Rev1.
Contents Important safety instructions ……………………………………………………………………………………………………… 7 1. Product overview …………………………………………………………………………………………………………. 9 1-1. Front view ………………………………………………………………………………………………………………. 9 1-2. Rear view ………………………………………………………………………………………………….……………. 9 1-3. View of remote control and key function ……………………………………………………………..10 2. Prepare ……………………………………………………………………………………………………………….…….…… 11 2-1. Check the contents of X30 package …………………………………………………………….……….. 11 2-2.
5-2. CD Ripping ……………………………………………………………………………………………………………. 18 5-2-1. Bit Rate and Quality …………………………………………………………………………………….. 18 5-2-2. Audio Format (Audio Rip Format) ……………………..………………………….…………….. 19 5-2-3. FreeDB TextCode ………………………………………………………………………………………….. 19 5-2-4. FreeDB Install ……………………………………………………………………………………………….. 19 5-2-5. FreeDB Update ……………………………………………………………………………………………... 20 5-3. Audio ………………………………………………………………………………………………………………………20 5-3-1. Player View………………………………………………………………………………..……………………..
5-7-6-2. Used HDD (Partitioned HDD) …………………………………………..……..……….31 5-7-7. NTFS Fix ……..………………………………………………………………………………………….….…31 5-7-8. Brightness ……..………………………………………………………………….….………….….…….. 31 5-7-9. Alarm ………………………………………………………………………………………………………… 32 5-7-10. Auto Shutdown ………………………………………………………………………………………...33 5-7-11. Scroll Speed …………………………………………………………………………………………….. 33 5-8. Time …………………………………………………………….……………………………….…….………………. 37 5-8-1. Time Format ……………….……………………………………………………….……....……………. 34 5-8-2.
10. Audio CD direct play ………………………………………….……………….……………..………….…….…….. 47 10-1. If the X30 is connected to a network (Internet)………………….……………………….….…. 47 10-2. If the X30 is NOT connected to network (Internet) ………………………………....……..… 48 10-3. In case that you have installed the FreeDB data onto the hard disk of the X30 ………………………………………………………………………………….….….…...……. 48 11. Data CD direct play ………………………………………………………………….……………….……….…...…. 49 12. Playlist ………………………………………………………….…………………….………………...……..…..……….. 49 12-1.
16. USB host port for USB devices …………………………………………...………………….………............. 61 17. Browser …………………………………………………………………………………………..……………………….……61 17-1. Play audio file data CD‟s..………………………………………………..…………..……….…………......62 17-2. File Management ……………………………………………………………………………..………………... 62 17-2-1. Accessing information on the HDD, USB, folder or file ………….………………. 62 17-2-2. TAG Edit …………………………………………………………………………………………………… 63 17-2-3. Import to DB ………………………………………………………………………….…..…………… 63 17-2-4.
Important safety instructions For your own safety, please read the following important safety instructions carefully before attempting to connect this unit to the main power supply. They will enable you to get the best performance from the unit. 1.Read the instructions. 2.Keep the instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this product near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufacturer‟s instructions.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1. Product overview 1-1. Front View ① Mute/Volume Knob ⑨ CD Eject button ※ NOTE ② Power/Standby button ⑩ LCD screen 1) Press INPUT button and ③ Power/Standby Indicator ⑪ OK/PAUSE/SCROLL knob RETURN button simultaneously, ④ Headphone ⑫ INPUT button you may go to Playing Screen. ⑤ USB Host port ⑬ RETURN button 2) On Playing Screen, turning ⑥ AUX In ⑭ STOP button OK/PAUSE/SCROLL works just like ⑦ Remote control receiver ⑮ NENU button PREVIOU/NETX keys of remote.
1-3. View of Remote Controller and each key’s function 1. POWER : Power ON/OFF 2. RADIO : Go to FM radio screen 3. I-SERVICE : Go to i-Service screen 4. HOME : Go to home screen 5. SEARCH : To pop up search menu 6. Alphanumeric : Enter number & alphabet/ Seek at Playing Screen mode 7. : To delete typed alphabet 8. NOW PLAYING : Go to Playing Screen 9. REC : To record 10. MENU : Popup menu screen 11. STOP : Stop playing 12. ARROW : Move cursor to upper side 13.
