User manual

24
5-3. Audio
Select Audio and confirm it with the OK key
5-3-1. Player View
You can set one of the following; Cover & List, Music Info or List Only.
5-3-2. Equalizer
You can set one of the following; Normal, Classic, Live, Pop, Rock, Jazz, Dance, Vocal, Soft or
Bass.(※ default : Normal)
5-3-3. DRC(Dynamic Range Compression)Mode
※ Default : ON
5-3-4. SPDIF and Speaker Out
Follow the Audio setup according to your speaker, external amplifier or DAC.
5-3-4-1. Default setting
You should keep the default settings as shown below if you decide to connect a bookshelf
speaker (passive) to the X10’s Speaker Out connector. You can connect a headphone or an
external amplifier to the Line Out of the X10.
The default setting is that SPDIF is OFF and Speaker Out is OFF(Headphone) See below: