CX-788 Operation Manual DIGITAL TUNING FM/AM/TV/NOAA RADIO 2 1 3 4 5 7 6 8 9 10 15 16 11 12 13 17 21 22 14 18 19 20 . Handle Bar . DX / Local Switch . Antenna . DC Jack . Hour / Tuning Down 4. LCD 4. Minute / Tuning Up 5. Hold Switch 5. Sleep . Volume Control Dial . Power 7. 3.5mm Earphone Jack 7. Light 8. Number Buttons 8. Time Set / Memory 9. Band / Alert Button 9. Time 0. Enter Button 0. Snooze . Battery Compartment (Rear) .
PRECAUTIONS . Read these instructions carefully. . Keep these instructions for future reference. . Heed all warnings. 4. Follow all instructions. 5. Do not expose to water or moisture. . Clean only with a dry cloth. 7. Keep objects away from ventilation openings. Do not block any ventilation openings at any time. 8. Do not install near any heat sources such as stoves, radiators, amplifiers or any apparatus that produce heat. 9. Do not force the power plug in the wall outlet.
POWER SOURCE BATTERY OPERATION . Open the battery cover. . Insert 3 “D” size (UM-1 or equivalent) batteries into the battery compartment, making sure that the batteries are installed with the proper polarities (“+” and “-”). TO PREVENT POSSIBLE DAMAGE TO THIS UNIT . Load new batteries with their polarities (“+” and “-”) aligned correctly. . If the radio will not be used for a long time, remove all of the batteries, and store them in a cool and dry place. .
TUNING AUTOMATIC TUNING Press and hold the TUNING DOWN / UP button to tune to the previous / next station. MANUAL TUNING Press the TUNING DOWN / UP button to change the frequency down / up by one step. DIRECT TUNING Use Direct Tuning to enter a specific station frequency to tune to directly. In the AM/FM mode, press the ENTER button to enter the direct tuning mode. Press the NUMBER buttons to enter the desired frequency, and press the ENTER button.
ALARMS . Turn off the radio. . Press the TIME SET / MEMORY button twice. “AL1” will appear on the bottom of the LCD, and the alarm 1 time will flash. Press the HOUR and MIN. buttons to adjust the alarm 1 time. Ensure that the AM/PM is set correctly. Press the TIME SET / MEMORY button. . “AL2” will appear on the bottom of the LCD, and the alarm 2 time will flash. Press the HOUR and MIN. buttons to adjust the alarm 2 time. Ensure that the AM/PM is set correctly. Press the TIME SET / MEMORY button. 4.
SUPPORT If you need assistance with this product, please contact technical support. COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378 Email: techsupport@cobyusa.com Web: www.cobyusa.com Phone: 800-727-3592 (8:00 AM–11:00 PM EST, seven days a week) 800-681-2629 (8:00 AM–5:30 PM EST, Monday to Friday) 718-416-3197 (8:00 AM–5:30 PM EST, Monday to Friday) SPECIFICATIONS Power Source: 3 “D” Size/UM-1 Batteries (DC: 4.5V) Frequency Range: AM 520 – 1710 kHz FM 87.
