Specifications

Section
page
3
52
Home Audio/Theater
3
Fax: [phone] Customer Service: 1-877-626-3532
1-800-543-4330
NET 30
Terms
SmartPath Infrared Repeating System
SmartPath’s easy installation and configuration allow installers to quickly create
a pathway of complete A/V system control. All components are available separately for
versatile configuration of any custom system. Emitters and receivers may be connected
with two pairs of 24AWG solid or stranded unshielded twisted pair wire, including standard
Cat 5, for distances up to 1200'. Heavier gauge cable can be used for distances of up to 5000'.
A complete system requires the following four basic components: •At least one infrared
receiver •One connecting block •As many emitters as needed to control A/V
components
•One DC power supply
Complete SmartPath
IR Repeater System
Take the guess work out of
setting up a typical one
room system with this
complete IR repeater kit,
everything is included in
one convenient package.
System includes: •One
IRC-3.0 shelf top receiver
•One AT-1.0 amplified
terminator unit •One PS-1.0
power supply •Four IRE-
1.0 IR emitters
Order # Mfr. # (1-3) (4-11)
50-8363 IRC-3.0 KIT $215.00 $204.00
Flush Mount Mini
IR Receivers
Compact receivers require only a
1
⁄2" hole, and
may be mounted flush in cabinets or walls,
leaving only a circular bezel exposed to the room. They
may also be mounted behind the grill of most in-wall
speakers. Each includes a set of four color bezels (almond,
black, bone and white), to match any décor. Also included
are two specially designed ALR (ambient light restrictor)
bezels, for use near plasma displays. Clearly visible
system status and IR activity LEDs provide positive
feedback to the user. Models include an 8' attached lead,
and are available with bare wire connections or
SpeakerCraft’s unique four-conductor 3.5mm plug.
Receivers provide a reception angle of 110° standard, 60°
with ALR bezel installed. Dimensions: •Unit:
15
⁄32"
diameter x 2
5
⁄8" (L) •Cap bezel:
47
⁄64" diameter x
1
⁄8" (L)
•ALR bezel:
47
⁄64" diameter x
23
⁄64" (L)
Order # Mfr. # Connection (1-3) (4-11) (12-up)
50-8310 IRC-1.0 3.5mm plug $126.10 $120.00 $107.25
50-8311 IRC-1.1 Bare leads 127.00 - -
Ultra Compact Plasma
Block Mini IR Receivers
These units are designed to block plasma,
CFL, EMI, and ESI noise sources, using
SpeakerCraft’s exclusive “smart” circuit
(patent pending). The actual sensor and
electronics are separated into separate “main” and “pick-
up” modules, enabling installation into very tiny spaces
of furniture recesses, monitor panels and under shelves.
The main module houses the status and activity LEDs.
Detachable lead between main and pick-up module totals
6' in length. The main module has attached 5' lead,
terminated with bare wire connections or SpeakerCraft’s
unique four-conductor 3.5mm plug. Overall reception
angle is 100°. Dimensions: •Pick-up module:
7
⁄8" (L) x
13
⁄32"
(W) x
9
⁄32" (D) •Main module: 2
9
⁄16" (L) x
9
⁄16" (W) x
1
⁄2" (D)
Order # Mfr. # Connection (1-3) (4-11) (12-up)
50-8320 IRC-2P2.0 3.5mm plug $115.00 $105.00 $95.00
50-8321 IRC-2P2.1 Bare leads 115.00 105.00 95.00
Shelf Top IR
Receivers
Compact receivers are
housed in an attractive
case to sit on the
surface of a cabinet or
shelf. Clearly visible
system status and IR activity LEDs provide positive
feedback to the user. Models include an 8' attached lead,
terminated with SpeakerCraft’s unique four-conductor
3.5mm plug. Provides a reception angle of 110°.
