DVD-536 5.1-Channel Progressive Scan DVD Player Instruction Manual Please read this manual carefully before operation.
PRECAUTIONS For Customer Use: Enter below the serial number that is located on the bottom of the unit. Retain this information for future reference. Model No. DVD-536 Serial No. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions: All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions: The safety and operating instructions should be retained for future reference. 3. Heed Warnings: All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions: All operating and usage instructions should be followed. 5.
IMPORTANT SAFETY INSTRUCTIONS 13. Power Sources: This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions. 14.
IMPORTANT SAFETY INSTRUCTIONS size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode (see figure). 18. Lightning: Lightning can cause power surges, which may damage or destroy your product. For added protection, unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
TABLE OF CONTENTS PRECAUTIONS...................................................................................................2 IMPORTANT SAFETY INSTRUCTIONS................................................................3 TABLE OF CONTENTS........................................................................................6 ABOUT OPTICAL DISCS....................................................................................8 Disc Requirements..........................................................
TABLE OF CONTENTS Adjusting the Volume....................................................................................... 25 PLAYER FUNCTIONS.......................................................................................26 Menu / Title...................................................................................................... 26 Setup............................................................................................................... 26 On-Screen Display......................
ABOUT OPTICAL DISCS Disc Requirements This DVD player supports playback of the following discs. Type Disc Mark Content Type Disc Size Max. Playback Time 133 min (SS-SL) Audio + Video (moving picture) Digital Video Disc (DVD) 12 cm 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) Audio Compact Discs (CD) JPEG Picture CD -- Audio 12 cm 74 min Still Picture 12 cm -- This unit can play back CD-R and CD-RW discs that contain audio titles or JPEG picture files.
ABOUT OPTICAL DISCS Some of the DVD features enabled by this player depend on how the DVD was produced. Some features may not be enabled if the disc does not support the feature, or it may require special settings. Check the features printed on the DVD package or follow the instructions found on the disc’s on-screen menu. DVD Region Codes DVD discs and DVD players are manufactured under a compulsory worldwide agreement, the DVD Regional Code System.
ABOUT OPTICAL DISCS • Do not subject discs to prolonged exposure to direct sunlight, high humidity, or high temperatures. • Do not bend or press discs. • To reduce the risk of scratches, always put discs back in their case after use. Store discs vertically in a cabinet. • Do not place stickers or labels on either side of a disc. Cleaning a Disc Use a dry, soft cloth to wipe off any fingerprints and dusts from the playing surface of the disc.
FEATURES • Progressive Scan DVD Player • Compact and Slim Design • DVD, DVD±R/RW, CD, CD-R/RW, and JPEG Compatible • Dolby Digital Decoder • 5.1-Channel Audio for Surround Sound Systems • Optical, Digital, and Analog AV Outputs for Home Theater Use • NTSC/PAL Compatible • Convenient Front Panel and On-Screen Display • Multiple Language, Subtitle, and Camera Angle Support • Picture Zoom Function • Parental Lock Control • 100-240V Automatic Power Switching www.cobyusa.
GETTING STARTED DVD-536 at a Glance Front Panel Rear Panel 1. Power Button 11. AC Power Cord 2. Power Indicator 12. Component Video Out (Progressive Scan - 480p) 3. Disc Tray 13. Composite Video Out (Interlaced - 480i) 4. Front Panel Display 5. Open/Close Button 14. S-Video Out (Interlaced - 480i) 6. Remote Sensor 7. Previous/Reverse Button 15. 2-Channel Audio Out: L (Left Channel) R (Right Channel) 8. Next/Forward Button 9. Stop Button 16. Coaxial Digital Audio Out 10. Play/Pause Button 17.
GETTING STARTED Remote Control 1. Power/Standby 1 2. Open/Close 3 3. Display 2 5 4 6 4. Menu 5. Title 7 6. Numeric Keypad 7. Clear 8 8. Reverse 11 9. Play/Pause 10. Forward 12 15 16 20 19 24 23 28 27 21 14 11. Previous 9 10 13 17 18 12. Stop 13. Next 14. Reset 15. Go To 16. Program 17. Setup 18. Navigation Keypad Left / Right: Up / Down: Enter: 22 25 26 29 30 / / 19. Angle 20. Zoom 21. Slow 22. Volume Up 23. Playback Control 27. Subtitle 24. Audio 28. Repeat A-B 25. Step 29.
GETTING STARTED The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the infrared remote sensor during operation. The sensor may not be able to receive signals properly if the sensor is covered, if there is a large object between the remote control and the sensor, or if it is exposed to direct sunlight or a strong artificial light (e.g., fluorescent or strobe lights).
