User manual

5-6-7. Brightness

You can control the brightness level of the LCD.

Select Brightness and confirm with the OK key. You can set the brightness using the LEFT/RIGHT

arrow key on the remote control.

5-6-8. Auto Shutdown

The X10 will be powered off automatically at the assigned time and date.

① Go to SETUP and select System.

② Select Auto Shutdown and confirm

with the OK key

③ Select from the list and confirm.

④ You can set the time on the X10

⑤ Once the time is set move cursor onto the OK icon and

confirm with the OK key.

[ Note ]

Circle 1 : Use the arrow key(UP/Down) to change the values.

Use the arrow key(left/right) to move the cursor.

Circle 2 : Press the OK key to change ‘Repeat’

Circle 3 : Use the arrow key(left/right) to set ON/OFF.

⑥ The left screen will show. Press the RETURN key

to exit this setup.

[ Note ] Auto shutdown does not work properly if

you set the shutdown time ‘within 3 minutes of the

power on time.