Dimensions: 1
1
⁄8" (L) x 3
3
⁄16" (W) x 1
1
⁄16" (D)
Order # Mfr. # (1-3) (4-11) (12-up)
50-8325 IRC-3.0 $75.49 $71.25 $63.75
Wall Mount “Junction
Box” IR Receivers
Attractive receivers include clearly
visible system status and IR activity
LEDs, to provide positive feedback to
the user, and mount in standard single
gang junction boxes or low-voltage
brackets. Decora style design is
compatible with standard wall plates, single gang plate
is included. EZ-connector terminal block allows simple
connection of unterminated twisted pair wire. Dimensions:
4" (H) x 1
1
⁄2" (W) x 1" (D)
Order # Mfr. # Color (1-3) (4-11) (12-up)
50-8330 IRC-4.0 White $120.00 $115.00 $102.50
50-8332 IRC-4.0 Almond 120.00 115.00 102.50
Surface Mount
Mini IR Receivers
Compact receivers are
intended for surface
mounting on cabinets,
TV sets or the wall, with attached double sided adhesive.
Clearly visible system status and IR activity LEDs provide
positive feedback to the user. Models are available in
black or white, with 8' attached lead, terminated with bare
wire connections or SpeakerCraft’s unique four-conductor
3.5mm plug. Black version, with stripped leads is also
available with the ALR (ambient light restrictor) lens
for use near plasma displays. Standard receivers provide
a reception angle of 110°, the ALR version is 60°.
Dimensions: 2
9
⁄16" (L) x
17
⁄32" (W) x
9
⁄16" (L)
Order # Mfr. # Color Connection (1-3) (4-11) (12-up)
50-8316 IRC-2.0 Black 3.5mm plug $121.00 $115.25 $103.15
50-8317 IRC-2.1 White Bare leads 121.00 115.25 103.15
50-8318 IRC-2.1 Black Bare leads 127.60 121.35 108.95
50-8319 IRC-2.1 Black Bare leads 127.65 121.35 108.75
ALR
Amplified
Terminator Unit
The AT-1.0 amplified
terminator unit functions
as central control unit for
large multi room IR systems,
allowing connection of the
power supply, IR emitters
and receivers. EZ-connect terminal block allows
connection of multiple daisy chained receivers.
Four-conductor 3.5mm jack accepts connection of one
similarly equipped receiver. This unit has a total of four
outputs that will drive four emitters, or two emitters
and two blasters. The EMX-1.0 expansion terminator
(#50-8350) allows connection of additional emitters.
5~24VDC status input accepts status signal from IR
controlled equipment, and provides visual indication
at each IR receiver.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8335 AT-1.0 $79.99 $75.95 $67.95
Passive Terminator
The PT-1.0 passive terminator
functions as central control unit
for compact, single room IR
systems, allowing connection of the power supply, up to
two IR emitters and a single IR receiver, equipped with
a four-conductor 3.5mm plug. 5~24VDC status input
accepts status signal from IR controlled equipment,
and provides visual indication at the IR receiver.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8340 PT-1.0 $11.49 $10.65 $9.65
Break Out Terminator
The BOT-1.0 breakout terminator
provides bare wire connection to
SmartPath IR receivers that are
equipped with SpeakerCraft’s
standard four-conductor
3.5mm plug. This allows plug terminated receivers to
be connected to the EZ-connect terminal blocks, as
well as other brand three and four wire systems.
Order # Mfr. # (1-3) (4-11)
50-8345 BOT-1.0 $9.29 $8.82
Emitter Expansion
Terminator
The EMX-1.0 expansion
terminator expands the
number of outputs of
the AT-1.0 amplified
terminator unit. This
passive device simply plugs into the emitter output of
the AT-1.0, and provides up to ten emitter outputs. A
feed through output is also provided, allowing multiple
EMX-1.0s to be cascaded. Includes 12" cable for
connection to the AT-1.0.
Order # Mfr. # (1-3) (4-11)
50-8350 EMX-1.0 $21.99 $19.99
Emitter Cover
Prevents IR signals
from interfering with
other components. Fits over
SmartPath IR emitters or components IR sensor window.
Units measure 1" x 2" and may be trimmed to fit.
Order # Mfr. # (1-3) (4-11) (12-up)
50-8371 IR SHIELD $2.00 $1.90 $1.70
Octagonal Light Collector Lens
IR lens is designed to attach to equipment
or remote mounted IR receivers to improve
reliability of IR reception. Multi-array
mirror system provides 90° reflection angle, insuring
equipment will “see” the IR emitter. Sold in packages
of ten.
Order # Mfr. # (1-3 pkgs.) (4-11 pkgs.) (12 pkgs.-up)
50-8370 ILC-1.0 $18.49 $17.10 $15.30