Precautions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and servicing instructions in the literature accompanying the appliance.
Precautions WARNING: To prevent fire or shock hazard, do not expose this device to rain or moisture. Dangerous high voltage is present inside the enclosure. Do not open the cabinet. Note: If the product suddenly has no response or powers off, an electrostatic discharge may be the cause. In this circumstance, please follow the procedures below for recovery: • Unplug the unit. Wait 30 seconds. • After 30 seconds, plug the unit in and turn it on again.
Important Safety Instructions Warnings and precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Important Safety Instructions 111 222 333 444 555 Read Instructions: All the safety and operating instructions should be read before the product is operated.
Important Safety Instructions Antenna Safety Instructions If an outdoor antenna is connected, follow the precautions below: •• •• An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
Table of Contents Table Of Contents Precautions Important Safety Instructions Main Feature-----------------------------------------------------------------------------------------------------------------------------1 Package Contents-----------------------------------------------------------------------------------------------------------------2 Unit View---------------------------------------------------------------------------------------------------------------------3 Remote Control ---------------------
Main Features Multiple Mode TV AV1 AV2 S-VIDEO COMPONENT1 COMPONENT2 DVD HDMI1 HDMI2 HDMI3 VGA High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior sound Built-in Dolby Digital decoder to output high quality sound effects. Screen Support the picture size of a normal screen (4:3) and a wide screen (16:9) LCD (Liquid Crystal Display) TFT liquid crystal display technology delivers a high-definition color picture.
Package Contents Please make sure the following items are included with your product. If any item is missing, contact your dealer. a. b. c.
Unit View 1 9 10 4 5 6 7 8 11 12 13 14 3 2 1. TFT SCREEN Present high resolution pictures 2. POWER INDICATOR Lights blue in the standby/power-on mode, 3. REMOTE SENSOR Sense the remote control signal. 4. SOURCE Select a working mode. 15 5. MENU Display the system setup menu. 6. CH+/16 Press to skip channels. 7. VOL+/Adjust sound output level. 8. POWER Press to turn on/off the player. 17 9. Disc Slot 10. Card Slot 11. USB Port 12. STOP - Stop disc playback. 13. PLAY/PAUSE - Start/hold disc playback. 14.
Remote Control Remote Control Drawing 1 21 1. POWER Turn the unit on or off (standby). 2. Numeric Keypad 2 Input numberic data. Access the TV channel directly. 22 3 3. Sub-channel Selector <-> This button is usually used with the numeric keypad 4 23 5 to tune to a channel substation (e.g., 4-1, 4-2). 24 25 6 e.g. To tune to channel 13-2, press these keys in 26 7 27 sequence: <1>, <3>, <–>, <2>. 8 28 4. Skip Backward Repeatedly press this button to skip backward through DVD 9 29 playback. 30 10 31 5.
Remote Control 21. OPEN/CLOSE In the DVD mode, press this button to take in/out disc automatically. 22. RETURN Reveal the previously viewed channel. 23. Skip Forward Repeatedly press this button to skip forward through DVD playback. 24. SLOW Press this button to have current playback advanced in a slow motion, repeatedly press this button to change advance speed. You can press Play/Pause to pause current playback, and then repeatedly press this button to have playback moved step by step forward.
Remote Control Remote Control Preparation •• Remove the battery compartment cover located on the rear of the remote control. Insert 2 x “AAA” batteries, making sure to match their polarities (+/-) to the markings on the inside of the compartment. Replace the cover. •• Batteries in the remote will last for approximately 6 months under the normal use. Replace the batteries if the remote control does not work. Do not mix old with new batteries, or different types of batteries.
Cable Connections Figure. Cable connections Antenna/Power Connection 111 Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You can use 75 Ohm coaxial cable to connect outdoor antenna. 222 Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V AC wall outlet. AC￣100V-240V 50Hz/60Hz Wall Outlet 100~240V IMPORTANT NOTICE 111 Be sure to have all necessary connections properly done before connect the power supply.
Cable Connections Coaxial Output - Digital Audio Output Connector When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player’s digital audio output connector. When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home. A coaxial audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used. The mentioned cable is not included with this product.
Cable Connections HDMI 1/2/3 Input HDMI (High Definition Multimedia Interface) is a new type of connection that transmits digital audio and video signals simultaneously over a single cable. A HDMI cable is required for the HDMI connection. Unit Rear Panel HDMI1,2 Connection AC￣100V-240V 50Hz/60Hz These HDMI input connectors are capable of receiving video at resolutions up to 1080p (1080progressive).
0V-240V /60Hz Cable Connections S-Video Input The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes, DVD players, VCRs, etc.) 50Hz/60Hz 111 Connect the S-Video port by the S-Video cable to input the video signal. S-Video cable is not included with this product AC￣100V-240V 222 Connect the L, R port by the white/red plug of the supplied AV cable to input the audio signal.
TV Function TV Function Preparations 111 Connect cables.(Refer to the “Cable Connections” section for details). 222 Press POWER to turn on the player. 333 Press SOURCE to select the TV signal mode. a. Press the SOURCE button to display the Input Source menu. b. Press the UP or DOWN buttons to browse the mode options. c. Press OK to select a mode option. 444 Press the CH+/- buttons to skip channels. Or you can press the number buttons to input channels directly.
