CONTENTS CONTENTS......................................................................................................................................................2 INTRODUCTION ..............................................................................................................................................3 SC 200 DASH CAM FEATURES.........................................................................................................................3 PRODUCT SERVICE AND SUPPORT ...........
INTRODUCTION Congratulations! You made the smart choice by purchasing an SC Series Dash Cam from Cobra. SC Series cameras provide peace of mind by continuously recording the road in beautiful HD video. With cutting edge features, phenomenal video quality, and an industry-leading focus on user experience, SC Dash Cams are the best solution to record your ride. This User Manual covers the SC 200 and SC 200D. SC 200 DASH CAM FEATURES Dual Lens With 1600P QHD single-view recording.
PRODUCT SERVICE AND SUPPORT For any questions about operating or installing this new Cobra product, PLEASE CONTACT COBRA FIRST…do not return this product to the retail store. The contact information for Cobra will vary depending on the country in which you purchased and utilize the product. For the latest contact information, please go to www.cobra.com/support.
HARDWARE INTERFACE 5|Page
INSTALLATION 1 MOUNT To install the Adhesive Windshield Mount, slide the dash cam onto the mount. Remove protective film from camera lens and display. Find the spot on your windshield where you would like to mount the camera and confirm the placement. Reminder, this is an adhesive mount, so it is important to mount correctly the first time. Next, peel the plastic film off the 3M adhesive and press the mount FIRMLY onto the windshield.
Note: A Hardwire Kit is available at www.cobra.com for a more permanent installation that allows for discrete routing of the power cable and recording while your vehicle is off. 3 DRIVE! Your dashcam is designed for easy operation. After powering the camera will instantly begin loop recording. When the MicroSD Card is full the oldest footage will be deleted to make way for the new. If you witness something that you do not want deleted simply press the Emergency Record button and it will be saved.
BASIC OPERATION POWERING ON THE DEVICE The device will power on automatically when plugged in and can also be powered by PRESSING AND HOLDING the On/Off button until the display activates (when connected to power). LOOP RECORDINGS: Once the SD card is full, the camera will continuously overwrite the oldest footage recorded with recent recordings. To protect a clip so that it will not be overwritten, press the Emergency Record/Favorites Button so that the clip is moved into the locked content partition.
INITIAL SETUP When first powered on, the device will show you the video stream and automatically begin loop recording. When the Dash Cam is first turned on, we strongly recommend to pair with the Drive Smarter App to download the latest firmware and ensure your camera contains the latest features. Please follow the directions below to pair the app with the camera. DRIVE SMARTER® APP CONNECTION Your Dash Cam uses a Bluetooth® connection to the Drive Smarter app.
iRADAR® APP CONNECTION Connecting to the iRadar App enables your camera to receive real-time driver alerts about what is on the road ahead including: CONNECTION INSTRUCTIONS For iPhone® 6s and later. • Power on your dash cam and be sure that Bluetooth is enabled • Make sure your iPhone’s Bluetooth is ON. The dash cam will NOT APPEAR in the iPhone’s Bluetooth Settings Menu. • Start the Cobra iRadar App. Press the Menu button in the upper left of the app and select Devices.
VIDEO SCREEN The Video Screen is the home screen for the device. With the SC200, based on settings, you can have one view or two views (picture-in-picture). VIDEO SCREEN BASICS: When first powered on, the display will show you what the camera sees. Note that the button functions are different depending on whether the unit is currently recording or not. When first turned on or connected to power, the dash camera is in Loop Recording mode.
STATUS BAR ICONS: A B C D E F G H I J A - Indicates when camera is loop recording Hazard icon appears in status bar if an Emergency Recording is in progress. The videos is being locked.
VIDEO SETTINGS Video Resolution: This setting allows you to set the following resolutions on your SC 200. Higher resolutions will give you a clearer image but take up more space on the memory card.
VOICE ANNOUNCEMENTS Your camera can warn you when you are approaching red-light and speed-cameras, user-reported police, radars detected in the area, accidents, and more from our community of users. When connected to the iRadar Mobile App, your camera can tell you what kind of threat you are approaching (For example: “Police Spotted Ahead” or “Accident Ahead”) to help keep you safe on the road.
