DVD 5.
Contents Features & Package Contents.........................................................2 For your Attention........................................................................3-4 Panel............................................................................................5 Connections...............................................................................6-7 System Setup...........................................................................8-14 Remote Control........................
Features &Package Contents Thank you for purchasing our product. Please read this manual carefully before connection and operation and keep it for future reference. This DVD player is a next generation home player that can produce high quality video and audio for your continued enjoyment. Built in Dolby Digital , LPCM, MPEG etc. digital audio decoder HiFi, 96kHz/24bit audio digital processor COAXIAL digital audio output Compatible with DVD, CD, DVD+R/RW, DVD-R/RW, MP3, MPEG4, JPEG, etc.
For Your Attention IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
For Your Attention This symbol indicates important instructions accompanying the product. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside, Refer servicing to qualified service personnel. This symbol indicates that this product incorporates double insulation between hazardous maims voltage are user accessible parts. When servicing use only identical replacement parts. FCC Statement: This device complies with Part 15 of the FCC Rules.
Panel FRONT PANEL: POWER 1. POWER BUTTON 5. DISPLAY SCREEN 2. STOP BUTTON 6. MODE BUTTON 3. PLAY/PAUSE BUTTON 7. OPEN/CLOSE BUTTON 4. DISC DOOR 8. VOLUME KNOB REAR PANEL: 11 10 12 1 2 3 4 5 6 7 8 9 1. SPEAKER OUTPUT 7. COAXIAL DIGITAL AUDIO OUTPUT 2. LINE INPUT 8. SD/MS/MMC CARD PORT 3. HDMI OUTPUT 9. USB PORT 4. S-VIDEO OUTPUT 10. AM ANTENNA JACK 5. 2-CH AUDIO OUTPUT 11. FM ANTENNA JACK 6. COMPONENT VIDEO OUTPUT 12.
Connections 1 VIDEO SYSTEM CONNECTION The following video outputs are available for this unit . 1.1 Composite Video Use the cable with yellow plug of an AV cable to connect the composite video output of this unit to the video input of a TV/monitor. 1.2 S-Video Use a S-Video cable to connect the S-Video output of this unit to the S-Video input of a TV/monitor. 1. 3 Component Video Use a 3-core AV cable to connect the component outputs of this unit to the corresponding inputs of a TV/monitor. 1.
Connections 2 AUDIO SYSTEM CONNECTION (OPTIONAL) In addition to the 5.1-channel sound provided by this unit, the following optional audio outputs are available (2.1 - 2.3). R Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power amplifier. SW CEN SR SL FR FL + + - - 8 8 8 8 SPEAKERS 8 FL SPEAKER 2.
System Setup MENU OPERATION: 1. In DVD mode, press [SETUP] on the remote control to display the setup menu. 2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly. 3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter. Use [ ]/[ ] to select an option, then press [ENTER] to confirm it, or press [ ] to cancel. 4. Then you can press [ ]/[ ] to continue to set other items in the submenu. 5.
System Setup 1.6 LAST MEMORY ON: Each time you turn off the unit or stop the disc, it will memorize the last play time. Next time you turn on the unit and play the same disc, the unit will play from that memorized point. OFF: Disable the last memory function. 2 AUDIO SETUP PAGE There are eight items in the AUDIO SETUP PAGE. They are ANALOG AUDIO, D I G I T A L A U D I O , D O L B Y D I G I T A L , C H A N N E L D E L AY, E Q U A L I Z E R , 3 D PROCESSING and HDCD. 2.1 ANALOG AUDIO SETUP 2.1.
System Setup 2.2.2 LPCM OUTPUT When DIGITAL OUTPUT is set to PCM ONLY, this item is available. Select a sample rating for the analog audio output. There are two options, 48KHz and 96KHz. NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial output. 2.3 DOLBY DIGITAL SETUP 2.3.1 DUAL MONO STEREO: The player outputs the left-channel audio and right-channel audio via the FL and FR speaker respectively.
System Setup 2.5.3 SUPER BASS Set it to ON to get the super bass sound effect. 2.5.4 TREBLE BOOST Set it to ON to boost the treble sound. 2.6 3D PROCESSING 2.6.1 PRO LOGIC II Pro Logic II: This unit allows you to configure Dolby Pro Logic II to expand 2-channel source audio into full 5.1-channel surround sound. NOTE: Pro Logic II functionality is effective only when DOWNMIX is set to 5.1CH and DIGITAL OUTPUT is set to ALL. 2.6.1.
