User manual

5-8-3. Time Set (Manual)

Without a network (internet) connection, you can set time manually.

5-9. Firmware

You can check the current firmware version of your X30 and install the updated new firmware.

5-9-1. Current firmware

5-9-2. Update by manual (Firmware update by manual)

Select OK and confirm with the OK button. The X30 will reboot automatically to update the X30.

① Obtain the new firmware first and put it onto the root directory

of USB memory stick or the HDD of the X30.

② Plug the USB memory stick into the USB host port of the X30.

③ Go to SETUP and select Firmware Update and confirm with the

OK key.

④ Select the storage device containing the new firmware.

⑤ Select xxxxxxxxxx.pkg file and confirm with the OK key

① Select Time Set (Manual) as in the above picture and

confirm it with the OK button.

② Input your time manually and select OK to confirm it with

OK button.

Select Firmware and confirm with the OK key.

You can check the current firmware

version as shown below. Select

Current Version and confirm with the

OK key.