User Guide

11AQUA+ FOR KANSO® 2 USER GUIDE
Care and storage
1. Rinse Aqua+ with clean water and dry with a soft cloth.
2. Open the Aqua+ cover
and remove your sound
processor.
3. Check that the Aqua+ is thoroughly dry.
4. Put the two halves together and test the seal by pressing
down gently on the cover.
If any air leaks out you should not use it again.
5. If the seal is ok, separate the two halves again and place
your Aqua+ in your storage case or the Kanso 2 Activity
Kit’s waterproof case until you want to use it again.