MODEL: MX564SPB COBRA LAWN MOWER OWNER’S MANUAL Cobra Garden Machinery Henton and Chattell Ltd., London Road, Nottingham NG2 3HW UK www.cobragarden.co.
CONTENTS SECTION 1 SYMBOLS MARKED ON THE PRODUCT………………………………… 3 SECTION 2 GENERAL SAFETY RULES………………………………………………… 3 SECTION 3 PARTS DESCRIPTION…………………………………………………….... 6 SECTION 4 TECHNICAL DATA…………………………………………………………… 6 SECTION 5 ASSEMBLY………………………… ………………………………………… 7 SECTION 6 “3 IN 1”…………………………………………………………………………. 9 SECTION 7 OPERATION INSTRUCTIONS…………………………………………….... 11 SECTION 8 MAINTENANCE INSTRUCTIONS……………………………………..…… 14 SECTION 9 LUBRICATION INSTRUCTIONS…………………………………….……...
WARNING： For your own safety please read this manual before attempting to operate your new mower. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarise yourself with your mower before each use. 1. SYMBOLS MARKED ON THE PRODUCT Fig. A B.1 Read Operator's Manual. B.2 Keep bystanders away. B.3 Pay attention to the operator's hands and feet to avoid injury. B.4 Fuel is flammable, keep fire away. Do not add fuel with running machine. B.
Training 1. Before using the lawnmower read the instructions carefully. Familiarise yourself with the controls and pay particular attention in learning how to stop the machine in an emergency. 2. Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations can restrict the age of the operator. 3. Never mow while people, especially children or pets are nearby. 4.
18. Always ensure the engine is fully switched off before picking up/carrying the Lawnmower. 19. Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted remove the key, make sure engine has had time to cool. - Before unclogging chute and clearing blockages. - Before checking, cleaning or working on the lawn mower. - After striking a foreign object. Inspect the lawnmower for damage and make repairs before restarting.
3. PARTS DESCRIPTION Fig.1B 1. Upper handle 2. Brake control handle 3. Throttle choke lever 4. Starter handle 5. Rope Guide 6.Locking lever 7. Grass catcher 8.Lower handle 9. Height adjusting lever 10. Deck 11. Sideward flap 12. Spark plug 10. Oil cap 14.Fuel cap 15. Cable clamp 16. Height adjusting lever 17. Self-drive control handle 18. Side discharge channel 19. Mulching wedge Including A: Spark plug wrench 4.
MX564SPB Guaranteed Sound pressure level at operator’s position 84.8dB(A) (K=3 dB(A)) (According to EN ISO 3744, EN ISO 4871) Measured sound power level 93.2dB(A) K=2.09dB(A) Guaranteed Sound Power level 98 dB(A) (According to 2000/14/EC) Vibration 4.337m/s² (According to EN ISO 20643 K=1.5 m/s² 5. ASSEMBLY 5.1 FOLDING THE HANDLES 1. Fix the lower handlebars into the mower body with locking knobs, bolts and washers. (Fig.2A/2B/2C) 2.
Fig.2G Fig.2H 5.2 ADJUSTMENT FOR AN APPROPRIATE ANGLE A).Pull the locking lever opening. B).Rotating the upper handle centered of the angle adjusting gear for adjusted a appropriate angle into the scope -20º to 20º as the Fig.3 shown; C).Push the locking lever closed to connect the lower handle and the upper handle. Fig.3 5.3 MOUNTING AND DISMOUNTING THE GRASS CATCHER 1. To fit: Raise the rear cover and hitch the grass catcher on rear of mower. (Fig.4A/ 4B) 2.
5.5 HEIGHT OF CUT Apply outward pressure to disengage the lever from rack. Move the lever forward or back to adjust the height. (Fig.6 and see clause 7.9) Fig.6 5.6 Tool Box This lawn mower has a tool box, you can push the button to open it, and then press the cover to lock it. You can put tools such as a spanner, screwdriver in this box. (Fig.7) Fig.7 6. “3 IN 1” The lawn mower has 3 in 1 features: 1. Rear grass collection. 2. Grass mulching. 3. Side-discharge.
