CX-CD377 Micro CD Player Stereo System with AM/FM Tuner INSTRUCTION MANUAL Please read this manual carefully before operation.
PRECAUTIONS The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
PRECAUTIONS ON PROTECTION AGAINST LASER ENERGY EXPOSURE As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is still open. If the unit is not to be used for a long period of time, make sure that all power sources are disconnected from the unit.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions: All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions: The safety and operating instructions should be retained for future reference. 3. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions: All operating and usage instructions should be followed. 5. Cleaning: Unplug this product from the wall outlet before cleaning.
IMPORTANT SAFETY INSTRUCTIONS 12. Grounding or Polarization: This product may be equipped with a polarized alternating-current line plug that has one blade wider than the other. This plug will only fit into the power outlet in one direction. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the direction of the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet.
IMPORTANT SAFETY INSTRUCTIONS 16. Lightning: For added protection for this product, unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning or power-line surges. 17.
IMPORTANT SAFETY INSTRUCTIONS 24. Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 25. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. www.cobyusa.
COMPLIANCE WITH FCC REGULATIONS This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CD CARE & MAINTENANCE Handling CDs Hold a CD by its edges. Avoid touching the recorded side of the disc. To remove a CD from its storage case, press down on the center retention mechanism of the case and lift the disc out. Cleaning CDs Use a dry, soft cloth to wipe off any fingerprints and dusts from the playing surface of the disc. Wipe in a straight line radially from the center to the outside edge of the disc. Small dust particles and light stains will not affect playback quality.
TABLE OF CONTENTS PRECAUTIONS............................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS............................................ 4 COMPLIANCE WITH FCC REGULATIONS.................................... 8 CD CARE & MAINTENANCE......................................................... 9 Handling CDs.......................................................................................... 9 Cleaning CDs.........................................................
TABLE OF CONTENTS AUX MODE.................................................................................. 21 Basic Operation.................................................................................... 21 SETUP MODE................................................................................ 22 Clock/Display........................................................................................ 22 TROUBLESHOOTING...................................................................
PACKAGE CONTENTS Please make sure the following items are included in the package. If any items are missing, contact your local dealer. CX-CD377 Main Unit Stereo Speakers (x 2) Remote Control 3.
FEATURES Vertical Loading CD Player Multi-Function Backlit LCD Display Electronic Volume Control Analog AM/FM Stereo Tuner (Rotary Tuning, Digital Readout) Dynamic Bass Boost System (DBBS) Full-Range Speaker System 110/220V Dual Voltage www.cobyusa.
GETTING STARTED CX-CD377 at a Glance Page 14 Coby Electronics Corporation
GETTING STARTED Bottom View Remote Control 1. AC Power Cord 1. Power/Standby 2. Speaker Out Jacks (Left, Right) 2. Program Voltage Selector (110/220V) 3. Play/Pause 4. Stop 5. Next 6. Previous 7. Volume Up 8. Volume Down 3. 11. Mounting Slots 23. FM Antenna Lead Top View 4. Power (On/Off) 5. Power Indicator 6. Function Switch (CD/Aux/Radio) 7. Bass Switch (On/Off) 8. Auxiliary Line-In Jack 9. Volume Down / Up / 10. Remote Sensor 12. Play/Pause 13. Stop 14.
GETTING STARTED Mounting the CX-CD377 To mount your CX-CD377 to either a wall or the pedestal base: 1. Using 4 screws, affix the mounting plate to either a wall or to the pedestal base. 2. Align the 4 mounting slots on the bottom of the main unit to hang on the hooks of the mounting plate.
GETTING STARTED Connections Speakers Always connect the speakers before connecting the power supply. Connect the black wire of the left speaker to the black terminal marked “L-” on the rear of the main unit. Connect the red wire of the left speaker to the red terminal marked “L+” on the rear of the main unit. Connect the black wire of the right speaker to the black terminal marked “R-” on the rear of the main unit.
CD MODE Basic Operation 1. Press POWER to turn the player on. 2. To open the CD Door, press . Insert a CD with its label facing up. Close the CD Door (it will click into place). 3. Set the FUNCTION switch to the “CD” position. 4. Press to start CD playback. CD Functions Play/Pause/Stop Press to start playback. Press during playback to pause. Press playback. Press again to resume during playback to stop the disc. Previous/Next (Skip) Press to skip to the previous track.
CD MODE Repeat/Random Mode Press to set the repeat/random mode of the player. Each successive press of will change the mode as follows: Repeat One: repeat the current track (flashing REPEAT display) Repeat All: repeat the entire CD (steady REPEAT display) Random: play all tracks in random sequence (steady RANDOM display) Normal/Off: play all tracks in sequential order (no indicator) Program (Memory) Press Program to set a custom sequence of up to 20 tracks to be played. 1. Press 2.
RADIO MODE Basic Operation 1. Press POWER to turn the player on. 2. Set the FUNCTION switch to the “Radio” position. 3. Set the BAND SELECTOR switch to: AM: Listen to AM broadcasts. FM: Listen to FM Mono broadcasts (use this setting if reception is weak). FM ST: Listen to FM Stereo broadcasts. Tuning Turn the AM/FM Tuning Dial down to tune to a lower station frequency. Turn the AM/FM Tuning Dial up to tune to a higher station frequency.
AUX MODE Auxiliary (Aux) mode allows you to play any audio device (e.g., MP3, cassette player, etc.) through your CX-CD377 system. Basic Operation 1. Use a 3.5mm male-to-male line-in cable to connect the Line-out or Headphone out jack of an audio device to the CX-CD377 Auxiliary Line-In jack. 2. Press POWER to turn the player on. 3. Set the FUNCTION switch to the “AUX” position. 4. Start playback on the external audio device.
SETUP MODE Clock/Display 1. Place in the player in Standby mode (press POWER if the player is currently on). The time will be displayed when the player is in Standby. 2. Press flash. Press to enter Setup mode. The 12H/24H setting will or to change the setting. 12H: Displays the time in 12-hour time. 24H: Displays the time in 24-hour time. 1. Press . The hour setting will flash. Press to change the setting. 2. Press . The minutes setting will flash. Press to change the setting. 3.
TROUBLESHOOTING If you have a problem with this device, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. COBY Electronics Technical Support Address: 56-65 Rust St.
TROUBLESHOOTING The sound is distorted. The unit may be positioned too closely to a large appliance (e.g, a TV or refrigerator). If possible, turn the appliance off or move the unit to another location. Ensure that the radio is in broadcast reception range. Decrease the volume level. The remote control doesn’t work. Ensure that there are no obstacles between the remote and the player. Point the remote at the remote sensor on the main unit. Strong light (e.g.
SPECIFICATIONS Power Supply AC 110/220V 60/50Hz (Dual Voltage) Tuning System AM: 530 - 1710kHz FM: 88 - 108MHz Audio Output Stereo Speakers (x2) Audio Input 3.5mm Aux Line-In Output Power 2.2W RMS x 2 Speaker Dimensions 4.33” x 8.07” x 6.38” (WHD) Unit Dimensions 11.46” x 3.03” x 7.91” (WHD) Net Weight 6.28 lbs Specifications and manual are subject to change without notice. www.cobyusa.
NOTES Page 26 Coby Electronics Corporation
NOTES www.cobyusa.
COBY Electronics Corp. 56-65 Rust Street Maspeth, NY 11378 www.cobyusa.com www.ecoby.
