Specifications

Section
3
page
49
Home Audio/Theater
3
MCMelectronics.com
Product Questions Email: [e-mail] Email: [e-mail]
Follow us on:
Eight Position Speaker Selector
Compact table top selector provides cost effective
selection of up to eight pairs of speakers, from one
location. It provides a perfect solution to the need for low
cost distributed audio in residential audio or commercial
sound applications. Internal switching uses a combination
of series and parallel wiring, ensuring that the connected
amplifier sees a minimum of a 4ohm load (when 8ohm
speakers are used). This means that any conventional
amplifier or stereo receiver can drive multiple sets of
speakers, without the need for external impedance
matching devices. Features: •Rugged metal enclosure
•Non skid rubber feet •Color coded push terminals for
all speaker connections •Heavy-duty rocker switches
•Attractive sloped top panel •Power capacity: 50W RMS
per channel •Frequency response: 10Hz~50KHz
•Dimensions: 2
1
⁄2" (H) x 12" (W) x 4
1
⁄4" (W)
Order # ONLY
50-6225 $34.99
Universal Wireless Speaker Conversion System
4Perfect for rear channel speaker installation
4Compatible with virtually any speaker
4Uncompress CD quality audio
Highly flexible modular wireless adapter system allows
untethered placement of speakers anywhere in a home theater room,
or throughout the house. They may even be used on temporary bases with
outdoor speakers. Complete ARW51 system consists of the AudioLink transmitter,
capable of sending 5.1 independent channels of audio to six separate receivers.
Five receivers have on board 60W RMS amplifiers, allowing them to
directly power any speaker system. The sixth has a subwoofer line
out, for driving any powered sub. ARW20 system includes the
AudioLink transmitter, and only two amplified receivers, perfect
for those rear channel speakers that often create wire routing issues.
Individual amplified receivers, and line level subwoofer receiver
are available separately, allowing total wireless speaker flexibility.
Because multiple receivers may be driven from a single transmitter
channel, these are a perfect solution for distributing sound throughout the residence. The system utilizes
channel hopping 2.4GHz technology, ensuring interference free performance. Uncompressed CD quality audio
transmits true, full frequency response audio, without loss of dynamic range. T
ransmitter and each receiver operate
from their own AC adapter. Amplified receivers have five-way binding post speaker outputs, subwoofer receiver
as female RCA line level out.
Order # Model # Description ONLY
50-6930 ARW51 Complete 5.1 system $599.99
50-6935 ARW20 AudioLink transmitter, (2) amplified receivers 249.99
50-6940 ARWR2 Individual 60W RMS amplified receiver 99.99
Eight Position Input Selector
Compact table top selector provides cost effective
selection of up to eight stereo sources into the line level
input of an amplifier. Ideal when multiple sources are
present, such as television, computer, portable media
players, CD or DVD players, and similar devices, and all
need to be switched into a single sound system Features:
•Rugged metal enclosure •Non skid rubber feet •Color
coded R/L RCA female input connections •Individual
pushbuttons for each input •Dimensions: 2
1
⁄2" (H) x
12" (W) x 4
1
⁄4" (W)
Order # ONLY
50-6202 $29.99
Table-Top Speaker Volume Control
4Single speaker pair control
4Headphone jack
4100W RMS capacity
Table-top control center provides external volume
adjustment for a single pair of speakers. 12 position rotary
control utilizes multi tapped transformers for efficient
power transfer, with no heat build-up. Rear speaker in/out
connections are heavy duty push terminal strips and accept
up to 14AWG wire. Heavy metal case has non-skid rubber
feet and stays securely in place. Dimensions: 1
3
⁄4" (H) x
7" (W) x 3
5
⁄8" (D). Silver color.
Order # (1-4) (5-9) (10-up)
50-6216 $34.99 $32.95 $29.95
Two-Way
Speaker
Switch Box
Tabletop
control box
allows
selection of
A/B speaker
pairs. Internal 220ohm resistors ensure that amplifier
always sees a load, even with both switches off. With
both speaker switches in “on” position, speaker pairs are
connected in series, allowing use of 4ohm or 8ohm speaker
systems, without damage to amplifier. 200W maximum
power capacity. All connections are push type. Metal case
has non-skid rubber feet and stays securely in place.
Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D). Sloped front,
black color.
Order # (1-5) (6-9) (10-up)
50-6185 $18.99 $17.95 $14.29
Speaker Selector Volume Control
4Volume adjustment in each zone
4
A/B source selection
4216W RMS capacity
These control boxes can operate multiple speaker pairs of
4, 8 and 16ohm impedance in any combination and can be
used with either one or two stereo amplifiers. This makes
it convenient to listen to different program material in
different rooms. 216W Optimatch™ attenuators are
employed so that worst case operating conditions will
appear as a 4ohm load to the amp. Made in USA.
Order # Speaker Pairs ONLY
50-2390 Six $399.00
50-2395 Four 199.00
Single
Channel
Amplifier Module
Compact amplifier
is perfect for any
general purpose
application where a
speaker needs to be driven from a line level signal. Its
compact size allows it to be mounted most any place,
and may be directly attached to the rear of a speaker
enclosure. It is ideal for a wide variety of hobby,
service and prototype applications. Features: •RCA
female input •Accepts line level or headphone level signal
•12" attached speaker leads •Barrel type power connector
Specifications: •Input: Line level (80mV) •Output:
12W @ 4ohm •Requires 6~16VDC, 800mA
•Dimensions: 1
5
⁄8" (H) x 2
7
⁄8" (W) x 2" (D)
Order # MSRP (1-4) (5-9) (10-up)
50-4605 $29.95 $14.99 $13.75 $12.75
Free Standing Stereo Volume Control
Intended for use when in-wall type controls are not
practical, this control is ideal for use with free standing
remote speaker systems. Features: •Removable terminal
strip for greatly eased installations •12 step attenuation
•Suction cup feet to hold the unit secure during use
Specifications: •Power capacity: 60W RMS •Frequency
response: 20Hz~20KHz •Dimensions: Overall depth:
2.19" (H) x 8.5" (W) x 6.5" (D) •Call for larger
quantity pricing
Order # (1-3) (4-11) (12-up)
50-8275 $92.99 $87.60 $78.80
NEW!
NEW!
NEW!
Ten Position Speaker Switch
Intended for PA or other monaural applications, this switch box
provides individual on/off control of up to ten speaker systems.
Power capacity is 100W RMS, internal progressive resistor network
keeps amplifier load to a minimum of 2ohm, when ten 8ohm
systems are selected. Rear speaker in/out connections are color
coded push connectors. Metal case has non-skid rubber feet and
stays securely in place. Dimensions: 8" (W) x 2
1
⁄4" (H) x 4
1
⁄4" (D).
Black color. Note: Because low resistance loads can be damaging to
some amplifiers, the customer must ensure that the total speaker
load will be within the limits of the equipment in use.
Order # (1-5) (6-9) (10-up)
50-6205 $18.99 $18.03 $14.68