2. Prepare 2-1. Check the contents of X30 package ① X30 unit, ④ Manual ② Remote controller + AAA ⑤ FreeDB data CD batteries x 2EA ③ Power cord ⑥ FM Radio Antenna ⑦ Screw to install storage 2-2. Install AAA batteries into the remote control. Open the battery door and insert the batteries. 2-3. Optional items, WiFi USB dongle If you purchased optional items, the WiFi USB dongle, it looks like below. 801.
2-4. Purchased X30 without storage. You need a 3.5” or 2.5” SATA hard disk or SSD, and install it into the X30 like below picture and format it. For formatting of the installed storage into X30, please refer to the 5-7-6. HDD format. 2-4-1. HDD installation 【 TIP 1 】 X30 supports 3.5” or 2.5” SATA hard disk and solid state drive (SSD) 2-4-2. HDD Format ※ Refer to the 5-7-6. HDD Format 2-5. Purchased X30 with an internal storage installed. Check whether the storage is formatted, or not.
4. Turn On and Start 4-1. Wizard Setup (Setup Assistant) Without HDD installed; if you are installing the HDD you will meet the Setup Assistant (Wizard Setup) as shown below. Switch the unit on at the rear of X30 and then power it on with the remote controller or the power button on the front of the X30. Select OK and confirm with the OK key to start Wizard Setup. If you want to run the set up after booting up, you can select CANCEL at the 1st step.
5. SETUP Go into SETUP menu with remote controller. You can select each item with the arrow key and confirm it with the OK button. 5-1. Music DB Select the Display Mode and confirm with the OK button. 5-1-1. Display Mode You may set one of six(6) options, see below. For example, if you set Title, the Music DB will display the title(song) list when you go into the Music DB.
5-1-3. Storage for Music DB You can select either the internal HDD (SSD) or USB for Music DB storage. ( ※ Default is Internal HDD(SSD)) [CAUTION] ※ NOTE: Please remember to check this setting first when you see „Query Error‟ on the screen in trying access to your music DB. For example, you will see „Query Error‟ on the screen when you try accessing your Music DB of internal (installed) HDD with Music DB storage set to USB.
5-1-4-2. Music DB Recovery run After you run the Music DB Recovery, as shown above, you can see the results of the Recovery as displayed below. Go to Music DB of SETUP and select Recovery Result. The left screen will appear if your Music DB is OK The left screen will appear if something was dubious ※ „Moved‟ means the song file moved to „Recovery‟ folder. ※ „song file‟ is actual file. ※ „Deleted‟ means the info in the Music DB was deleted. ※ „Album‟, „genre‟, „artist‟ and „song‟ are just info(text file).
5-1-4-5. To clear the list on Recovery Result You can clear the list on the Recovery Result as follows: ① Place the cursor on the screen of the Recovery Result. ② Select the list you want to clear with the RIGHT key ③ Press the MENU key ④ You can clear all or selected list only. 5-1-5. Backup You can backup your Music DB to an external USB hard disk. ※You need an external USB hard disk drive which has a bigger capacity than the Music DB. ① Connect the external USB HDD to the USB host port of the X10.
5-1-6. Restore You can restore the backup data in the Music DB of the X30. ① Connect the backup device to the USB host port of the X30. ② Go to the Music DB of SETUP and select Restore, and confirm it with the OK button. ③ You can see the backup device and select it, confirm using the OK key to start Restore. 5-2. CD Ripping Select CD Ripping and confirm it with the OK button. The below items will be displayed. 5-2-1.
【 TIP ② 】 Estimated Storage capacity CD Ripping option 500GB HDD 1 TB HDD 2 TB HDD 4 TB HDD WAV(uncompressed) 650 CDs 1,300 CDs 2,600 CDs 5,200 CDs 128K 7,500 CDs 15,000 CDs 30,000 CDs 60,000 CDs MP3 / 192K 5,000 CDs 10,000 CDs 20,000 CDs 40,000 CDs OGG 320K 3,000 CDs 6,000 CDs 12,000 CDs 24,000 CDs Compressed Rate These figures may vary slightly according to the number of tracks on a CD 5-2-2.
