Specifications

Section
page
3
54
Home Audio/Theater
3
Fax: [phone] Customer Service: 1-877-626-3532
1-800-543-4330
NET 30
Terms
Audio LeveliZer
™
Line Level Stabilizer
Maintains a constant average output loudness, regardless
of the audio source type or loudness. Perfect for louder
than program commercials on radio and TV, and volume
variations between different broadcasting stations, records
and CDs (perfect for multi-disc players). Connect to the
tape loop of any amplifier or receiver, or between the pre-
amp and power amplifier, or between audio outputs of TV
or VCR and amplifier inputs. Because this device monitors
average input level, normal program dynamics experienced
in high action video scenes are maintained. Dimensions:
2
1
⁄8" (H) x 7
1
⁄8" (W) x 3
3
⁄4" (D) exluding control knob.
Black in color.
Order # MSRP ONLY
50-6155 $299.00 $242.00
Phono Preamplifier/
USB Interface
This high quality USB audio interface with standalone
RIAA phono preamp acts as an interface between your
computer and a wide variety of analog and digital sources.
Analog inputs are switchable between phono and line level
signals and a low cut filter removes rumble and wind noise
while leaving the audio pristine. The front panel USB
monitor/headphone
1
⁄8" jack and the optical output on the
rear panel can monitor audio output from your computer.
Line output jacks are always connected to the input
preamps signal for source monitoring. The unit may be
powered by an external power source or from USB port.
Optical TOSLINK in/outs and S/PDIF input let you use
this as a digital audio to USB interface as well. Fully
compliant with the USB 1.1 specification and uses USB
adaptive mode for playback and USB asynchronous mode
for record. It will work with the USB audio device drivers
built into Windows 98SE/ME/2000/XP or Macs with
native USB support OS9.1 or greater or OSX. No special
drivers required. Specifications: •Frequency response:
10Hz~50KHz •THD: .01% dB •A/D & D/A: 16 bit,
44.1KHz or 48KHz USB selectable •Power requirements:
7~12VDC or 9~12VAC, 150mA, or USB bus
•Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # ONLY
555-2717 $99.49
Front
Back
DJPRE-II Phono
Preamplifier
Since newer
receivers typically do
not include magnetic
phono connection, this pre–
amplifier is required to connect
a turntable to a conventional line
level input. It is also necessary if playing LPs through
a computer sound card, mixing console, or other
professional equipment. In addition to providing the
required gain, this unit also adds necessary RIAA
equalization to compensate for the industry standard EQ
curve utilized on LPs. Features: •L/R RCA inputs and
outputs •Adjustable ±10dB gain •Selectable 100pF/200pF
input capacitance •Switchable 3dB low cut at 22Hz
•Signal clip indicator •Turntable ground lug •Power
requirements: 7~12VDC or 9~12VAC •AC adapter
included •Dimensions: 1.75" (H) x 4.2" (W) x 3.5" (D)
Order # ONLY
555-2716 $49.49
Phono
Preamplifier
High-quality preamplifier
is built to the exacting
standards that made Audio-
Technica one of the largest
magnetic phono cartridge manufacturers in the world.
It is perfect when turntables need to be played through
conventional line level amplifier inputs. Use to connect a
turntable to newer home theater equipment, to a computer
sound card, mixing console, or other professional
equipment. In addition to providing the required gain, it
adds necessary RIAA equalization to compensate for the
industry standard EQ curve utilized on LPs. Unit features
L/R RCA female type inputs and outputs, plus a separate
ground lug. Specifications: •Frequency response:
20Hz~20KHz •S/N ratio: 80dB •Input sensitivity: 2.5mV
•Phono input impedance: 47Kohm •Power requirements:
15VDC, 20mA, AC adapter included •Dimensions:
1.18" (H) x 2.76" (W) x 3.62" (D)
Order # (1-3) (4-up)
50-7778 $99.99 $89.95
Phono Preamplifier
Allows a turntable to be played
through conventional line level
inputs such as aux, tape, tuner or
CD. It is also useful for operating
a turntable with a computer sound
card, mixing console, or other professional equipment.
