
process to complete.
Bluetooth
®
Mode Pairing and Programming
VHF Marine Radio Protocols Operating Your Radio
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Bluetooth Standby Mode,
Unpaired State
EN
C
M
Bluetooth Button
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Bluetooth Pairing Mode
4. You will then see a confirmation of successful pairing
or a notice to try again if pairing did not occur. The
matrix will display BLUETOOTH CONNECTED once the
process is completed.
NOTE
This process only needs to be completed for first
time operation. From then on, as long as your mobile
phone is within 30 feet (10 meters) of the radio, the two
units will “Connect” automatically.
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Bluetooth Pairing
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
Bluetooth Mode Programming
•
The default settings for how your radio answers and conducts Bluetooth mobile phone
calls can be adjusted.
VOX On or Off
The
VOX function converts the radio microphone’s pickup of
your voice from being controlled by the PTT button to being
activated by your voice. When
VOX is On, the PTT button does
not need to be pressed to transmit your voice, and you can
just speak into the microphone.
When
VOX is Off, you need to press the PTT button while
speaking.
To Change Between VOX On and Off:
1. From the Bluetooth Standby mode, press and hold
Call/Enter/Setup button to access the Setup menu.
VOX On/Off will be the first menu item to appear. The
display will show BT VOX, the Vox icon and ON or OFF
flashing.
2. Press the Channel UP/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to confirm
your selection and move to the next Setup
mode programming.
MEMSAMEATIS VOX
LOMEDHI
VHF
T
R
A
B
GMRS
X
CIU
MEMSAME
VOX
Bluetooth Pairing and
Connection Complete
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 22