5-2-5. FreeDB Update You can get a FreeDB update from the Cocktail Audio website (www.cocktailaudio.com). To update your copy the FreeDB load the file downloaded from www.cocktailaudio.com to a memory stick and insert the memory stick into the USB host port of the X30. Navigate to SETUP and select FreeDB Update. Press the OK button. You can see the USB memory and select it with the OK button to find the FreeDB update file. Confirm with the OK button to begin the installation. 5-3.
② Select one of 18 options ※ NOTE: Equalizer works in Speaker Out (inside amplifier) only. ※ NOTE: During playing, you can also change preset E.Q using Preset E.Q button. For custom equalizer setting, press E.Q button of remote control. [ Preset E.Q. ] [ Custom E.Q ] [ Preset E.Q + Custom E.Q ] ※ NOTE: For more detailed explanation, refer to the 19-7. Preset E.Q. and 19-8. Custom E.Q. 5-3-3.
5-3-6. DRC (Dynamic Range Compression)Mode ※ NOTE: DRC Mode works in Speaker Out mode only. ※ Default : ON 5-3-7. Recording Sample Rate When you record by X30, you can set Recording Sample Rate by one (1) of three (3) options like 48Khz, 96Khz, 192Khz. ※ NOTE: The higher sample rate, the more recoding space is needed. ※ Default : 96Khz 5-3-8. Gapless Play The X30 supports gapless playback function for MP3 file, WAV and FLAC file only.
5-3-10. Slide Show Time You can set show time and effect time according to your taste. ※ Show time : The time required to show one photo ※ Effect time : The time required to transit one photo to other photo ※NOTE: For detailed explanation, refer to 19-3. Photo Slide Show. 5-4. Network ※ Make sure your Ethernet cable or a USB WiFi dongle is connected. Select Network and press the OK button. ① Select Network and confirm with the OK button.
5-4-1-2. Static IP ① Select Static IP and confirm with the OK button. ② Enter the values such as; IP Address, Subnet mask, etc. ③ Select OK and confirm with the OK button ④ The screen to the left will be shown if the network is connected successfully. 5-4-2. Wireless Setup. ① Select Wireless Setup and confirm with the OK button. The available AP will be displayed as shown below. ② Select proper AP and confirm with the OK button.
5-5. Network Service Select Network Service and confirm with the OK key. There are several items like Samba Server, Web Server, UPnP Server and FTP Server. 5-5-1 Samba Server If you would like to see the folders on the X30 hard disk through your network connected PC you can set up the following: ① Select Samba Server and confirm with the OK key. Set Samba Server as ON, see below ※ default : OFF ② Select Samba Server and confirm with the OK button. ③ Select Host Name and Workgroup.
5-5-2-1. How to enable Web Server Select Web Server and confirm with the OK key. Set to ON as shown below Select Reinstall and confirm with the OK key to run it as shown below. 5-5-2-2. How to start WebInterface The X30 WebInterface is available in two formats; one for PC(tablet PC also), the other is for smart phones. ① You can get the IP address of your X30 from SETUP. ② Type in the IP address (for example, 192.168.0.4) into the address window in the web browser of the PC or Smart phone, see below.
Main screen ※ Refer to the X30WebInterface User Guide to learn how to use the WebInterface, Place the mouse cursor on the cocktailAudio The popup menu will show up like below You can select one of nine(9) items according to your purpose. For example, if you select ‘Album’, you can list all albums in the Music DB. You can play by album and add album art, edit, delete and assign albums to a playlist.
5-5-3 UPnP Server If you have a device (like a PC) which supports UPnP client protocol, you can play music stored in the X30 Music DB through the UPnP device. Default setting for UPnP Server is ON, see below. 5-5-4 FTP Server Select FTP Server and confirm with the OK key. Set it to ON. You will need to enter the User Name. Default password is 0000. You may change password should you wish to. 【 TIP 】 You may use the FTP program like „File Zilla‟. The character should be set as „UTF-8‟. 5-6.
5-7. System ① Select System and confirm with the OK button. 5-7-1. OSD Language. ② Select OSD Language and confirm with the OK button. Supported languages will be displayed. ③ Select your preferred language and confirm with the OK button. 5-7-2. Auto Play 【 TIP ③ 】 Default is English. Select Auto Play and confirm with the OK button. You can set it to ON or OFF. ※ Default : OFF 【 TIP 】 For detailed explanation of Auto Play function, refer to 19-15. Auto Play. 5-7-3.