Fig.8A Fig.8B Fig.8C TWO: Resetting for side-discharge mowing Only when the engine and cutting blade are at standstill! 1. Lift the rear cover and remove the grass catcher. 2. Mount the mulching wedge. 3. Lift the sideward flap for the side discharge. (Fig.9A) 4. Mount the discharge guide for side discharge on the support pin of the sideward flap. (Fig.9B/ 9C) 5. Lower the sideward flap- the flap lies on the discharge channel. (Fig.9D) Fig.9A Fig.9B Fig.9 C Fig.
3. Mount the grass catcher: -To fit: Raise the rear cover and hitch the grass catcher on rear of mower. -To remove: Grasp and lift the rear cover, remove the grass catcher. 7. OPERATING INSTRUCTIONS 7.1 BEFORE STARTING Service the engine with petrol and oil as instructed in the separate engine manual packed in your mower. Read instructions carefully. WARNING! Petrol is highly flammable. Store fuel in containers specifically designed for this purpose.
7.3 OPERATION PROCEDURES During operation, tightly hold the brake handle with both hands. Note: During operation, when the brake handle is released, the engine will stop and thus stopping the lawnmower from operating. 7.4 TO STOP ENGINE CAUTION: The blade continues to rotate for a few seconds after the engine is shut off. 1. Release the brake control handle to stop the engine and blade. (Fig.11) 2.
the most effective job of mowing. Clean underside of deck: Be certain to clean the underside of the cutting deck after each use to avoid a build-up of grass, which would prevent proper mulching. Mowing leaves. The mowing of leaves can also be beneficial to your lawn. When mowing leaves make sure they are dry and are not laying too thick on the lawn. Do not wait for all the leaves to be off the trees before you mow. WARNING: if the mower blade strikes a foreign object, then stop the engine.
Fig.14A Fig.14B 8. MAINTENANCE INSTRUCTIONS SPARK PLUG Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use. 9. LUBRICATION INSTRUCIONS CAUTION: DISCONNECT SPARK PLUG BEFORE SERVICING. 1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil. 2. ENGINE-Follow the engine manual for lubrication instructions. 10. CLEANING CAUTION: Do not hose the engine. Water can damage the engine or contaminate the fuel system. 1.
10.2 CUTTING BLADE CAUTION: Be sure to disconnect and ground the spark plug wire before working on the cutting blade to prevent accidental engine starting. Protect hands by using heavy gloves or a rag to grasp the cutting blades. Tip mower as specified in the separate engine manual. Remove the hex bolt and washer which hold the blade and blade adapter to the engine crankshaft. Remove the blade and adapter from the crankshaft.
circulation, which is essential to engine performance and life. Be certain to remove all grass, dirt and combustible debris from muffler area. 11. STORAGE INSTRUCTIONS (OFF SEASON) The following steps should be taken to prepare lawn mower for storage. 1. Empty the tank after the last mow of the season. a) Empty the petrol tank with a suction pump. CAUTION! Do not drain the petrol in closed rooms, in close proximity of open fire, etc. Do not smoke! Petrol fumes can cause explosion or fire.
12. TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine does not Throttle choke not in the correct position Move throttle choke to the correct position start. for the prevailing conditions. Fuel tank is empty. Fill the tank with fuel: refer to the ENGINE MANUAL. Air filter element is dirty. Clean air filter element: refer to the ENGINE MANUAL Spark plug loose. Tighten spark plug to 25-30Nm. Spark plug wire loose or Install spark plug wire on spark plug. disconnected from plug.
13. WARRANTY This product is warranted in accordance with legal regulations for a 24 month period effective from the date of purchase by the first user. This product will not be covered if used in a commercial application.
15. EC-DECLARATION OF CONFORMITY EC Declaration of Conformity We herewith declare, Cobra Garden Machinery Henton & Chattell Ltd, London Road, Nottingham NG2 3HW United Kingdom that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.
