User manual

72
18-8.Auto Play
What is the Auto Play function?
Auto Play allows the X10 to boot up and start playing automatically when the mains power is ON
18-9.Play and Recording through LINE(AUX)-In
※ You can connect your audio players(e.g. MP3P or Turntable, etc) to the X10 through
LINE(AUX)-In of the X10. The music will play through the speakers connected to the X10 and you
will be able to record the music to the hard disk of the X10.
※ The maximum continuous recording time is: Three(3) hours. Please do not record successively
for over three(3) hours.
※ The occupied space for recording with WAV format is: 1 hour(645MB)/2 hours(1,290MB)/
3 hours(1,935MB)
18-9-1.How to play music through Line (AUX)-In
※ You will need to prepare stereo cable for this function (not supplied).
① Connect your audio player to the LINE(AUX)-In of the X10 using stereo cable.
② Power on your audio player and play the music.
③ Press the AUX button on the X10 remote control whilst at the home screen of the X10(※ AUX
button will not work on the other screen of the X10)
④ The music will play, see below, and can be heard from the speakers connected to the X10.
① Navigate to the Playlist to Auto Play.
② Place the cursor on Auto Play and press the MENU
button.
③ Select Add Song and press the OK button.
④ Place cursor on the music you would like to Auto Play.
⑤ You can see plus(+) mark at the end of the cursor. Press
the OK button. The music will disappear and be added to
the Auto Play.
⑥ Go to Setup and set Auto Play ON.
【 TIP 】 Default of Auto Play in SETUP : OFF