User manual

5-4-1. Wired Setup

5-4-1-1. DHCP(Auto IP)

5-4-1-2. Static IP

③ Select DHCP(Auto IP) and confirm with the OK button.

There is no need to enter any values.

④ Select OK and confirm with the OK button.

① Select Static IP and confirm with the OK button.

② Enter the values such as; IP Address, Subnet mask, etc.

③ Select OK and confirm with the OK button

⑤ The screen shots shown on the left will be displayed if the

network is connected successfully.

① Select Network and confirm with the OK button.

② Select Wired Setup or Wireless Setup and confirm it with OK

button.

【 TIP 】 To check network information, press Network Info.

④ The screen to the left will be shown if the network is

connected successfully.