MEMORY CARD STORAGE LOOP RECORDINGS: Once the SD card is full, the camera will continuously overwrite the oldest footage recorded with recent recordings. To protect a clip so that it will not be overwritten, press the Emergency Record/Favorites Button so that the clip is moved into the locked content partition. EMERGENCY RECORDINGS: An Emergency Recording is triggered when the Emergency Record/Favorites Button is pressed or when the G-Sensor registers a significant impact (hard braking or collision).
SAFETY FEATURES The SC Series Dash Cams come with several safety features designed to protect you and your vehicle. You can adjust the level of protection that fits you via Camera and Drive Smarter App settings. G-Sensor Impact Detection: Your Dash Cam includes a built in G-Sensor which allows the device to determine when the car has been in a collision. If it detects a collision, it automatically locks the recording being made at the time of the accident.
Lane Departure Warning The Lane Departure Warning System (LDWS) provides audible and visual warnings as you approach a lane boundary. It will indicate whether you are departing the lane to the left or to the right. Note that this feature relies solely on analyzing video of the road ahead and, therefore, works best on clearly marked roads with good visibility. This feature is for informational purposes only.
GENERAL SETTINGS Video Resolution: Allows you to select the desired video resolution for loop recordings and emergency videos. Lower resolution settings result in smaller file sizes, which results in more space on the SD card. Loop Clip Time: Loop recordings and emergency videos can be saved in 1 min, 2 min, or 3 min clips depending on your preference. Smaller (1 min) files are easier to transfer to your phone and share.
to monitor for activity. If leaving your vehicle off for more than 48 hours (or less if your battery is old) please use the “Auto Surveillance Shutoff” setting to set a time-limit on Motion Detection and prevent your battery from being drained. Note: For Motion Detection to work the camera needs to be connected via hardwire kit (part: CA-MICROUSB-001) or be plugged into an ‘always on’ Cigarette Lighter Socket.
Allows you to set a duration after which the device’s display turn off with the camera still recording. This setting is useful to avoid distracted driving and having a bright LED screen when driving at night. Interior Night Vision: The interior camera’s infrared LEDs allow for clear recording at night. You can set this to be always on, off, or select Auto to allow the camera to detect low-light conditions and automatically enable Interior Night Vision recording.
Volume: Allows you to raise and lower the volume of notifications and button beeps from your camera. WDR: Enabling Wide Dynamic Range allows your camera to accurately capture footage in very bright conditions. Enabling this feature is recommended for most recording conditions. GPS Format: Choose between Decimals and Degrees as the GPS format that is stamped in the watermark. Frequency: Choose between 50Hz and 60Hz as your operating frequency if you are experiencing flickering in your video.
FIRMWARE UPDATES Ensure the camera is connected to a constant power source during the update process. Failure to do so could result in your unit becoming non-functional.
• Plug the Micro USB cord into a reliable power source such as your home’s outlet or your vehicle’s CLA adapter. The Dash Cam will turn on and automatically boot into the Firmware Update Menu. • Follow the directions on the camera display to update firmware if the unit has one. Units without displays will update automatically. • You can check if your camera is up to date by checking the firmware in your camera’s ‘About’ setting submenu in the camera or via the app.
CAMERA SPECIFICATIONS 20 | P a g e
TROUBLESHOOTING If your unit does not appear to be operating properly, please follow these troubleshooting steps: • • • Make sure the power cord is properly connected. • Make sure you have downloaded the latest firmware to your unit Make sure the socket of your vehicle’s cigarette lighter is clean and free of corrosion. Make sure the power cord’s cigarette lighter adapter is firmly seated in your cigarette lighter FAQ • • Where do I mount/position my Dash Camera on the windshield? a.
TRADEMARKS ACKNOWLEDGEMENT, WARNINGS, and REGULATORY INFORMATION Cobra and the snake design are proprietary trademarks of Cobra Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by Cobra Electronics Corporation is under license.