5-7-4. Factory Reset To restore changed values of setup, select Factory Reset and confirm with the OK button. 5-7-5. HDD Sleep You can make X30 HDD go to sleep mode by this setting. There are five (5) options like OFF, 10 Min, 20 Min, 30 Min and 1 Hour. During the selected time, if no access to HDD, the HDD goes into sleep mode. ※ For the X30 to wake up from HDD sleep mode, it takes 3~4 seconds. During this time, the X30‟s response to the input signal from remote control will be delayed. 5-7-6.
5-7-6-2.Used HDD (partitioned HDD) [Warning] HDD format will clear all data in the HDD! ① Go to HDD Format of SETUP, and confirm with the OK button. ② It will show total size and current file system ③ Select Linux or NTFS ④ It will start formatting and reboot automatically. 5-7-7. NTFS Fix You can check and fix the NTFS file system of the X30 HDD as follows. Select NTFS Fix and confirm with the OK key.
5-7-9. Alarm You can set six (6) alarm settings on the X30. ① Go to Alarm at SETUP, and confirm it with OK key. The following screen will appear. ② Select the line you require and press the OK button. The following screen will appear. ※ NOTE: The time should be set minimum 10 minutes later than current time. ③ Set time, cycle and sound source. ④ Set Snooze ON. ⑤ Select OK and confirm it with OK button. ① Selecting time with up/down button.
5-7-10. Auto Shutdown The X30 will be powered off automatically at the assigned time and date. ① Go to SETUP and select System. ② Select Auto Shutdown and confirm with the OK key ③ Select from the list and confirm. ④ You can set the time on the X10 ⑤ Once the time is set move cursor onto the OK icon and confirm with the OK key. ※ NOTE : Use the arrow key (UP/Down) to change the values. Use the arrow key (left/right) to move the cursor. Press the OK key to change „Repeat‟.
5-7-12. List Line Count The number of text lines displayed on the screen is selectable according to your taste like below. ※ NOTE Default for internal LCD: 7 lines Default for external screen: 11 lines 5-8. Time You can set time format and time via internet or by manual here. 5-8-1. Time Format X30 displays the time while playing the internet radio. Pressing the CLOCK key displays time. X30 can display one of two ways, AM/PM or 24Hours. You can select which here. 5-8-2.
5-8-3. Time Set (Manual) Without a network (internet) connection, you can set time manually. ① Select Time Set (Manual) as in the above picture and confirm it with the OK button. ② Input your time manually and select OK to confirm it with OK button. 5-9. Firmware You can check the current firmware version of your X30 and install the updated new firmware. Select Firmware and confirm with the OK key. 5-9-1. Current firmware You can check the current firmware version as shown below.
5-9-3. Update by auto (Automatic Firmware Update by network) The X30 will automatically update the firmware through the network. If you don‟t wish this done automatically you can change the setting to OFF, see left. ※ Default : ON 5-9-4. What’s Automatic Firmware Update by network? This function is available only when X30 is connected to a network (internet). In the instance that a higher version of the firmware exists at our server system, your X30 will check it automatically when the X30 boots up.
FreeDB database on the internet. A USB keyboard or the supplied remote control can be used to edit the tag information of the CD (which you may find incorrect or incomplete) that will eventually be stored on the X30 Music DB. 6-2. What is FreeDB ? FreeDB is a database used to look up CD information using the network (internet). This is done by the X30 (using a FreeDB aware application) that calculates a (nearly) unique disc ID for a CD inserted into your optical drive.
7-1-1. Ripping All This procedure is for loading (ripping) a whole CD. ④ Select Ripping All and press OK button. Then the below screen is displayed. ⑤ Select one of four(4) options(WAV, MP3, OGG, FLAC) and press OK button. Then, the below screen is displayed. The X30 retrieves each information (title, artist, etc) from the FreeDB CD database. ⑥ Move the cursor onto the CD icon like below. ⑦ Press the CD icon with OK key and you will see the picture below.