System Setup 3 VIDEO SETUP PAGE There are five items in the VIDEO SETUP PAGE. They are VIDEO OUTPUT, TV MODE, HD MODE, COLOR SETTING, and HDMI SETUP. 3.1 VIDEO OUTPUT OFF: Set video output to the CVBS (composite video). YUV: Set video output in analog component video format when the component video outputs are used. NOTE: If the video setting differs from the physical video connection, the TV set may have poor picture.
System Setup 3.5 HDMI SETUP About HDMI HDMI (High-Definition Multimedia Interface) is the newest interface for audiovisual equipment such as high-definition television and home theater systems. With 19 wires wrapped in a single cable that resembles a USB wire, HDMI is able to carry a bandwidth of 5 Gbps (gigabits per second). This is more than twice the bandwidth needed to transmit multi-channel audio and video, future-proofing HDMI for some time to come.
System Setup NTSC: If the connected TV is NTSC system which is used in Taiwan, America and Canada, etc, select this mode. It will change the video signal of a PAL disc and output in NTSC format. PAL : If the connected TV is PAL system which is used in China, Hongkong and Europe, etc, select this mode. It will change the video signal of a NTSC disc and output in PAL format. MULTI: If the connected TV is multi system, select this mode.
Remote Control OPEN/ CLOSE STANDBY 1 16 2 1 2 3 4 5 6 7 8 9 0/10 10+ 3 SOURCE 4 5 6 SEARCH TITLE 7 RADIO AM/FM AUTO 8 9 10 11 12 13 14 20 MO/ST MEMORY A-MODE V-MODE VOL- S.EFFECT PROG MUTE ANGLE A-B TONE STEP ZOOM CH-LEVEL REPEAT OSD 15 DVD-958 18. SOURCE 3. GOTO 19. STOP 4. SETUP 20. NEXT/ PREVIOUS 5. PLAY/PAUSE 21. MENU 6. FAST FORWARD/ REWIND 22. ENTER 7. TITLE 23. DIRECTION KEYS 8. AUDIO 24. SUBTITLE 9. VOLUME+ 25. A-MODE 10. SOUND EFFECT 26.
Remote Control Function STANDBY SOURCE Press to switch on the unit. Press it again to put the unit in standby mode. Press repeatedly to select a video/audio source among TUNER, LINE 1, LINE 2 and DVD. SETUP Press to enter/exit the setup menu. OPEN/CLOSE Press to open /close the disc tray. 1 2 3 4 5 6 7 8 9 0/10 10+ ENTER The digit keys can be used to input numbers or make selection of a track or a chapter, etc. Press to enter an item in the menu or to confirm and execute a selection.
Remote Control Function REPEAT Press repeatedly to switch the repeat modes. (Note: This function is invalid when the PBC function is activated.) DVD: CHAPTER(chapter repeat) TITLE(title repeat) ALL(repeat all) (cancel repeat) CD: TRACK(track repeat) ALL(repeat all) (cancel repeat) MP3: SINGLE REPEAT ONE REPEAT FOLDER FOLDER (cancel repeat) MPEG4: SINGLE REPEAT ONE REPEAT ALL REPEAT OFF(cancel repeat) A-B You can repeat a specific section of a disc with this button.
Remote Control Function ANGLE Press to switch the viewing angles. (Note: This function only works with the discs encoded with multiple camera angles.) V-MODE Press repeatedly to switch the video output modes between CVBS (OFF) and YUV. Press repeatedly to switch the audio output modes between 5.1 CHANNELS OUTPUT and STEREO OUTPUT. A-MODE ZOOM Press this button to zoom in/ out the scene. The available zoom ratios are: 2X, 3X, 4X, 1/2 X, 1/3 X and 1/4 X.
Playback JPEG PICTURE PLAYBACK Place a JPEG picture CD in the disc tray, then the unit will load the disc automatically. Press [ ] to enter the thumbnail mode to preview the pictures. In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to start the playback from the selected picture. In the thumbnail mode, use the direction keys and [ENTER] to make selections of the Slide Show, Menu, PREV or NEXT at the bottom of the screen. Slide Show: Start slide show playback.
Troubleshooting If you have a problem with this device, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Address Email Web Phone Symptom COBY Electronics Technical Support 56-65 Rust Street Maspeth, NY 11378 techsupport@cobyusa.com www.cobyusa.
Specifications Power supply Power consumption Working environment Temperature -10~+40 Relative humidity 5%~90% TV System PAL/NTSC Frequency Range Disc output S/N(A weight) Dynamic Range THD+NOISE Tuner AC ~110-120V/60Hz 210W WOW FLUTTER AM frequency Range FM band Range Power output (Max) Frequency response 20Hz~20KHz 80dB( 1KHz ) 70dB( 1KHz ) -60dB(1KHz) Below the limit of apparatus measure 522KHz~1620KHz 87.5MHz~108MHz 30WX5+60W 1.
