Operating instructions

Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
Nothing comes close to a Cobra
®
21
Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
20
English
Spectre 1 Alert
The detector is undetectable by Spectre 1 detection devices and will alert
you when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show
Spectre 1 Alerts. With Spectre 1 Detect mode on, you can
also choose whether or not you want your unit to sound audible Spectre 1
Alerts. The factory settings are Spectre 1 Detect on, Spectre 1 Audio on.
Spectre 1 Detect Off
Spectre Off
Spectre 1 Detect On
Spectre On
Spectre 1 Audio Off
...Audio Off
Spectre 1 Audio On
...Audio On
SmartPower
Your detector includes the SmartPower feature that, when activated,
will put the unit into Standby mode (low power) for about 30 minutes
after the car’s engine has been turned off. After 30 minutes in Standby
mode, the unit will automatically turn off.
Before SmartPower enters Standby mode, you will hear one beep and
Pwr Save will appear on the display. To return the unit to normal Power
mode or exit Standby mode, start the car, press any button or turn the unit
off and then on again. The factory setting is SmartPower on.
SmartPower Entering
Standby Mode
Pwr Save
SmartPower Off
...Power off
SmartPower On
...Power on
To turn Spectre 1 Detect Mode off or on using Program Mode
(See page 7 For instructions on using Program Mode)
In Program mode,
go to Spectre 1 Detect.
Tone Visual Display
One beep Spectre Off
Two beeps Spectre On
To turn SmartPower Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to SmartPower.
Tone Visual Display
One beep SmartPower Off
Two beeps SmartPower On
To turn Spectre 1 Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to Spectre 1 Audio.
Tone Visual Display
One beep Spectre Audio Off
Two beeps Spectre Audio On