⑪ The selected art will be downloaded. ⑫ You will be prompted OK/Other/Cancel. ⑬ Select OK to confirm. The confirmed art will be placed onto the CD icon. ⑭ Now, everything is ready to start the CD ripping. Select OK to confirm the start of CD ripping. ⑮ Now the CD will be ripped to the MusicDB When the Ripping has finished: Press OK key to eject the CD. 7-1-2. Ripping Tracks This procedure is for loading (ripping) individual tracks. ① Select Ripping Tracks and confirm with the OK button.
【 TIP ③ 】 When a CD is inserted into the optical drive, the X30 loads (rips) the CD to a WAV format first, even if the MP3 option was chosen. The X30 then converts the WAV file into MP3 format afterwards in the background. The X30 continues to do convert the files if it is turned on. The X30 will pause the conversion process during ripping. 【 TIP ④ 】 Explanation of each item on the ripping screen. ① Title of track being ripped ② Number of tracks to be ripped/ total no of tracks in CD.
⑤ Select one of the 4 file type options and confirm by pressing the OK button. The below screen will be shown. ⑥ Enter the info with remote controller or USB keyboard. You must enter Album name to go to next step. 【 TIP ⑥ 】 To use USB keyboard, ensure to connect a USB keyboard into the X30 before you boot the unit. ⑦ Select OK to confirm the entry. Then, loading (ripping) will start as in the picture below. Now loading (ripping). ⑧ Loading (ripping) has finished. Select OK and confirm by pressing OK.
7-4. To check the status of CD ripping and converting. You can check the status of CD ripping and converting by this function. ① Place the cursor on the album you want to check. ② Press INFO key ③ The status information will show up like left. ※ NOTE: If you wish to check the information and the status of the conversion process for the whole of the Music DB of the X30, go to the home screen. Place the cursor on the Music DB icon and Press the INFO key. 8. How to use the Music DB(database) 8-1.
② Select the album you wish and confirm with the OK button. All the music in the album is displayed, see below. ③ Select from the music list and confirm with the OK button to start playing the music.
【 TIP ④ 】 Playing screen ------- press INFO button ------- Detailed info of current music ①Title of current music ①Title of current music.
【 TIP ⑤ 】 You can run the SEARCH function by artist from the artist list screen, by genre on the genre list screen or by title on the title list screen, see below. 8-3. How to manage Music DB The X30 allows you to manage the Music DB. You can delete or rename albums, artists and genre. You can import music from other storage devices (USB memory sticks or other hard disks) to Music DB folder. 8-3-1. Deleting or renaming music in the Music DB. ① Open the album list, artist list or genre list.
8-3-2. How to export music from the Music DB to other storage devices (HDD or USB). You can export music from the Music DB to other storage devices such as; an external HDD or USB by following the steps below: ① Go into the Music DB using the remote control. You can see the Album list. Select the folder(Album) or the music you wish to export. ② Press the MENU key and select Export Songs, see screen shots shown on the left ③ Confirm with the OK key, to display the next screen, shown below.
8-3-3. History function You can list a maximum of 10 recently played songs from the Music DB using this function. ① Go into the Music DB ② Press the MENU key ③ Select „History‟ and confirm with the OK key, as shown in the screen shot on the left. 9. Editing the TAG information of the music in the Music DB You can edit the TAG information of music such as the title, artist, album, year or genre by following the steps below: ① Place the cursor on the music you wish to edit.
Now playing !!!!!!! 【 TIP ③ 】 If you press the INFO button on the above Playing Screen, you can see detailed information for the music currently playing, see screen shot below. 10-2. If the X30 is NOT connected to a network (internet) ① Insert a CD and select CD Play/Rip icon and confirm with the OK button. The track list is displayed as shown below ② Select the track you wish to play and confirm with the OK button. The track will then start playing Now playing !!!!!!!!! 10-3.
11. Data CD direct play The X30 will support music files burned to CD R/RW or DVD R/RW discs ① Insert the data CD into the X30 and navigate to the Browser using the remote controller. ② You will see the CDROM. ③ Select and confirm with the OK button and select the music to play. 【 TIP 】 If you wish, you can import the music on the CD to the Music DB of X30. Press the MENU button on the remote control when on the music list and select Import to DB and confirm with the OK button. 12.
