MODEL: MX46SPE COBRA LAWN MOWER OWNER’S MANUAL Cobra Garden Machinery Henton and Chattell Ltd., London Road, Nottingham NG2 3HW UK www.cobragarden.co.
CONTENT SECTION 1 SYMBOLS MARKED ON THE PRODUCT ……………..………….………. 3 SECTION 2 GENERAL SAFETY RULES……………… ……………..………….………. 4 SECTION 3 GENERAL IDENTIFICATION ........... ……………………………………… 6 SECTION 4 TECHNICAL DATA ............................ ………………………………………. 7 SECTION 5 ASSEMBLY ....................................... ………………………………………. 7 SECTION 6 ADJUSTMENT OF CUTTING HEIGHT …………………………………….. 9 SECTION 7 ADJUSTMENT FOR AN APPROPRIATE ANGLE………………………….. 9 SECTION 8 “3 IN 1”………………………………………………………………………...
KNOW YOUR LAWN MOWER Read this manual carefully, observing the recommended safety instructions before, during and after using your lawn trimmer. Following these simple instructions will also maintain your lawn trimmer in good working order. Familiarize yourself with the controls on your mower before attempting to operate it, but above all, be sure you know how to stop your mower in an emergency. Retain this user manual and all other literature with your mower for future reference. 1.
DOUBLE INSULATED Your mower is double insulated. This means that all external parts are electrically isolated from the power supply. This is achieved by placing an extra insulation barrier between the electrical and mechanical parts. 2. GENERAL SAFETY RULES The purpose of the safety rules is to attract your attention to possible dangers. The safety symbols and the explanations with them, require your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
IMPORTANT READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE. 1. Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. 2. Never allow children or people unfamiliar with these instructions to use the lawnmower. Local regulations can restrict the age of the operator 3. Never mow while people, especially children, or pets are nearby. 4. The operator or user is responsible for accidents or hazards occurring to other people or their property. 5.
29. 30. 31. 32. mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Be careful during adjustment of the machine to prevent entrapment of the fingers between moving blades and fixed parts of the machine. Always allow the machine to cool before storing. Replace worn or damaged parts for safety; Use only genuine replacement parts and accessories.
4. TECHNICAL DATA Model: MX46SPE Rated Voltage: 230V~ Rated Frequency: 50Hz Rated Power: 1800W No Load Speed: 2900/min Cutting Width: 460mm Grass catcher: 60 L Net weight: 31.2kg Degree of protection against liquid: Height adjustment : IP24 25-75mm, 7 adjustment Sound pressure level at the operator’s position 81.3dB(A) K=3 dB(A) Measured sound power level 93.5dB(A) Guaranteed Sound power level Vibration K= 1.83dB(A) 96dB(A) 1.096m/s² K=1.5 m/s² 5. ASSEMBLY 5.
Fig.2G Fig.2H 5.2 ASSEMBLING THE GRASS CATCHER 1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig. 3A/Fig. 3B/ Fig. 3C) 2. To remove: grasp and lift the rear cover, remove grass catcher. Fig.3A Fig.3B Fig.3C There is a level indicator on the top of the grass catcher that shows whether the catcher is empty or full: - The level indicator inflates if the catcher is not full during the moving. (Fig.
Fig.3D Fig.3E 6. ADJUSTMENT OF CUTTING HEIGHT Apply outward pressure to disengage the lever from the rack. Move the lever forward or back to adjust the height. The height (the blade to the ground) can be adjusted from 25mm (position 1) to 75mm (position 7), 7 height positions. All wheels will be in the same height of cut. Fig.4A Fig.4B WARNING: Make this adjustment only when the blade is stopped. WARNING: Disconnect the electric cord from the power supply. 7. ADJUSTMENT FOR AN APPROPRIATE ANGLE A).
8. “3 IN 1” The lawn mower has 3 in 1 features: 1. Rear grass collection. 2. Grass mulching. 3. Side-discharge. What is mulching? When mulching, the grass is cut in one working stage, then finely chopped and returned to the grass strip as natural fertilizer. Recommendations for mulch-mowing: - Cut your lawn regularly. Cut-back by a maximum of 2cm from grass of 6cm height. - Ensure the blade is sharp for best results - Do not mulch wet grass. - Only move at a walking pace.
Fig 6C 1. Lift the rear cover and remove the grass catch bag. 2. Mount the Mulching wedge. (Fig 6A/Fig.6B) 3. Lift sideward flap for side discharge (Fig 6C) 4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig 6C/Fig.6D) 5. Lower the sideward flap- the flap lies on the discharge channel. (Fig 6E) THREE: Mowing with the grass catch bag WARNING: only with a stopped motor and standstill cutter.
Fig.7A Fig.7B Fig.7C 10. STARTING 10.1 STARTING Before connecting up the lawn mower to the electric power supply, make sure that the mains supply voltage is 230V~50Hz. Before starting the lawn mower, fix the extension cord with the machine as the Fig.8A /Fig.8B shown. Fig.8A Fig.8B When the lawn trimmer power is on, the indicator light will turn on (Fig.8C). Start the motor as follows (Fig.8D): a) Press the safety push-button (1). b) And then, pull the the switch handle (2), to the main upper handle.
- 13 -
CAUTION! The equipment is suitable for use only in a power supply with permissible modulus of system impedance is 0.237Ω or less. 10.2 CONNECTION FOR AUTO DRIVE – SELF PROPELLED Grip the Self-drive control handle, the lawnmower will move forward automatically with about 3.6km/h, release the self-drive handle, the lawnmower will stop moving. Fig.9 CAUTION: your mower is designed to cut normal residential grass of a height no more than 250mm. Do not attempt to mow through unusually tall dry or wet grass (e.
screw (3) must be torque to 25NM. WARNING: For service, replace the blade with Cobra blade: Cobra Part no. 263001504 Fig.10 Warning: Disconnect the electric cord from the power supply. WARNING: Protect hands by using heavy gloves or a rag to grasp the cutting blades when replace the blade. 12. EXTENSION CORDS You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional area not less than 1.0mm² (not light than H05VV-F 2x1.0mm2).
14. TROUBLE SHOOTING Fault Remedial action Motor does not run check mains connection cable Start on short grass or on an area which has already been mown. Clean discharge channel/housing –the mowing blade must rotate freely. Disconnect the power supply first. Correct the cutting height. Motor power drops Raise the cutting height, in long grass. Clean discharge channel/housing. Check the cutting blade’s sharpness, replace as necessary.
15. WARRANTY This product is warranted in accordance with legal regulations for a 24 month period effective from the date of purchase by the first user. This product will not be covered if used in a commercial application.
17. EC-DECLARATION OF CONFORMITY EC Declaration of Conformity We herewith declare, Cobra Garden Machinery Henton & Chattell Ltd, London Road, Nottingham NG2 3HW United Kingdom that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.