User's Manual

Unpairing your remote assistant from your
processor
When you unpair your remote assistant from your processor, the
remote assistant and processor will no longer communicate with each
other.
You may need to unpair your remote assistant if:
You have accidentally paired your remote assistant with the wrong •
processor.
You no longer want your remote assistant to communicate with •
your processor, or one of your processors.
You have received a new processor, and you need to unpair the •
remote assistant from the old processor.
To unpair your remote assistant from your processor:
From the Home screen, press the Cochlear key until you see the 1.
processor status screen.
Press the upper right soft key to select the remote assistant 2.
settings menu.
Figure 34: Remote assistant settings menu
Select the pair/unpair screen from the remote assistant settings 3.
menu. The pair and unpair screen displays.
To unpair the remote assistant, press the lower left soft key.4.
© Cochlear Limited 2009 CR110 User Guide - 33
Using your remote assistant
195993 Iss3 CR110 user guide 01.nu.indd 33 13/05/2009 5:12:25 PM