③ Select New PLS and confirm with the OK button. The screen below is then displayed. ④ Enter a playlist name and select OK. Confirm the selection with the OK button. The album list is then displayed in the Music DB, as shown below. 【 TIP ② 】 You can add music to a playlist by track or by album. ⑤ You may see + icon at the end of the cursor on an album. Press the PLAYLIST key to add the album to the playlist.
12-1-2. How to add songs to a Playlist whist playing music When you are enjoying music from the Music DB and you come across a track you would like to add to a playlist, you can add it to an existing playlist in the Playlist folder by following the following steps: [ Playing Screen ] ① Press the PLAYLIST key whilst in „Playing Screen‟ mode as shown above. ② Select the playlist you would like to add the song to. ③ Confirm with the OK key and the song will be stored in the selected playlist. 12-1-3.
12-1-4. How to edit a Playlist Go to the Playlist screen. Press the MENU button on the remote control. You can delete existing playlists, add music to existing playlists or clear music from an existing playlist. 12-2. My Playlist (Virtual Playlist) This is a virtual playlist function. After you have made a My Playlist, it will be removed if you stop playing or power off. This function works only in the Music DB. It will not work in the Browser.
12-3. Advanced My Playlist (Virtual Playlist) You can create a Advanced My Playlist (Virtual Playlist) when you come across a track you would like to add by its artist, genre or album. ① When you come across the track, press the AD MY PL key at the „Playing Screen, see left. ② The popup menu will appear as shown on the left. ③ Select one choice and confirm with the OK key ④ The selected song will start playing, and will be stored as My Playlist. 13.
13-2. Multiple X30’s on the same network. Place the X30 with the storage (music server) in your living room. A second X30 (without storage) is placed in room #1 or room #2. You can then play files from the X30 (music server) on the X30‟s without storage‟s, see schematic below. 13-3. The X30 works as a Music Server with Sonos. Sonos users can use the X30 as a music server with their Sonos device. 14. I-Service Ensure the X30 is connected to the network (internet) before using the i-Service.
14-1. Internet Radio 14-1-1. How to play the Internet Radio. You can enjoy many internet radio stations. The X30 internet radio is based on the Reciva server. It provides many stations by genre and by country. 【 TIP 】 If the X30 is not connected to a network (internet), you will not be able to select the i-Service icon 【 TIP 】 When the i-Service icon is highlighted the X10 is successfully connected to the network. ① Select the i-Service icon and confirm with the OK key.
14-1-2. How to add your favorite stations into My Favorites. 【 TIP 】 If you add your favorite radio stations into the My Favorite folder you can find them easily. Whilst playing a station press the FAVORITE button on the remote control to add the station to your Favorites list. The station will then appear in the My Favorite folder, as shown left. 14-1-3. How to play My Favorites. Once you have made a My Favorites list, pressing the FAVORITE key takes will take you into the My Favorites list.
14-1-5-1. How to record ① While the I-Radio is playing, press the REC button to start recording. ② Press the STOP button to stop recording [ Playing ] [ Recording ] [ Playing ] 14-1-5-2. Where is the recorded file stored ? The X30 creates a [IRadio Recording] folder on the hard disk automatically when recording has started. All recorded files are stored in the IRadio Recording folder, see below. 14-1-5-3.
14-1-5-4. How to edit the recorded file You can edit the recorded file easily with the file management function. Place the cursor on the recorded file and press the MENU button to run the following functions: [ TAG Edit ] [ Import to DB ] [ Copy File ] [ Move file ] 14-1-6. Reservation Recording This function works for the stations stored in the My Favorites folder. 14-1-6-1. How to set reservation recording ① Place the cursor on the station that you want to set for reservation recording.
14-1-6-2. How to work 1) In case that you powered X30 off after recording setting (e.g. 4:00PM / record for 3 M ) X30 will start booting up automatically at 3:57PM(3 minutes before set time 4:00PM) X30 will start playing the station at 3:59PM (1 minute before set time 4:00PM). Volume is set as „Mute‟ automatically. X30 will start recording the station at 4:00PM and keep recording by 4:03PM. X30 will power off automatically by itself as soon as it finishes recording at 4:03PM.