SC 200 DASH CAM QUICK START GUIDE
THANK YOU! For purchasing the new ® COBRA SC 200 View, edit and share from your smartphone or desktop. Share & receive real-time driver alerts. Download today! drivesmarter.com/downloads Full manual available at: www.cobra.com FCC ID:BBOSC200, IC:906A-SC200. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
SC 200 Features Adhesive Mount Front View Camera Lens 3” LCD Display
Reset Button Micro USB Port USB Power Input Event/Emergency Recording Button Video Input Port for Flex Cam 8GB MicroSD Card Power Button (Press and Hold for Power) Adhesive Mount & GPS Attachment Vehicle Charger MicroSD Card Slot Micro USB Data Cable Quick Start Guide
1 Attach GPS mount and remove protective film from mount and front lens 2 Attach Camera Assembly to Windshield 3 Connect and Power To 12V Power Source
Button Functions (Recording Stopped): Enters the settings menu where you can adjust your camera’s settings Takes a snapshot and stores it in the Photo Folder. Enters the playback menu to review previous recordings and photos. Begins loop recording. Button Functions (While Recording): When pressed the camera saves the current clip from being overwritten. Takes a snapshot and stores it in the Photo Folder. Toggles the microphone on/off.
Voice Commands SC200 will respond to certain voice commands so you can stay focused on the road ahead. Try the following voice commands.
Attaching Additional Flex View Cameras For Cabin View* Connect Cabin Camera to the Video Input Port on the SC 200 For a View of the Road Behind You* Extension Cable to the Video Input Port 1 Connect on the Dash Cam 2 Connect Extension Cable to the Rear Camera 3 Attach Rear Camera to the Vehicle’s Back Window Warning: Please position the camera on the rear windshield so it faces out of the vehicle in the orientation shown *Additional Flex View Cameras sold separately
~,cobra® SC SERIES Dash Cameras lniportant Product lnforniation
Important Safety Information Safe Driving Motorists, as well as operators of emergency or service vehicles, are expected to exercise all due caution while using this product, and to obey all applicable traffic laws. Security of Your Vehicle Before leaving your vehicle, always remember to conceal this device in order to reduce the possibility of break-in and theft. Privacy This device may not be used to violate the privacy rights of others.
Product Service and Support For any questions about operating or installing this new Cobra product, PLEASE CONTACT COBRA FIRST.. .do not return this product to the retail store. The contact information for Cobra will vary depending on the country in which you purchased and utilize the product. For the latest contact information, please go to www.cobra.com/support For products purchased in the U.S.A. you may call 1-800-262-7212 (1-800-COBRA-12).
Regulatory Information NOTE: This device complies with part 15 of FCC rules: Operation is subject to the followi ng two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'lndustrie Canada applicables aux appareils radio exempts de licence.
The procedure for obtaining service and support, and the applicability of this warranty, will vary depending on the country or jurisdiction in which you purchased and utilize the product. For the details on obtaining product service, support and warranty please visit www.cobra.com/support Provided that the product is utilized within the U.S.A.
SC 200 Smart Dash Cam Flexible dash cam protection Adhesive Mount & GPS Attachment Product Features Power Reset Micro Button Button USB Port Event/Emergency Recording Button 3" Screen Quad HD Video Quality with LCD Display Integrated Voice Commands Hands-Free Camera Operation Enhanced Night Vision Crystal Clear Footage Video Input Port for Flex Cam Drive Smarter App Manage Your Dash Cam Settings, Videos and Alerts from Your Phone Dual Band Wi-Fi Flawless Connectivity Real-Time Driver Alerts Speed &
SC 200 Smart Dash Cam SPECIFICATIONS: Unit Dimensions 3.41” H x 1.29” W x 2.03” D (86.5mm H x 32.7mm W x 51.5mm D) Individual Box Dimensions Individual Box Weight 7.50" H x 5.13" W x 2.68" D (187mm H x 125mm W x 66mm D) .94 lbs (428 g.) Model SC200 Master Pack Qty. 4 Master Pack Dimensions 11.42” H x 8.11” W x 5.79” D (290mm H x 206mm W x 147mm D) Master Pack Weight 4.11 lbs. (1862 g.
C We rrust you will enjoy your Cobra product. Ir you have questions about your product or its many features, our Customer Care Experts are here toassist you. NEED HELP? WAIT! PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact Cobra directly for serviceand support. ByEmail: info@cobra.com By phone: 800-964-3138 Online: www.cobra.
Activate your product warran www.cobra.com/register Activate ~ol!.