TV Function Menu Description Picture Menu ITEM DESCRIPTION Picture Mode Setup the picture mode. (Custom, Vivid, Standard, Sports, Theater, Energy Saving). Contrast Adjust the display contrast Brightness Adjust the display brightness Color Adjust the display color Tint Adjust the display tint Sharpness Adjust the image sharpness Display Settings Press the right direction button to access the following options.
TV Function Menu Description Option Menu ITEM DESCRIPTION Parental Controls - Press the right direction button to access Enter Password. Input the 4-digit password to display parental control menu. The initial password is 0000. Change Password - To change the password, input the old password - -> input the new password- - >verify again. Please remember the password since the player’s reset function would not revert the password. System Lock - Set the system lock funtion on/off.
TV Function Menu Description Channel Menu ITEM DESCRIPTION Air/Cable Setup the antenna type as Air or Cable. Auto Scan Search channels automatically. Select this option, press the right button to start searching, press MENU to stop. Favorite Make the favorite channels collection. Select this option, press the right direction button to access the Favorite List. In the Favorite List, press the up/down direction button to select the desired channel.
AV Function AV Function The player’s AV input function enables the user to view programs from external input sources. 111 Connect the external AV signal source. Refer to the “Cable Connection” section for details 222 Press the SOURCE button to select the relevant AV mode System Setup Menu Various features can be preset through the system menu. •• Press the MENU button to display the system menu.
PC Function PC Function You can use the unit’s TFT LCD as your computer’s monitor. 111 Shut down both units and connect the VGA jack and PC Audio In jack. See the “Cable Connection” section. 222 Turn on units and press the SOURCE button to select VGA System Setup Menu Various features can be preset through the system menu. •• Press MENU display the system menu. •• Press the left/right direction button to select the desired sub-menu, press OK or the down direction button to enter.
DVD Operation Preparation After all necessary connections have been made, press POWER to turn on the player and then press the MODE button to select DVD. The following discs can be read by the player : DVD /CD / MP3 /JPEG. Disc Loading 1. Put the disc slightly into the disc tray. 2. The disc will be taken automatically into the tray. Warning: Do not play poor quality discs that may damage the player's lens. DVD Playback MENU Normally a DVD disc consists of several titles and chapters.
DVD Operation CD Playback The player will play all tracks on a CD disc by default. MP3 Playback 111 Load a disc into the disc tray. 222 It will start playback automatically. Or press direction buttons to select a file from the menu and press OK or PLAY/PAUSE button to start playback. Press left/right button to enter /exit file folders. 333 Press the STOP button to stop playback.
Playback Function Start Playing Press PLAY/PAUSE to start playback Pause Playing Press PLAY/PAUSE once to hold playback, press it again to resume. Stop Playing Press STOP once to stop playback at a time point. (Pre-stop mode) It will resume from where it was stopped, when you press PLAY button. Press STOP twice to stop playback completely. Repeat Function Use the REPEAT button to perform the repeat function.
Playback Function Slow Playback Slow Motion Press the SLOW button on the remote to have current playback advanced in a slow motion, repeatedly press this button to change speed as below. Step by Step Press Play/Pause to pause current playback, and then repeatedly press SLOW to have playback moved step by step forward. To resume normal playback, press Play/Pause. Zoom Function Repeatedly press the ZOOM button to achieve the following zoom effect. NOTE: There is no zoom function for MP3 or CD discs.
DVD Setup Various features can be preset through the DVD setup menu. Press the DVD SETUP button to show the DVD menu. While working with the setup menu: 111 Press the direction buttons to select the desired item. 222 Press the right direction button or the OK button to confirm settings. 333 To exit, press DVD SETUP again. System Setup 111 TV System - Select the TV System from NTSC/PAL/AUTO. The default setting is NTSC. (The TV System for north America is NTSC.
DVD Setup Language Setup Item Instruction Default OSD Language Setup the OSD language. English Audio Lang Setup the audio language. English Subtitle Lang Setup the subtitle language. When OFF is selected, the subtitle will not be displayed. English Menu Lang Setup the menu language.
Trouble Shooting If you have a problem with this device, please read the troubleshooting guide section and check our website at www.cobyusa.com for Frequently Asked Questions (FAQs) and firmware updates. If these resources do not resolve the problem, please contact Technical Support. Symptom Check and Action No Power •• •• •• Make sure the unit has been powered on manually. Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on.
Specification TFDVD 2695 TFT Panel Characteristic Active Area 26" Resolution 1366X768 Display Color 8 bit -16.7 M Pixel Pitch 0.4215(H) x 0.4215(V) TV System ATSC/NTSC Antenna Impedance 75Ω Power Consumption 100-240V 50/60Hz TV Charactoristic Standard On Working 110W(Max) Speaker 2x(8Ω,10W) Operating Temperature Range 0ºc-40ºc Active Area 32" Resolution 1366X768 Display Color 8-bit - 16.7M Pixel Pitch 0.51075(H) x 0.
TFT LCD Widescreen Television Instruction Manual TFDVD2695/3295 Please read this manual carefully before connection and use
