User manual

77
20.Troubleshooting
1. There is no power.
1-1. Make sure the AC power cord is connected.
1-2. Check the X10 is switched ON at the rear panel.
1-3. Make sure the plug is fully inserted into the wall socket.
2. The X10 does not respond to the remote control.
2-1. Replace remote batteries
2-2. Check for interference from other IR sources
2-3. Reduce the distance between the remote control and the X10.
3. The X10 does not display the network-shared folder on your PC
3-1. Check the network connection status between the X10 and your PC
3-2. According to the network environment there may be a time delay in connecting to the
network.
3-3. Try rebooting the X10 and configure the network setup again.
4. No sound from the speaker during music file play back
4-1. Check if the MUTE function in ON
4-2. Check the speaker cable connection status.
4-3. Check the volume level
4-4. Check the Audio setup(Refer to How set up Audio out at www.cocktailaudio.co.uk
)
5. The X10 does not read the disc.
5-1. Check if you have inserted the disc upside down.
5-2. Check to see if the disc is scratched or dirty.
6. The disc is skipping
6-1. Check for scratches or dirty.
6-2. Make sure that the X10 is on a firm surface and not subject to vibrations.
7. There is a hum coming from the speaker.
Make sure that all cable connections are secure.