Instruction manual
Page 8 Coby Electronics Corporation
www.cobyusa.com Page 9www.cobyusa.com Page 9
English
After deactivating the connection, the speaker-
phone will wait 10 minutes and then power o.
The blue LED will ash twice at 3-second intervals
to indicate that there is no active connection be-
tween the speakerphone and another device.
Multipoint connections
The Multipoint feature allows you to connect up to
mobile phones to the speakerphone at the same time.
Activating the Multipoint Feature
The default setting of speakerphone’s multipoint function
is o. To use the multipoint function, you must activate it
manually.
In standby mode, press and hold VOL+ for seconds
until you hear a beep. The multipoint function is now
active.
To deactivate the multipoint function, press and
hold VOL- for seconds until you hear a beep. The
speakerphone will turn o the multipoint function
and power o automatically. When you turn on the
speakerphone again, it will connect automatically to
the most recently paired Bluetooth device.
When the multipoint function is enabled, the speak-
erphone will automatically connect to the last 2
cellular phones with which it has been paired.
Getting Started