CONNECTIONS Composite Video or S-Video Connection Composite Video Connect only ONE type of video connection to your TV to avoid interference S-Video The Composite Video and S-Video jacks of the DVD player are capable of outputting video at a resolution of 480i (480-interlaced). Connect the AC power cord to the wall outlet AFTER all other cables are connected. Connect only one type of audio or video connection at a time to minimize interference.
CONNECTIONS • The DVD player is equipped with composite Audio/Video (AV) outputs located on the rear panel (yellow/red/white). Your TV will require at least one set of AV inputs. The supplied AV patch cable will connect your player’s AV outputs to your TV’s inputs. • • Depending on the model, the DVD player may be equipped with either 2channel stereo or 5.1-channel surround sound outputs. Stereo or surround sound will require a Stereo TV or Surround AV receiver, respectively.
CONNECTIONS Component Video Connection (Progressive Scan) The Component Video jacks of the DVD player are capable of outputting video at a resolution of 480p (480-progressive). 480p is the native format of DVD video. The Component Video connection must be enabled in the Setup menu prior to use. Please refer to the Setup section for more details. Blue (Cb) Red (Cr) Component Video Green (Y) Connect the AC power cord to the wall outlet AFTER all other cables are connected.
CONNECTIONS Audio Connections Use one of the following connections only to avoid signal interference: 1. 2-Channel Stereo Audio Out 2. 5.1-Channel Surround Audio Out (requires a surround sound amplifier) 3. Coaxial Digital Audio Out (requires a digital decoding amplifier) 4. Optical Digital Audio Out (requires a digital decoding amplifier) 2-Channel Stereo The DVD player is equipped with 2-channel RCA Stereo Audio outputs located on the rear panel (L, R).
CONNECTIONS 5.1-Channel Surround The DVD player is equipped with 5.1-channel RCA Audio outputs located on the rear panel (FL, FR, CENT, SL, SR, SW). Connect the player’s audio outputs to a 5.1-channel surround sound amplifier. TV with AV Input Component, Composite, or S-Video Connection SR SL FL FR SW CENT 5.1-Channel Surround Amplifier To 5.1-Channel Audio Input of Surround Amplifier 5.
CONNECTIONS Digital Output can be output in two formats: Raw or PCM. For more information, please see the “Setup > Audio Settings” section of this manual or refer to your amplifier’s documentation. Set the amplifier to the output mode that corresponds to the DVD player. Refer to the amplifier’s user guide for help Optical Digital Audio The DVD player is equipped with an Optical Digital Audio output located on the rear panel.
CONNECTIONS Power Supply This unit should be used with 100-240V ~50/60Hz AC wall outlets, only. Complete all system connections first before connecting the power. Do not connect the power plug to a power outlet other than that which is indicated here and on the rating label as this may result in the risk of fire or electric shock. Do not handle the power plug with wet hands. Doing so may cause electric shock.
BASIC OPERATIONS All key instructions refer to the remote control unless indicated otherwise. Some operations may be controlled by the buttons on the main unit. Basic Playback 1. Prepare the connections and power supply. Press to turn the player on. 2. Select the video line. Set your TV to display the video line connection that corresponds to your DVD player (e.g., AV1, AV2, Component, S-Video, DVD, etc.) The DVD output will be displayed on the TV screen when the proper line has been selected.
BASIC OPERATIONS • Press (When when the disc is “Pre-Stopped” to stop playback completely. is pressed, the disc will start playing from the beginning.) Next/Previous (Skip) • Press to skip to the next track (DVD, CD, etc). • Press to return to the previous track (DVD, CD, etc). Forward/Reverse (Search) • Press to fast forward through the current track. Press sume normal playback. • Press to reverse through the current track. Press normal playback.
BASIC OPERATIONS Disc Error Messages The following messages will be displayed on screen if there is a problem with the format of the loaded disc. • Invalid Region. The region code of the disc does not match the player’s region code (Region 1). • Enter Password. The parental rating level of the disc is higher than the parental rating level setting of the player. The player will not play the disc unless the correct password is entered. • Wrong Disc.
BASIC OPERATIONS Numeric Keypad • Use the Numeric Keypad to skip directly to a DVD chapter or CD track. (Some discs may not allow direct access function.) • Use the “+10” key to access track numbers higher than 9. To access Track 22, press “+10” twice, and then press “2” (“10” + “10” + “2” = “22”). • Use the Numeric Keypad to input numbers in menu option fields, where possible. • Press to cancel an entry. Some DVDs may not allow direct track access. Adjusting the Volume • Press spectively.
PLAYER FUNCTIONS Some of the features and functions enabled by this player depend on how the DVD was produced. A function may not be enabled if the disc is not mastered to support it, or it may require special settings. Check the features printed on the DVD package or follow the instructions found on the disc’s on-screen menu. All key instructions refer to the remote control unless indicated otherwise. Some operations may be controlled by the buttons on the main unit.
