User manual

【 TIP 】

※ The meaning of OFF(Headphone) : If a headphone is connected to the X10, or an

external amplifier is connected to the X10 through the Line Out connector, the amplifier

inside of the X10 is OFF.

※ The meaning of ON(Sub woofer) : Even though a headphone or an external amplifier is

connected to the X10 through the headphone connector or the Line Out connector, the

amplifier inside of the X10 is still ON.

※ What is the difference between PCM2ch and Passthrough ?

 PCM 2ch : You can control volume level with the X10(using the remote control)

 Passthrough : the X10 volume level is set at zero(0) DB and volume is NOT controlled

by the X10. It should be controlled by the external device.

【 Caution 】 You must not be playing a CD whilst changing the setting to(from) SPDIF.

5-3-5. Gapless Play

The X10 supports gapless playback function for MP3 file, WAV and FLAC file only.

※ default is ON

【 TIP 】

※ LAME-encoded MP3 file only supported

※ The Gapless play function works properly on ‘Repeat All’ and ‘Normal’ modes only. For

example in ‘Shuffle’ mode Gapless play is not supported

5-4. Network

※ Make sure your Ethernet cable or a USB WiFi dongle is connected.

Select Network and press the OK button.

Set as Frequency 96Khz

z Volume controllable by X10’s remote control

z Audio output : 96Khz