COBY OPERATION MANUAL CX-CD400 MINI PORTABLE CD STEREO SYSTEM WITH AM/FM TUNER
LOCATION OF CONTROLS Front View SideView RearView
LOCATION OF CONTROLS (Cont.) 1. PAUSE BUTTON 2. STOP/EJECT BUTTON 3. FAST FORWARD BUTTON 4. REWIND BUTTON 5. PLAY BUTTON 6. RECORD BUTTON 7. CASSETTE COMPARTMENT 8. BAND SWITCH 9. TUNING KNOB 10. FM STEREO INDICATOR 11. REPEAT BUTTON 12. CD FORWARD SKIP/SEARCH BUTTON 13. CD PLAY / PAUSE BUTTON 14. VOLUME CONTROL 15. RADIO DIAL SCALE 16. DIAL POINTER 17. PLAY/PAUSE INDICATOR 18. LED DISPLAY 19. REPEAT 1/ALL INDICATOR 20. PROGRAM INDICATOR 21. REMOTE SENSOR 22. CD STOP BUTTON 23.
GENERAL OPERATION POWER SOURCES Before connecting the Unit to an AC outlet, check that the operating voltage of the Unit is identical with the voltage of your local power supply. Connect the supplied AC power cord to the AC in jack. BATTERY OPERATION Switch the AC/DC selector to DC position. Open the Battery Compartment Door and insert 8 UM-1 D size batteries, making sure that the indicated battery polarity is observed. Note: The AC cord must be completely disconnected if no AC/DC selector switch.
STEREO HEADPHONE JACK For private listening, insert the plug of a Stereo Headphone into the Stereo Headphone JACK and adjust Volume Control Knobs, accordingly. During the use of headphone, the External Speakers are automatically disconnected. CASSETTE OPERATION Tape A playback only. Depress the Stop/Eject Button to open the cassette door, insert a cassette into the door and push the cassette door to close. Slide the Function Switch to the TAPE position.
RECORDING A. RECORDING FROM THE BUILT-IN RADIO 1. Tune into the desired station. 2. Load a cassette into the TAPE b cassette compartment 3. Press the PAUSE button of TAPE B 4. Press the RECORD button of TAPE B, which also engages the PLAY button. 5. Press the PAUSE button again to begin recording. B. DUBBING Tape A Tape B Insert the tape to be copied into the Tape A Cassette Door. Insert the blank tape into the Tape B Cassette Door. Slide the Function switch to the Tape or Dubbing position.
CD PLAYBACK 1 Slide the FUNCTION switch to CD position. 2 Press the CD Open/Close button to open the CD compartment. 3 Place a CD on the spindle, label side up. 4 Close the CD compartment. The total number of tracks will be displayed. If the compartment is not close or there is no disc, “- -” sign will be displayed. 5 Press the PLAY/PAUSE button to start playback from the first track and the track number displayed during playback. The ‘Play/Pause LED Indicator’ is light up.
WARNING 1. TO PREVENT FIRE OR SHOCK HAZARD. 2. DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. 3. DO NOT REMOVE COVER. 4. PILOT LAMPS SOLDERED IN PLACE. 5. NO USER SERVICEABLE PARTS INSIDE. 6. REFER SERVICING TO QUALIFIED SERVICE PERSONEL. MAINTENANCE CLEANING THE TAPE HEADS Clean the heads frequently to remove dust and tape residue. Dirt on the heads will impair the sound quality of both recording and playback. There are two methods for head cleaning A.
