Use and Care Manual

Copyright © 2011, CobraCo
®
Mfg., Inc.
Woodstream
®
Corporation
69 North Locust Street • Lititz PA 17543-1714
Phone: [phone]
Website: www.avantgardendecor.com
E-mail: [e-mail]
Steel Mission Fire Pit
2
Parts Enclosed
A. Base (1)
B. Spark Guard (1)
C. Leg (4)
D. Handle (1)
E. Bracket (4)
F. Screw (8)
G. Hex Nut(9)
H. Guard Removal Tool(1)
I. Vinyl Cover (1)
* Please check enclosed parts shipped with
the Fire Pit. If any parts are missing, do
not return the item to the retailer.
 Pleasecontactusrstforreplacement
parts.
Please e-mail (for quickest response)
[e-mail] or call
1-800-323-5800
1. Install 1 leg (C) to each corner of Base (A) using
2 screws (F), 2 Hex Nuts (G) and 1 Bracket (E).
Bracket (E) must be installed with ange toward
top.
2. Install Handle (D) to Lid (B) using 1 Hex Nut (G)
threaded on Handle from inside of Lid.
3. Spark Guard should rest on top ange of Brackets
(E) when properly assembled.
Fire Pit Assembly Instructions
A
C
F
B
D
E
G
H
I