Introduction Contents Introduction .............................................................................................. 2 Important Information and Customer Assistance ....................................... 3 Components ............................................................................................. 4 Features ................................................................................................... 5 Registration and Downloading ...........................................
Introduction Introduction Thank you for purchasing the Cobra SL3 GPS Safety Locator. This user manual aims to provide you with installation and user instructions for the SL3 GPS Safety Locator.
Introduction Important Information and Customer Assistance Important Information Safe Driving Motorists, as well as operators of emergency or service vehicles, are expected to exercise all due caution while using this product, and to obey all applicable traffic laws. Security of Your Vehicle Before leaving your vehicle, always remember to conceal your GPS Safety Locator in order to reduce the possibility of break-in and theft.
Introduction Components Components The following components come as standard with your Cobra SL3 GPS Safety Locator: 1 x SL3 system 1 x Windshield bracket with suction cups 1 pair x Hook & Loop fastener 1 x Coiled 12V power cord with cigarette lighter socket adaptor 1 x USB - PC connecting cable Nothing Comes Close to a Cobra® 4
Features Introduction 1 2 3 3 4 4 5a, 5b 7 12V DC 9 8 6 1. 2. 3. 4. 5a. 5b. 5 Mute/Dim Button Memory/Delete Button Zone 1 Alert* (Green LED) Zone 2 Alert* (Amber LED) Zone 3 Alert* (Red LED) GPS Status Indicator 6. 7. 8. 9. Bracket Mounting Slot 12V Power Input Socket USB Socket Power On/Off/Volume Control * Refer to “Alerts” section of the manual for Zone. -Flashing Red: establishing satellite connection when singly lit. -Green: satellite connection established.
Introduction Registration and Downloading Registration IMPORTANT PLEASE READ BEFORE USING YOUR COBRA SL3! Registering your Cobra SL3: The database built into your Cobra SL3 is populated with the latest data available during production. However, you will need to register your SL3 to receive your one (1) year free database “update” subscription to the AURA™ Camera and Driving Hazard Database.
Mounting Installation Installation Once you have performed a download it is time to install the Cobra SL3 into your vehicle. The most important aspect of this installation is ensuring that the SL3 is positioned in such a way that it has a clear view of the sky while ensuring that the device is situated so that it does not interfere with the vehicle controls, jeopardize passenger or driver safety.
Mounting Installation Installing your Cobra SL3 using the Hook and Loop fastener The Cobra SL3 can be installed anywhere on the dashboard as long as the built-in GPS antenna has a clear view of the sky, you can easily see the LED display, and you can operate the controls safely. You will also need to be sure that you can connect the power connection cable. Your SL3 can be installed easily with the Hook and Loop fastener if you have a sufficiently flat area on your dashboard.
Mounting Installation Installing your Cobra SL3 using the Windshield Suction Cup bracket If you prefer, you can mount your SL3 to the inside of your vehicle’s windshield using the suction cup bracket provided. Simply select a position within the windshield so that the top of the unit has a clear view of the sky, remembering that you need to connect the power connection cable, as well as ensuring that you can read the LED display and reach the controls safely.
Power Connection Installation Power Connection Using the cigarette lighter socket The Cobra SL3 comes with a power cable designed to plug into your vehicles cigarette lighter socket. Take the power cord and plug the smaller end into the DC 12V input socket on the back of the SL3 and the cigarette lighter adapter in your vehicles cigarette lighter socket. 12V DC Please Note: Do not leave your SL3 plugged into the cigarette lighter socket when you start your vehicle.
Power Connection Installation Caution: If you must use pliers to loosen the ring, be careful not to crush the tip. Never use pliers or other tools to retighten the ring on the cigarette lighter plug. 2. Pull the ring straight out, then remove the metal tip, spring and old fuse. 3. Check the fuse to see if it has blown. If it has, replace it. 4. Replace the metal tip and spring inside the ring, then place the fuse inside the cigarette lighter plug and screw the ring back onto the plug.
Operation Operating Instructions Starting Up After you have successfully installed your Cobra SL3 it is time to perform the first start up. First, make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings so that the built-in GPS antenna has a clear view of the sky above. Next, power the unit up by turning the on/off/volume towards you.
Operation Operating Instructions 3. Adjusting the volume The SL3 has an adjustable volume for controlling the loudness of the audible alert. To increase the volume simply turn the volume control on the right hand side of the device, towards you. To decrease the volume of the alert turn the volume control away from you. OFF • 2 • SA O GP S R 4. Adding your own locations It is possible to add your own personal locations to your SL3.
Operation Operating Instructions Alerts The Cobra SL3 responds to four types of alerts: Speed Trap, Photo Enforcement (Red Light and Speed Cameras), Caution Areas (high accident locations) and User Points. The audio alerts are sounded whenever the SL3 crosses the boundries as shown in Table 1 and Figure 1. The Audio Warnings are shown in Table 2. Table 1 SPEED RANGE ZONE BOUNDARY MPH 1 1 - 45 Greater than 45 2 3 1000 ft. 500 ft. 150 ft. 2500 ft. 1250 ft. 400 ft.
Operation Operating Instructions Alerts (continued) Visually, the zones are indicated with the 5 LEDs flashing while within the zones: ZONE 1: Outer green LEDs flash. ZONE 2: Outer green and middle amber LEDs flash. ZONE 3: The green, amber and center red LEDs all flash.
Operation Troubleshooting Troubleshooting The unit cannot be switched on Check that the cigarette lighter adapter is well inserted into the cigarette lighter socket and that the cigarette light socket is functioning properly. Check that the lighter socket is clean and free from debris. Also check that the fuse in the cigarette lighter adaptor is functioning correctly. The unit cannot acquire satellites Check that the Cobra SL3’s built-in GPS antenna has a clear view of the sky above.
Warranty Limited 1-Year Warranty For Products Purchased In The U.S.A. Cobra Electronics Corporation warrants that its SL3 GPS Safety Locators, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A.
Service Info Product Service and Trademark Acknowledgement Product Service If you have any questions about operation or installing your new Cobra product, or if you are missing parts… Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE! See customer assistance on page A1. If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping it to Cobra. This will ensure that you receive service as quickly as possible.
The Cobra line of quality products includes: CB Radios microTALK® Radios Radar/Laser Detectors Safety Alert® Traffic Warning System HighGear® Accessories CobraMarine® VHF Radios Power Inverters Accessories For more information or to order any of our products, please visit our website: www.cobra.
