Precautions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
Precautions WARNING: To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet. Note: If the product suddenly has no response or powers off, an electrostatic discharge may be the cause. In this circumstance, please follow the procedures below for recovery: • Unplug the unit. Wait 30 seconds. • After 30 seconds, plug the unit in and turn it on again.
Important Safety Instructions Warnings and precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Important Safety Instructions Read Instructions: All the safety and operating instructions should be read before the product is operated.
Important Safety Instructions Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: •• •• An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
Table of Contents Table Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 Package Contents-----------------------------------------------------------------------------------------------------------------2 Unit View---------------------------------------------------------------------------------------------------------------------3 Remote Control ---------------------
Main Features This product incorporates the LCD display and the TV receiver in one system. Multiple Mode TV AV S-VIDEO COMPONENT DVD VGA HDMI High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Built-in Dolby Digital decoder to output high quality sound effects.
Package Contents Please make sure the following items are included with your LCD TV/monitor. If any item is missing, contact your dealer. a. b. c.
Unit View 1 9 10 11 12 13 14 4 5 6 7 8 3 2 1. TFT SCREEN Present high resolution pictures 2. POWER INDICATOR The indicator lights bright blue when the TV is on, it will dim when the TV is turned off (standby mode). 9 3. REMOTE SENSOR Sense the remote control signal. 4. VOL+/Adjust sound output level. 5. CH+/Press to skip channels. 6. MENU 10 Display the system setup menu. 7. SOURCE Press this button to switch modes. 8. POWER 11 Press to turn on/off the player. 9. Disc Slot 10. Card Slot 11. USB Port 12.
Remote Control Remote Control Drawing 1 21 1. POWER Turn the unit on or off (standby). 2. Numeric Keypad 2 Input numberic data. Access the TV channel directly. 22 3 3. Sub-channel Selector <-> 4 This button is usually used with the numeric keypad 23 5 24 to tune to a channel substation (e.g., 4-1, 4-2). 25 6 26 e.g. To tune to channel 13-2, press these keys in 7 27 sequence: <1>, <3>, <–>, <2>. 8 28 4. Skip Backward Repeatedly press this button to skip backward through DVD 9 29 playback. 30 10 31 5.
Remote Control 20. ANGEL Some discs are recorded with Multi-angle, press this button to chose the desired viewing angle. 21. OPEN/CLOSE In the DVD mode, press this button to take in/out disc automatically. 22. RETURN Reveal the previously viewed channel. 23. Skip Forward Repeatedly press this button to skip forward through DVD playback. 24. SLOW Press this button to have current playback advanced in a slow motion, repeatedly press this button to change advance speed.
Remote Control Remote Control Preparation •• Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace the cover. •• Batteries in the remote will last for approximately 6 months under the normal use. Replace the batteries if the remote control does not work. Do not mix old with new batteries, or different types of batteries.
Cable Connections Antenna/Power Connection 111 Connect TV RF sources to the Coaxial TV Antenna In jack. TV RF signals include: receiving antenna/ CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna. 222 Insert one end of the supplied power cord to the player’s power jack and the other end to a 110-240V AC wall outlet. Note: Antenna requirements for good digital TV reception are more important than those for analog NTSC TV reception.
Cable Connections Coaxial Output - Digital Audio Output Connector If you are using the built-in TV tuner, you may want to play the TV audio through your stereo system for better sound quality. Select TV from the Input source menu to use this connection to watch TV with digital audio sound. (If this connection is inactive, sound will be output from the built-in speakers of the TV.) A coaxial digital audio cable is required for this connection.
Cable Connections HDMI Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection.This cable has a male HDMI Type-A connector on each end, carrying both digital video and audio. These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080-progressive).
Cable Connections S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) 111 Connect the S-Video port by the S-Video cable to input the video signal. S-Video cable is not included with this product 222 Connect the L, R port by the white/red plug of the supplied AV cable to input the audio signal.
TV Function Preparations 111 222 333 444 Connect cables.(Refer to the “Cable Connections” section for details). Press the POWER button to turn on the player. Select the TV signal mode, using the SOURCE button. Press the CH+/- buttons to skip channels. Or you can press the number buttons to input channels directly. For an initial use, you need to scan channels under the Channesl Menu.
TV Function Audio Menu ITEM DESCRIPTION Mode Treble/Bass/Balance Digital Audio/SPDIF MTS/SAP Audio Language Reset Audio Settings Set the audio mode as Custom/Standard/Theater/ Music/News. Press the left/right direction button to adjust settings.
TV Function Settings Menu ITEM DESCRIPTION Parental Controls You are required to enter the 4-digit password to access this Button Lock - This option would enable users to lock buttons on the unit panel. Block Unrated TV -The option would enable users to lock unrated TV program. USA Parental Locks - Setup the US parental control.