Features: •L/R RCA female type inputs and outputs
•Separate ground lug Specifications: •Frequency
response: 30Hz~20KHz •Input level: 6mV •Output level:
500mV •SN ratio: >60dB •Requires 117VAC, 60Hz
•Dimensions: 1
1
⁄2" (H) x 2
5
⁄8" (W) x 4
7
⁄8" (D)
Order # MSRP (1-9) (10-up)
40-630 $24.95 $19.99 $17.95
24 Bit/96K D/A Convertor
This compact unit will accept standard coax or Toslink
SPDIF signal, and convert it to line level audio. It is
perfect when there is a need to send digital audio signal
to an amplifier not having digital inputs, including home
audio receivers, prosound amplifiers and mixing consoles.
It is perfect when an unused digital output on a piece of
home theater equipment needs to be sent to a separate
whole house audio amplifier. Features: •Two Toslink
inputs •Two coax inputs •Four-position input selector with
LED indication •
1
⁄4" headphone output with adjustable level
•Separate REC and AMP line level L/R RCA outputs (both
fixed level) •LED power indicator Specifications: •Digital
input: 96KHz (standard SPDIF) •Resolution capability:
24 bit •Amplitude linearity: 1.06dB •Frequency response:
20Hz~20KHz •Channel separation: 100dB @ 1KHz
•S/N ratio: 103dB •THD: <0.0015% •Digital filter:
82dB •Headphone output: 700mW, 8~32ohm
•Power requirements: 12VDC, AC adapter included
•Dimensions: 1
1
⁄2" (H) x 9
3
⁄4" (W) x 4
1
⁄2" (D)
Order # MSRP (1-3) (4-up)
50-7774 $179.00 $105.00 $89.95
Phono Input Attenuator
Device allows standard line
level items to be played
through magnetic phono
inputs, commonly found on
older home audio receivers
and mixing consoles. CD/
DVD/ MP3 players, tape
decks, VCRs, computer
sound cards and tuners may now be connected to
unused phono inputs. In addition to providing the
required signal attenuation, this unit provides passive
equalization to compensate for the RIAA curve that is
present on magnetic phono inputs. Inputs are RCA female,
outputs are male RCA connections on a 7" pigtail. Passive
device requires no power. Dimensions: 1" (H) x 2.25" (W)
x 3" (D)
Order # MSRP (1–3) (4–11) (12-up)
50-7240 $14.59 $10.99 $9.19 $8.29
Input Source Mixer/
Headphone Amplifier
Versatile table-top device
features two stereo line level
inputs and a single line level
output, allowing the user
to mix two sources into one.
Slide controls allow independent gain
adjustment for each source. Front panel
3.5mm stereo headphone jack, with slide level control,
is provided for monitoring of the mixed source. Compact
unit is perfect for any application requiring a low cost line
mixer, or headphone amplifier. Metal case has non-skid
rubber feet and stays securely in place. All connections,
except headphone, are RCA type female. Requires
12VDC, 100mA. AC adapter included. Dimensions:
1
3
⁄4" (H) x 5" (W) x 4
1
⁄2" (D). Black color.
Order # (1-4) (5-9) (10-up)
50-6182 $26.99 $24.95 $21.95
Dual Channel Ground
Loop Isolator
Ground loop problems in A/V
systems normally appear as a
hum in speakers or horizontal
bars on video monitors. These
problems typically occur when
multiple components receive AC power
from different locations, or because CATV, satellite or
antenna systems provide a separate ground point. This
isolator solves that problem by providing ground path
isolation between components, while maintaining full
frequency response. Features: •Rugged steel enclosure
•RCA input and output connections •Fully independent
L/R channels Specifications: •Frequency response:
10Hz~50KHz •THD: 0.01% •Dimensions: 1.50" (H) x
3.50" (W) x 2.50" (D) •Passive device, requires no power
Order # MSRP (1-3) (4-up)
50-9040 $49.95 $31.99 $26.95
Input Interface Cable for iPod™
5' cable allows connection of your iPod™ to any
amplifier with standard line level inputs. It is perfect for
use with home theater and distributed audio systems, as
well as autosound systems having RCA line level inputs.
Proprietary connector inserts directly into the bottom of
the iPod™ and provides fixed line level output through
L/R RCA male connectors. Cable assembly also provides
regulated power supply to the iPod™ allowing it to be
charged or powered from external 12VDC source.
Order # ONLY
50-9185 $17.99