User's Manual

Page 9 Connect And Charge The Battery
English
Connect and Charge the Battery Â
Upon initial use, the player should be charged fully
to ensure optimal performance and battery life. If
the player has not been used for a long period of
time, the battery may need to be recharged.
With the included USB cable:
Connect the small end of the cable to the USB 1.
port of the player.
Connect the large end of the cable to an avail-2.
able USB 2.0 Hi-speed port on your computer.
When the player is connected and charging, the no-
tice “USB Connected” will be displayed on the screen.
Tip
You can press <M> after the player is connected to
cancel the data connection and switch to USB power
mode. This will allow you to use the player normally
while drawing power from the computer.
The computer must be powered on and not
in sleep mode in order to charge the battery.
The player will not charge if it is connected
to a low-power USB port.
If the player is connected to the computer
through a USB hub, the hub must be self-
powered to charge the battery.
The battery used in this device may present
a re or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject to
direct sunlight, or in a car with its windows
closed. Do not connect the player to a power
source other than that which is indicated
here or on the label as this may result in the
risk of re or electric shock.