User’s Manual Portable MP3/WMA Player User's Manual 1 Index
User’s Manual Portable MP3 PLAYER User’s Manual Introduction ………………………………………………………………………. 3 Installing the MP3 PLAYER ………………………………………………………………………. 4 Transfer data to and from the MP3 PLAYER ………………………………………………………………………. 5 Listening to your WMA/MP3 music ………………………………………………………………………. 6 MP3 PLAYER Controls ………………………………………………………………………. 7 LCD Display ………………………………………………………………………. 8 Voice Recorder ………………………………………………………………………. 9 Advanced Settings ……………………………………………………………………….
User’s Manual Introducing the MP3 PLAYER. The MP3 PLAYER incorporates a portable WMA/MP3 Player, Voice Recorder and USB Mass Storage Device. MP3 PLAYER Features: WMA/MP3 player WMA DRM Support Voice recorder USB mass storage device. Integrated USB connector. Superb audio quality. No cable required. Requires 1 AAA / LR03 battery (supplied). Systems support: Supports Windows Me/2000/XP with no additional software to install.
User’s Manual Installing the MP3 PLAYER The MP3 PLAYER does not require installation for computers using Windows Me/2000/XP. However, Windows 98 users will need to install the MP3 PLAYER on their system. Make sure that you first start the software setup on the provided CD before you connect your MP3 player with the USB port! Connection before setting up the device driver will invoke ‘Add New Hardware Wizard’ of Windows 98/98SE.
User’s Manual Transfer data to and from the MP3 PLAYER. 1. Make sure that the MP3 PLAYER is turned off. 2. Remove the USB port cover. 3. Plug the MP3 PLAYER into the USB port of your computer. The built-in LCD displays "READY", indicating that the MP3 PLAYER is in USB mode. The MP3 PLAYER is then automatically recognized (in 'My Computer') as a removable media device. (NOTE: DISCONNECT THE EARPHONES FROM THE PLAYER BEFORE CONNECTING USB) 4.
User’s Manual Listen to WMA/MP3 music files with the MP3 PLAYER. 1. Follow the instructions for the transfer of data to and from the MP3 PLAYER to copy WMA/MP3 music files to the MP3 PLAYER. 2. Install 1 AAA/LR03 battery into the battery compartment. 3. Connect the supplied headphones to the headphone socket. 4. Press the Play button. 5. Use the MP3 PLAYER to adjust playback and volume level to listen to your WMA/MP3 music.
User’s Manual MP3 PLAYER Controls 1 Power On/Play/Pause 2 Power Off/Stop 3 LCD Display 4 Skip Next 5 Skip Previous 6 A-B/Menu Button 7 Earphone Socket 8 Microphone 9 Volume Up 10 Volume Down 11 Hold Switch 12 USB Port Cover 7 Index
User’s Manual LCD-Display a Track Number / Total Tracks b Repeat all c Shuffle d Hold e Play/Pause/Stop/Rec. a f Music Type i g File name display.
User’s Manual Voice Record Record voice 1. Select Record in the LCD menu list to begin recording. 2. Press the Stop or Menu button to stop the recording and enter Voice mode. The voice recording will have been saved as a file named Vxxx.WAV in the Voice folder. Note that the LCD display will read MEMORY FULL when all available memory has been used. Playback Voice This operation is similar to the playback of music. 1. Select Voice in the LCD menu to enter Voice mode. 2.
User’s Manual Hold Function Use the Hold function to deactivate the MP3 PLAYER controls (to avoid accidental activation). 1. To activate the Hold function, slide the Hold switch. 2. Slide the Hold switch back to turn off the Hold function. Advanced Settings To navigate the settings menu. 1. Press and hold the Menu button to enter the settings menu. Set t i ngs 2. Press the Skip button to choose a setting. Erase Fi l es 3. Press the Menu button to select that setting.
User’s Manual Equalizer Setting The Equalizer (Eq) setting is to adjust the music playback effect. There are six Eq presets available: Normal, X-Bass, Rock, Jazz, Classical and Pop. Eq Pl ayMode 1. Select Equaliser in the settings menu. 2. Press the Skip button to select a preset Eq. 3. Press the Menu button to activate and exit the menu. Normal XBass Playmode Setting The available Play modes are: Normal Repeat Track Repeat All Shuffle Shuffle Repeat 1. In the settings menu, select Play Mode. 2.
User’s Manual Adjust LCD Contrast To adjust the LCD contrast Contrast 1. In the settings menu, select Contrast. LEVEL 60% 2. Press the Skip button to adjust the contrast level. Backlight Cont rast To adjust the backlight Backl i ght 1. In the settings menu, select Back Light. 2. Press the Skip buttons to adjust the delay before the backlight is switched off. Note: Selecting "Disable" would turn off the backlight. Selecting "On" would always turn on the backlight. 5 sec. 10 sec.
User’s Manual Record Setting A high record sampling frequency brings an increase in sound quality but also a corresponding increase in memory usage. 1. In the settings menu, select Record settings. 2. Press the Menu button repeatedly to cycle through the available Recording Sampling Frequencies: 8000Hz, 11025Hz, 16000Hz, 22050Hz and 32000Hz . Erase Files Warning: Erased files cannot be recovered. 1. Stop playback or recording before attempting to erase files. 2.
User’s Manual Delete ? Yes No Back In My Life: About Information is available regarding the firmware version, built-in memory size and free memory size. 1. Select About in menu list. Version: 1.108 Int Media: 120MB 2. Press any key to exit to menu list screen.
User’s Manual The Menu Normal XBass Rock Jazz Classical Remark Go to Play Music Go to Record Voice memo.
User’s Manual Power Savings Record Settings Erase Files About Exit Load default Exit Music Voice Exit 15 sec The backlight time On The backlight is on. Disable 1 min No power saving function.
User’s Manual Player Format 1. Connect the MP3 player to the computer. 2. You can format your player such as format the Removable disk with format tool of Windows. Select FAT 3. Do not remove the player while it is being formatted. 4. After the player has been formatted, click on the Close button to exit.
User’s Manual Firmware Upgrade Note for Windows Me/2000/XP users: Please note that the MP3 PLAYER software drivers must be installed before using these features. (Windows 2000 should upgrade to SP3 before the driver installation can be completed) The firmware in the player will be able to update through the Player Update utility running on your PC. To update the firmware, run the Firmware Download utility.. 1. 2. 3. 4. 5. Press-and-hold the "Play" button.
User’s Manual Technical Specifications • • • • • • • Size (W x H x D) (Approximation) o About 29 x 91 x 17mm Memory o Built-in Memory : 128MB / 256MB o No Memory Expansion Slot Interface o Full Speed: USB 2.