PLAYER FUNCTIONS Repeat A-B Mode To repeat a specific section of a disc (play on a loop): 1. Press repeated. to set the desired start point (“A”) of the section to be 2. Press repeated. again to set the desired end point (“B”) of the section to be 3. The section “A-B” will now play repeatedly as a loop. Press to resume normal playback. again Multi-Angle/Subtitle/Audio • During playback of a DVD that has been mastered with multiple angles, press to view the available alternate camera angles.
PLAYER FUNCTIONS The picture quality will decrease as the zoom level (magnification) increases. Program Change the order in which tracks are played (Normal, Random, Program). Press • to view the Program Mode menu. Use the Navigation Keypad to select a program mode and then press Program Mode . Description Select “Normal” to play tracks in normal sequential order. Select “Random” to play tracks in random order. Select “Program” to play tracks in a custom order.
PLAYER FUNCTIONS DVD Program List Select “Program” from the Program Mode menu during DVD playback. • Use the Navigation Keypad to select a field. The left column designates the program order number. • Use the Numeric Keypad to enter track numbers in the left “Tt” columns (or press • Use the numeric keypad to enter chapter numbers in the right “Chp” columns (or press to delete). to delete). • To start over, use the Navigation Keypad to select “Clear All”. All Track/Chapter selections will be cleared.
SETUP Enter Setup mode to adjust the various internal settings of the player. Make sure the player has been completely stopped before entering Setup mode. 1. Press to enter Setup mode. 2. Use the Navigation Keypad to select a desired item. 3. Press to confirm a selection. 4. Press to exit Setup mode (or select EXIT and press ). Language Settings Use the Navigation Keypad to highlight the desired language selection and press to confirm.
SETUP Display Settings Use the Navigation Keypad to highlight the desired display selection and press to confirm. Item Description Default Setting Sets the aspect ratio of the display. • 16:9 is used with widescreen television displays. Aspect Ratio • 4:3 L-Box (Letterbox) is used with standard television displays. Widescreen content will be displayed with black bars at the top and bottom of the screen. 4:3 L-Box • 4:3 PS (Pan & Scan) is used with standard television displays.
SETUP Audio Settings Use the Navigation Keypad to highlight the desired audio selection and press to confirm. Item Description Default Setting SPDIF Digital Sets the digital audio output signal type (PCM, RAW, OFF). Digital audio output requires a connection to a digital decoding receiver (see your receiver’s manual for more information). RAW Channel Output Sets the audio channel mix mode (LT/ RT, Stereo, 5.1 Channel). Stereo or 5.
SETUP Item Description Default Setting Sets the maturity rating level of the player. The player will not play any discs rated higher than this setting. There are eight rating levels. • Level 1 (Kid Safe) will restrict playback to discs suitable for people of all ages. • Level 8 (Adult) will allow playback of all discs, including those suitable for adults only. Rating Level • A setting of OFF will disable the Rating Level lock. 8 To change the rating level: 1.
TROUBLESHOOTING If you have a problem with this player, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378 Email: techsupport@cobyusa.com Web: www.cobyusa.
TROUBLESHOOTING DVD player. • Ensure that the connections between the player and the TV are secure and correct. • Ensure that the connection cables are not damaged. • Restore the player to it’s factory-default settings. Using the remote control: 1. Turn on the player and press 2. Press to open the disc tray. once. 3. Press six times. 4. Press twice. The picture is noisy or distorted. • The disc may be damaged or dirty. Clean the disc or try another one. • Reset the color system of the TV.
TROUBLESHOOTING The SKIP and SEARCH functions are not working. • Some DVDs are programmed to disable SKIP and SEARCH during certain sections (e.g., the Warning section at the beginning of DVD discs). • SKIP and SEARCH cannot be performed when playing single-chapter discs. The remote control doesn’t work. • Ensure that there are no obstacles between the remote and the player. • Point the remote at the remote sensor on the main unit.
SPECIFICATIONS Display Type Front Panel, On-Screen Disc/Media Support DVD, DVD±R/RW, CD, CD-DA, CD-R/RW, JPEG (Picture CD) Video Formats MPEG-2 Audio Formats MPEG-1 (Layer 1 & Layer 2) Video Output Component Video (Progressive Scan) S-Video Composite Video Audio Output Optical Digital Audio Coaxial Digital Audio RCA 5.
NOTES Page 38 Coby Electronics Corporation
NOTES www.cobyusa.
COBY Electronics Corp. 56-65 Rust Street Maspeth, NY 11378 www.cobyusa.com www.ecoby.
