User's Guide

When pairing is complete, the 'Processor Paired' screen will appear,

followed by the 'Home' screen

Setting remote assistant beeps

You can adjust the remote assistant beeps from the Settings screen.

Pairing the remote assistant

Pairing allows the remote assistant to communicate with the processor.

Before you start, ensure that both the processor and the remote

assistant are switched on.

If there is no sound processor currently paired with the remote assistant,

the following screen will prompt you to pair a sound processor:

If there is already a sound processor paired, you can re-pair with a

different sound processor at any time using the following instructions.

To pair the remote assitant with a sound processor:

1. Hold the processor coil on

the coil guides at the back of

the remote assistant

3. Press OK

and wait during

initialisation

1. From the 'Home' screen, use the right arrow key to scroll to

the Settings menu

2. Press OK

3. Use up and down arrows to

select 'Soft', 'Loud' or 'Off'

4. Press OK

2. 'Pair processor'

prompt screen

will display

RtRt RtRt

Getting started Getting started