MODEL: MX515SPBI (DYM1588SD) COBRA LAWN MOWER OWNER’S MANUAL WARNING! When using the machine the safety rules must be followed. For your own safety and bystanders please read these instructions before operating the machine. Please keep the instructions safe for later use. Cobra Garden Machinery Henton and Chattell Ltd., London Road, Nottingham NG2 3HW UK www.cobragarden.co.
: WARNING For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your mower before each use. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well.
CONTENTS SECTION 1 SYMBOLS MARKED ON THE PRODUCT……………………………4 SECTION 2 GENERAL SAFETY RULES…………………………………………… 4 SECTION 3 PARTS DESCRIPTION………………………………..…………….…. 7 SECTION 4 TECHNICAL DATA…………………………………………………...…. 7 SECTION 5 ASSEMBLY…………………………………………………………….… 8 SECTION 6 “3 IN 1”……………………………………………………………….…... 10 SECTION 7 OPERATION INSTRUCTIONS……………………………………..…. 11 SECTION 8 MAINTENANCE INSTRUCTIONS ……………………………..……. 14 SECTION 9 LUBRICATION INSTRUCTIONS …………………………………..
: WARNING For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your mower before each use. 1. SYMBOLS MARKED ON THE PRODUCT(on the rear cover) Fig. A B.1 Read Operator's Manual B.2 Keep Bystanders Away B.3 Pay more attention to the operator's hands and feet to avoid injury. B.4 Fuel is flammable, keep fire away. Do not add fuel with running machine. B.
●Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. ●The operators must receive proper training in the use, adjustment and operation of the machine, including prohibited operations. Preparation ●While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.
●Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted remove the key: - before clearing blockages or unclogging chute. - before checking, cleaning or working on the lawn mower. - after striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting and operating the lawn mower. - If the lawn mower starts to vibrate abnormally (check immediately).
3. PARTS DESCRIPTION 1. Upper handle 7. Height adjusting lever 13. Locking knob 2. Electric Start Button 8. Deck 14. Cable clamp 3. Battery pack 9.Sideward flap 15. Self-drive control handle 4. Rope Guide (Not fitted) 10. Spark Plug 16. Brake control handle 5. Locking Lever 11. Fuel cap 17. Mulching wedge 6. Grass catch bag 12. Oil Cap 18. Discharge channel 4. TECHNICAL DATA Model MX515SPBI Engine type Briggs 675IS Self-Propelled Engine Displacement yes 163cm³ Nominal Power 2.
MX515SPBI Guaranteed Sound pressure level 84.9dB (A) at the operator’s position [k=3 dB (A)] (According to EN ISO 5395-1 Annex F & EN ISO 5395-2, EN ISO 4871) Measured sound power level 94.1dB (A) k=2.04 dB (A) Guaranteed Sound Power level 98dB(A) (According to 2000/14/EC) Vibration 7.059m/s² (According to EN ISO 5395-1 k=1.5 m/s² Annex G & EN ISO 5395-2) 5. ASSEMBLY 5.1 FOLDING HANDLE Fig. 1A Fig. 1C Fig. 1B Fig. 1D 1. Use the knob to fix the lower handlebars into the unit body. (Fig.
Fig.2 5.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER 1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig. 3A) (Fig.3B) 2. To remove: grasp and lift rear cover, remove grass catcher. Fig. 3A 5.4 STARTER HANDLE Fig. 3B Move the starter handle from the engine to the rope guide, where fitted. Fig.4 5.5 HEIGHT OF CUT Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust height. (Fig.5 and see clause 7.9) Fig.
6. “3 in 1” Collection, Mulch and Side Discharge The MX515SPBI lawn mower offers the facility to collect grass, mulch or provide side grass side discharge: Grass mulching tips: The method of mulching grass clippings involves cutting the clipped grass more than once into smaller pieces of grass. The finely chopped grass makes an ideal fertilizer for the lawn. Hints for mulch-mowing: - Regularly cut-back by a maximum of 2cm from 6cm to 4cm grass length. - Ensure the blade is sharp for best results.
THREE: Mowing with the grass catcher bag 1. For mowing with the grass bag, remove the mulching wedge, the side discharge chute and mount the grass bag. 2. Removing the mulching wedge. -Lift the rear cover and remove the mulching wedge. -Removing the discharge chute: WARNING: Stop the engine and ensure the blade is stopped first! 3. Lift the sideward flap and remove discharge chute. -The sideward flap is spring loaded and will close automatically. -Regularly clean the sideward flap and discharge opening.
Start the engine carefully according to instructions and with feet well away from the blade. Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles. Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening. 7.3 OPERATION PROCEDURES During operation, tightly hold the brake handle with both hands.
underside of the deck preventing proper mowing of the grass clippings. Cut no more than 1/3 the length of the grass. The recommended cut for mowing is 1/3 the length of the grass. Ground speed will need to be adjusted so the clippings can be dispersed evenly into the lawn. For especially heavy cutting in thick grass it may be necessary to use one of the slowest speeds in order to get a clean well mowed cut.
8. MAINTENANCE INSTRUCTIONS SPARK PLUG Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use. BRAKE PADS Check and/or replace the engine brake pads in service agent regularly, only original parts can be used as replacement. 9. LUBRICATION INSTRUCIONS CAUTION: DISCONNECT SPARK PLUG BEFORE SERVICING. 1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil. 2. ENGINE-Follow engine manual for lubrication instructions. 10.
adapter with light oil. Install the blade adapter on the crankshaft with the "star" away from the engine. Refer to figure 14. Place the blade with the part number facing away from the adapter. Align the washer over the blade and insert the hex bolt. Tighten the hex bolt to the torque listed below: Fig.14 10.3 BLADE MOUNTING TORQUE Center bolt 40Nm-50Nm, to insure safe operation of your unit. ALL nuts and bolts must be checked periodically for correct tightness.
Fig.15A Fig.15B Start the engine carefully according to instructions and with feet well away from the blade. Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles. Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening. WARING: When cleaning, stop all other actions, for example mowing, mulching etc. 11.
12 TROUBLES SHOOTING PROBLEM Engine does not start. PROBABLE CAUSE Instart battery is not charged Fuel tank is empty. Air cleaner element is dirty. Spark plug loose. Spark plug wire loose disconnected from plug. Spark plug gap is incorrect. Spark plug is defective or Carburetor is flooded with fuel Engine difficult to start or loses power. Engine operates erratically. Faulty ignition module Dirt, water, or stale fuel tank. Vent hole in fuel tank cap is plugged. Air cleaner element is dirty.
13. WARRANTY This product is warranted in accordance with legal regulations for a 24 month period effective from the date of purchase by the first user. This product will not be covered if used in a commercial application.
15. EC-DECLARATION OF CONFORMITY EC Declaration of Conformity We herewith declare, Cobra Garden Machinery, Henton & Chattell Ltd, London Road, Nottingham NG2 3HW United Kingdom That the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.