TV Function Settings Menu ITEM DESCRIPTION Time This option would enable users to adjust Date/Time information as well as to setup the sleep timer. Date/Time - Enter this option, set "Mode" as "Auto" / "Custom". When Mode is set as "Auto", system would adjust date/time information automatically after you select a desired Time Zone.
AV Function The player’s AV input function would enable user to view programs from external signal sources. When input AV signals, read the user's manual of the external device as well. 111 Connect the external AV signal source. Refer to the “Cable Connection” section for details 222 Use the SOURCE button to select the relevant AV mode (AV, S-Video, Component, HDMI). System Setup Menu Various features can be preset through the setup menu, please read this section carefully.
PC Function You can use the unit’s TFT LCD as your computer’s monitor. 111 Shut down the unit and the computer, connect the VGA jack and PC Audio In jack. See the “Cable Connection” section. 222 Turn on units and use the SOURCE button to select VGA System Setup Menu Various features can be preset through the setup menu, please read this section carefully. •• Press MENU to display the system menu window.
DVD Operation Preparation After all necessary connections have been made, press POWER to turn on the player and then press the MODE button to select DVD. The following discs can be read by the player : DVD /CD / MP3 /JPEG. Disc Loading 1. Put the disc slightly into the disc tray. 2. The disc will be taken automatically into the tray. 1 4 5 6 7 8 3 2 Warning: Do not play poor quality discs that may damage the player's lens. DVD Playback MENU Normally a DVD disc consists of several titles and chapters.
DVD Operation CD Playback The player will play all tracks on a CD disc by default. MP3 Playback 1. Load a disc into the disc tray. 2. It will start playback automatically. Or press direction buttons to select a file from the menu and press OK or PLAY/PAUSE button to start playback. Press left/right button to enter /exit file folders. 3. Press the STOP button to stop playback. JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution.
Playback Function Start Playing Press PLAY/PAUSE to start playback Pause Playing Press PLAY/PAUSE once to hold playback, press it again to resume. Stop Playing Press STOP once to stop playback at a time point. (Pre-stop mode) It will resume from where it was stopped, when you press PLAY button. Press STOP twice to stop playback completely. Repeat Function Use the REPEAT button to perform the repeat function.
Playback Function Slow Playback Slow Motion Press the SLOW button on the remote to have current playback advanced in a slow motion, repeatedly press this button to change speed as below. Step by Step Press Play/Pause to pause current playback, and then repeatedly press SLOW to have playback moved step by step forward. To resume normal playback, press Play/Pause. Zoom Function Repeatedly press the ZOOM button to achieve the following zoom effect. NOTE: There is no zoom function for MP3 or CD discs.
DVD Setup Various features can be preset through the DVD setup menu. Press the DVD SETUP button to show the DVD menu. While working with the setup menu: 111 Press the direction buttons to select the desired item. 222 Press the right direction button or the OK button to confirm settings. 333 To exit, press DVD SETUP again. System Setup 111 Power Resume - Set the power resume function On.Off. The default setting is Off. 222 Screen Saver - Set the Screen Saver ON/OFF. The default setting is On.
DVD Setup Language Setup Item Instruction Default OSD Language Setup the OSD language. English Audio Lang Setup the audio language. English Subtitle Lang Setup the subtitle language. When OFF is selected, the subtitle will not be displayed. English Menu Lang Setup the menu language.
Trouble Shooting If you have a problem with this device, please read the troubleshooting guide section and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Symptom Check and Action No Power •• •• •• Make sure the unit has been powered on manually. Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on.
Specification TFDVD 2425 TFT Panel Characteristic TV Charactoristic Active Area 23.6" Resolution 1920x1080 Display Color 16.7M Pixel Pitch 0.2715(H) x 0.2715(V) TV System ATSC/NTSC Antenna Impedance 75Ω Standby Power Consumption <1W Power Consumption AC100-240V 50/60Hz Standard On Working 55W(Max) Speaker 2x(4Ω,5W) Operating Temperature Range 0ºc-40ºc Wall Mounting VESA M 4 Active Area 18.5" Resolution 1366X768 Display Color 6 bit -16.7 M Pixel Pitch 0.3(H) x 0.
Specification TFDVD2295(S2) TFT Panel Characteristic TV Charactoristic Active Area 21.6" Resolution 1366X768 Display Color 8 bit - 16.7M Pixel Pitch 0.345(H) x 0.345(V) TV System ATSC/NTSC Antenna Impedance 75Ω Standby Power Consumption <1W Power Consumption 100-240V 50/60Hz Standard On Working 50W(Max) Speaker 2x(4Ω,5W) Operating Temperature Range 0ºc-40ºc Wall Mounting VESA M 4 Active Area 15.6" Resolution 1366X768 Display Color 6-bit, 262.144 colors Pixel Pitch 0.
TFT LCD Widescreen Television Instruction Manual TFDVD2495/2295(S2)/1995(S2)/1595(S3) Please read this manual carefully before connection and use