Operation Manual

40
Wi-Fi network connection
To enable the wireless network adapter, slide down the system information bar to
display the system menu, and press on the icon. If any Wi-Fi network previously
configured is within the range of the terminal, it will automatically connect, and the
icon will be displayed in the system information bar.
Set up a Wi-Fi network connection
To connect to a wireless network, this network must have been previously configured
on the terminal. You can access the configuration of Wi-Fi networks either by holding
the icon in the system menu or by pressing on the icon in the main menu
and then on the icon of the applicationd menu to access the system settings
menu. If the Wi-Fi network adapter is active, all the networks within the range of the
terminal will be displayed .
Press on the Wi-Fi network you want to connect, enter the password in the pop-up
window, and press on Connect to save the settings and connect to the network.
Within the Wi-Fi setup menu, press [ ] button to display the Wi-Fi options. In this
menu, you can make advanced settings, as well as set up a Wi-Fi direct network to
connect directly to other Wi-Fi device, or request a PIN for a VPS connection to your
router.