15. FM Radio 15-1. How to play FM Radio ※ NOTE: Make sure to install FM Radio antenna properly first. ① Select FM Radio icon to start FM Radio ② X30 will try seeking all stations available ③ Select one station and confirm it with OK key. ④ It will start playing like left ※ NOTE: On the playing screen like above, you can do fine tuning with the arrow (UP/DOWN) keys, and seek station with the arrow (LEFT/RIGHT) keys.
15-2. How to record FM Radio ① When playing FM radio, press REC key on the playing screen to start recording. ② To stop recording, press STOP button of remote control.
17-1. Play audio file data CD’s The X30 supports data CD‟s with recorded audio files. The X30 supports various audio files such as; APE/CUE, HD FLAC, HD WAV, MP3, FLAC, WAV, WMA, M4A, AAC, ALAC, AIFF, AIF, Ogg Vorbis, PCM, PLS, M3U, etc. ① Insert the data CD into the X30. ② Select the Browser icon and confirm with the OK button. You will see the data CD. Select the music you would like and play using the OK button. 17-2. File Management function 17-2-1.
To check the information of a ripping / converting result, place the cursor on the album and press the INFO key. 17-2-2. TAG Edit This function is only valid for files not for folders or disks. Place the cursor on the file you would like to edit and press the MENU key. Select Edit Tag and the edit screen is displayed, see below. 17-2-3. Import to DB You can import a folder or file from the HDD, USB or CD to the Music DB.
③ You can select „move‟ or „copy‟. ※ NOTE: If you select „move‟, the importing speed will be faster than copy. But, the original file or folder will not exist at the original place any more. Now copying to Music DB !!!! 17-2-4. Copy Files You can copy files or folders by following the procedure below: ① Place the cursor on the file or folder you would like to copy ② Press the MENU key and select Copy Files. The screen below is then displayed. From here, refer to 8-3-2.
17-2-6. Delete Files You can delete file or folder using the following procedure: ① Place the cursor on the file or folder you would like to delete ② Press the MENU key and select Delete Files. Confirm with the OK button to start deleting. 17-2-7. .PLS or .M3U files with internet radio stations If you wish to play an individual internet radio station using the X30, you will need to create a PLS or M3U file and put the file(PLS or M3U) onto the storage or USB host of the X30.
Now playing! ※ NOTE: The playing screen via digital inputs like Toslink or Coaxial will show the input sample rate of the source file like left picture. 18-2. How to record While playing music through the Input of the X30, press the REC button to start recording the music playing, see screen shot to the left. Press the STOP button to stop recording. ※ NOTE : Explanation 1) Record Sample Rate: 192Khz: This is decided according to the setting of the Recording Sample Rate at SETUP.
18-3. Where is the recorded file stored ? If you start recording, the X30 creates the folders automatically where the recorded files are stored. ① Select Browser icon on the home screen, and confirm it with OK key. ② Select HDD1 and confirm it with OK key ③ Select Browser icon on the home screen, and confirm it with OK key. ④ Select HDD1 and confirm it with OK key ⑤ There will be folders like ANALOG IN, AUX IN, FM Radio, TOSLINK ⑥ Select proper folder and confirm it with OK key to see the recorded file.
③ Select TAG Edit and confirm with the OK key, the edit screen will be displayed as follows. ② Put the Title, Artist, Album, Year or Genre. If you put same album name into each recorded file, all files which have the same album name will be sent(imported) to the same folder (album) in the Music DB when you try ripping (loading) the edited files to the Music DB. ※ The edited file name will be changed to [Album name]+Title 18-5.
⑥ You will see Test Album (Album titled at the edit step) and press the INFO button to check the converting status, as shown left. 19. Extra Function 19-1.
19-3. Photo Slide Show ① Prepare photo file in the storage of X30 or in USB. ② While playing music, press MENU key on the Playing Screen to popup menu list like below. ③ Select Slide Show and confirm it with OK key. ④ You will be guided to select photo file. ⑤ Select the 1st photo file and confirm it with OK key. Then, the slide show will start based on all photo files in the same folder. ※ NOTE: You can set „Slide Show Effect‟ and „Slide Show Time‟ at SETUP 19-4.
