UI/Functional Specification VHF Marine Radio MRHH150FLT USA and EU Series 5-9-2018 LCD display requires update to support power level settings and add one more bar to RX/TX bar graph Date: May 8, 2018 Issue: Preliminary R2 Issued By: C.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 2
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 STARTUP DESCRIPTIONS • • • • • When the unit is first powered ON, a 500 Hz power up tone will sound for 100 ms unless KEY TONES are OFF. The LCD will display all Icons except ATIS for 2 seconds on USA models. The LCD will display all Icons including ATIS for 2 seconds on EU models. All buttons are inoperative during this 2 second period.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE STANDBY MODE Definitions: RX: unit is in receive mode and tuned to the displayed channel. Bar graph meter will display received signal level. Turn ON the following Icons: Rx, other depending on last used state. TX Mode: when PTT is pushed unit will transmit on current channel. Turn off RX, Turn on TX.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE STANDBY MODE – Continue KEY FUNCTIONS FOR MARINE STANDBY MODE: 1) Power Button Push and hold for two seconds to turn unit ON. Push and hold for two seconds to turn unit OFF. 2) Squelch Control Momentarily Press and hold Squelch key for < 5 seconds to open Squelch. Releasing the squelch key closes squelch. Press and hold Squelch key > 5 seconds to hold open Squelch.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE STANDBY MODE – Continue KEY FUNCTIONS FOR MARINE STANDBY MODE: 8) Dual Watch / Scan Key - DW operation Press and release DW / Scan; unit will activate Dual Watch mode. “DW” will appear on display as channels are scanned. Dual Watch setup: Select a desired DW channel. Press and release the DW/Scan button to start DW scan between selected channel and channel 16.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE STANDBY MODE – Continue 10) MEM / ESC Key MEM KEY: Press and release to enter Memory mode. MEM and memory channel icons turns on. First memory location is “0”, last is “9” Push and Hold MEM key for 2 seconds to enter memory channel program mode. Memory channel number blinks. Channel up/down keys change memory channel number. Push and hold to scroll.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE STANDBY MODE – Continue 11) Scan Key H / M /L and WX - push and release to change power level, no interruption of scan. Push and hold, exit SCAN and enter WX mode. When returning to VHF mode, display last active scanned channel or last used standby channel if no activity during SCAN mode.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 WX STANDBY MODE From WX standby: Unit is in receive mode and tuned to the last used WX channel The cloud Icon is turned ON WX channel number is displayed in the main channel digits (1st & 2nd digit locations) Bar graph display shows received signal level 1.5uV of received signal produces full scale on bar graph.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 Press and release DN key; channel # decrease. Press and hold DN key >0.5 seconds; channels decrease in rapid sequence every 250ms.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE SETUP MODE From Marine Standby: Push and hold Setup key for 3 seconds. (Enters Setup Mode) LCD is cleared of all Icons except those relevant to each setup step. UIC CHANNEL MAP SELECT Turn ON "U", "I", and "C". Flash current channel Map. Use channel UP or DOWN keys to change setting. Push Setup Key to save setting and move to the next setup item.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 MARINE SETUP MODE - (continued) From Marine Standby: Push and hold Setup key for 3 seconds. (Enters Setup Mode) LCD is cleared of all Icons except those relevant to each setup step. KEY TONE ON / OFF Keytone symbol "♫" and "ON" or "OFF" are flashing. ("ON" is the default setting) Use channel UP or DOWN keys to change setting. Note: This is a global setting (all radio modes).
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 WX SETUP MODE (USA model only) From WX Standby: Push and hold Setup key for 3 seconds. (Enters Setup Mode) LCD is cleared of all Icons except those relevant to each setup step. WX ALERT ON / OFF WX ALERT symbol and "ON" or "OFF" are flashing. ("OFF" is the default setting). If WX ALERT is set to "ON", turn ON WX ALERT Icon. Use Channel UP or DOWN keys to change setting.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 WX SETUP MODE From WX Standby: WX AUTO SCAN ON / OFF Default OFF alternate SCAN and OFF in LCD WX Icon is flashing. "SCAN" and "ON" or "OFF" are flashing alternately. ("OFF" is the default setting). When WX auto search is set to "ON", Scanning starts under the following conditions: 1) Unit is in Marine Standby mode. 2) Unit is in Power Saver mode.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 WX SETUP MODE – Continue WX setup mode notes: While in setup mode, if no action from user for 15 seconds then SAVE and EXIT to standby. When entering setup mode, the last saved value should be displayed. Default settings are restored and displayed after a factory reset. No signal reception in setup mode.
Cobra Electronics UI/Functional Specification Model: MR HH150 USA and EU Issue: Preliminary R2 Revision History Issue: Preliminary, 16 April, 2018; C. deWaal • New Issue Issue: Preliminary R2, 8 May, 2018; C. deWaal • Added industrial design. • Added volume control. • Included references to USA and EU models were needed. • Added comment regarding ATIS.
MRHH150FLT Important Product Information Safety Training Information This CobraMarine® radio has been tested and found to comply with the FCC RF exposure limits for use by the “General Population” and Industry Canada RF exposure limits for use by the “General Public.
International Station License If your vessel will be entering the sovereign waters of a country other than the U.S.A. or Canada, you should contact that country’s communications regulatory authority for licensing information. Radio Call Sign Currently, the FCC does not require recreational boaters to have a license. The United States Coast Guard recommends that the boat’s registration number and state of registry (e.g., IL 1234 AB) be used as a call sign and be clearly visible on the vessel.
n Assistance Customer Assistance Customer Assistance Customer Caution Assistance Customer Assistance Warranty UL2054 WARNINGS Warning Warranty Operation Customer Warning Assistance Operation Installation Customer Customer Assistance Assistance Caution Customer Assistance Caution Warning Installation Customer Assistance Notice Caution Notice Caution For Radios with Detachable Antennas WARNING The 12V power cord supplied with this radio is only to be used with its rechargeable batteries.
Declaration of Conformity EN (English) Hereby, Cobra Electronics Europe, Ltd. declares that the radio equipment type VHF Marine Radio is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.snooperneo.co.uk/DeviceDocs.cfm ES (Spanish) Por la presente, Cobra Electronics Europe, Ltd. declara que el tipo de equipo radioeléctrico VHF Marine Radio es conforme con la Directiva 2014/53/UE.
Specifications (Typical) General Number of Channels All U.S., Canadian, International and NOAA Weather Channels Channel Spacing 25 kHz Modulation 5 kHz Max. Input Voltage 6.0 VDC Battery Life: NiMH: 9.4 hours @ 3 watts 20 hours @ 0.5 watts 5% TX, 5% RX, 90% Standby 12 hours @ 1 watt Alkaline: 26 hours @ 3 watts 33 hours @ 1 watt Current Drain: Standby 45 mA Receive (Rx) 140 mA Transmit (Tx) 1.1 A @ High Power, 450 mA @ Low Power Operating Temperature Range -20˚C to 50˚C Radio Dimensions 4.
Limited 1-Year Warranty For Products Purchased In The U.S.A. Cobra Electronics Corporation warrants that its CobraMarine VHF radio, and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is used within the U.S.A.
