User's Manual

blue and half green.
b) Phone Settings - check whether the app messages are allowed to display on your
phone.
c) Check whether unread messages displayed on the phone notification board.
4. Common troubleshooting
In case there is a problem duringusing of your watch, please solve it accordingly
by the following ways. If the problem retains unsolved, please contact thelocaldealer
or the designated service representative.
4.1 Cannot be powered on
* Please keep pressing the power button for at least 3 seconds.
* Make sure your watch has enough battery power, please rechargeand start it
again (It is easier to charge under an output power of 5V2A, it may take more
than 30 minutes for computer charging).
4.2、Shut down automatically
It is possible that battery is used up. Please rechargeand start it again.
4.3、 Short use time
* Make sure the battery has been completely charged. (At least two hours)
*Check if watch Bluetooth is always on and synced with your phone, which
requires a large current while using it.
4.4、Cannot be charged
*
Check if the battery can be used. The performance of battery may become worse
after several years.
* Check if the charger is working properly, (both the adapter and cable), if not, try
another one.
* Check whether the watch charge interfaces and cable are normally connected，if not,
try again.
4.5 Caller’s name is not displayed
* When your watch is paired with your phone, please check whether the contacts
on your phone are synced to watch, whether you select to sync contacts.
*
Release the connection. please allow the contacts to be synchronized while you
are pairing your watch and phone again.
4.6 Bad call quality
*Our watch may not in the normal Bluetooth range of your phone(about10