19-5. LYRICS LYRICS function is to display lyrics on the screen during playing in case that the song playing has lyrics file(.LRC file). ① On the playing screen, press LYRICS button of remote control. The lyrics will be displayed like below picture. ② Press LYRICS key again to go back to the playing screen. ※ NOTE 1: LYRICS function works at Browser mode only, not at Music DB. ※ NOTE 2: If lyrics is broken on the screen, you need to check OSD language setting and LRC file language 19-6.
19-7. Preset E.Q(Equalizer) When music is playing you can change the Preset equalizer setting by pressing the Preset E.Q. button The default setting is Normal. By pressing Preset E.Q button, you can change like Normal → Classical→ Club → Concert Hall → Dance → Live → Party → Pop → Reggae → Rock → Soft → Soft Rock → Techno → Bass → Bass & Treble → Treble → Vocal → Custom EQ → Normal ※ NOTE: Preset E.Q works for X30‟s Speaker Out (inside amplifier) 19-8. Custom E.
19-9. Resume Play When you boot up the X30, it will automatically resume playing the music in the Music DB, Browser or i-Radio from where it was last stopped. Select Resume Play and confirm with the OK key. Set it as ON as shown left. ※ Default is OFF 【 TIP 】 ※This function does NOT work in the case that the „Alarm‟ function or „Auto Play‟ function is enabled. ※Function priority : Alarm function ---- Auto Play function ----- Resume Play function 19-10.
① Normal : Play all the music in an album or in a folder at once in sequence. ② Shuffle : Play music in an album or in a folder at random. ③ Once : Play the current music once only. ④ Repeat One : Play the current music repeatedly ⑤ Repeat All : Play all music in an album or in a folder in sequence and repeatedly 19-12. Alarm You can set six(6) alarm settings on the X30. ① Go to Alarm at SETUP, and confirm it with OK key. The following screen will appear.
19-13. Auto Shutdown The X30 will power off automatically at the assigned date and time. ※ NOTE: Refer to section 5-7-10 Auto Shutdown for detailed explanation. 19-14. Sleep mode ① Press the SLEEP button on any screen (except setup), the popup Sleep Off/Sleep 10Min/Sleep 20Min/Sleep 30Min/Sleep 1Hour/Sleep 2Hour/Sleep 3Hour is displayed. ② The X30 will be set as per the last popup ※NOTE: Sleep icon will show up after setting.
19-16. Shortcut to find files in all list modes On each list mode if you press an alphabet key on the remote control the cursor will jump to the first file will that character at the beginning. 19-17. Seek function on the Playing Screen At the playing screen you can run a seek function by pressing numeric keys on the remote control. For example, if you press the 5 key while playing a file it will start playing from the 50% position of the file based on total playing time.
20. Specification Model name Host CPU & Memory CD Player CA-X30 Remarks Embedded 700Mhz MIPS Main Memory(4Gbit, DDR2 800Mhz) Firmware Memory(4Gbit) Type Front Loading Supported CD, CD-DA, CD-R, CD-RW, DVD-R/RW media Supported DXD 24bit/352.8Khz, APE/CUE, HD FLAC, HD audio WAV, MP3, FLAC, WAV, WMA, M4A, AAC, ALAC, codec & AIFF, AIF, Ogg Vorbis, PCM, PLS, M3U, etc.
Connectivity 3 x USB Host ports Front 1x USB Host Network Wired Rear 2x USB Host Wireless 801.11b/g/n WiFi USB dongle(Optional) (Optional) HDMI OUT(video only) x 1 Connecting to external big screen like TV for GUI display and photo slide show POWER Audio Power Supply Linear Power Supply Isolated power SUPPLY CPU Power Supply 150W internal SMPS source Supported Hard disk Storage 2.5” SATA, up to 1TB Removable storage try 3.5: SATA, up to 4TB (drawer) is provided SSD „2.
21.Troubleshooting 1. There is no power. 1-1. Make sure the power cord is connected. 1-2. Check the X30 is switched ON at the rear panel. 1-3. Make sure the plug is fully inserted into the wall socket. 2. The X30 does not respond to the remote control. 2-1. Replace remote batteries 2-2. Check for interference from other IR sources 2-3. Reduce the distance between the remote control and the X30. 3. The X30 does not display the network-shared folder on your PC 3-1.
