User Manual - PU880

To set VOX sensitivity:
1. Press the Mode button until the VOX icon ashes and
the current sensitivity level is displayed.
2. Press the Up or Down button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
proceed to other functions.
b. Press the Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to return to
Standby mode.
VibrAlert
®
and Call Alert
Your microTALK
®
radio can alert you to incoming signals by sounding an
audible call tone or an audible tone with VibrAlert
®
.
To change call settings:
1. Press the Mode button until the Call Setting icon is
shown on the display. The current setting (“0” ring
only“, 1” vibrate + ring) is displayed.
2. Press the Up or Down button to change the call setting.
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to
return to Standby mode.
Note: VibrAlert
®
will be suspended during charging
Roger Beep Conrmation Tone
Your listener will hear an audible tone when you release the Talk button. This
alerts the other party that you have nished talking and it is OK for them to
speak.
Key Tone
Key Tone is an audible tone which will sound each time a button is pressed.
11 12
Call Tone On/
Vibrate Off
Call Tone On/
Vibrate On
VOX Icon
Mode Button
Up/Down Button
VOX Sensitivity Level
Mode Button
Up/Down Button
The current VOX sensitivity level is
displayed with letters “L” and a Number 1
through 5, with Number 5 being the most
sensitive level and Number 1 being the least
sensitive level.
Voice Activated Transmit (VOX)
In VOX mode, your microTALK
®
radio can be used “hands-free,” automatically
transmitting when you speak. You can set the VOX sensitivity level to t the
volume of your voice and avoid transmissions triggered by background noise.
To turn VOX mode on or off:
1. Press the Mode button until the VOX icon shown on the
display. The current On or Off setting is displayed.
2. Press the Up or Down button to turn VOX On or Off.
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
proceed to other functions.
b. Press the Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to return to
Standby mode.