User's Manual

When Auto Telecoil is enabled, you see the Auto Telecoil icon next to
your current program icon on the Home screen. When your telephone
call starts, the colour of the Auto Telecoil icon changes to black
indicating that you are using the telecoil.
Noise
Music
Focus
Everyday
AUTO
Noise
Music
Focus
Everyday
Figure 26: Auto Telecoil enabled (1) and in use (2)
The telecoil automatically turns off when:
You move the telephone away from your processor (e.g. when the •
telephone call ends).
You exit the roomloop environment.•
It may take up to ten seconds for the telecoil icon to disappear from
the screen.
Switching between using Auto Telecoil and telecoil
You can manually switch between using the Auto Telecoil and the
telecoil.
To switch from Auto Telecoil to telecoil, press the Toggle button on
your remote assistant. The telecoil icon will display on the Home
screen.
To switch from telecoil to Auto Telecoil, press and hold the Toggle
button until the Auto telecoil icon displays on the Home screen.
Pairing your remote assistant with your
processor
Your remote assistant can communicate with your processor only
when it is paired with your processor. You can pair the remote assistant
with up to two processors at the same time.
1
2
© Cochlear Limited 2009 CR110 User Guide - 29
Using your remote assistant
195993 Iss3 CR110 user guide 01.nu.indd 29 13/05/2009 5:12:24 PM