Instruction manual

Turning o a Geo-Fence Alarm

1. To turn o a previously set up geo-fence alarm, SMS

[PASSWORD]+I+[1-3],0,0 to the Cocoon GPS Tracker

For example, if your password is 123456 and you want to turn o geo-fence

1, you would SMS 123456I1,0,0 to the Cocoon GPS Tracker

Setting a Speed Alert

Your Cocoon GPS can be set to alert you when it exceeds a set speed.

1. To set up a speed alert, SMS [PASSWORD]+J+1+(001-255) to the Cocoon

GPS Tracker

For example if your password is 123456 and you wanted to set a speed limit

of 20km/h you would SMS 123456J1,020

2. The device will send an SMS to the authorized numbers stating

“Over-speed! + GPS-INFO” when the Cocoon GPS Tracker’s recorded

speed exceeds 20km/h

3. To turn o a speed alert, SMS: [PASSWORD] + J+0 to the Cocoon

GPS Tracker

For example, if your password is123456, you would SMS 123456J0 to

the Cocoon GPS Tracker

Setting up GPS Signal Loss Alert

This function lets the Cocoon GPS Tracker automatically send the last known GPS info

to all authorized numbers when it enters an area without a GPS signal.

1. To set up a GPS signal loss alert, SMS [PASSWORD]+K+1

For example, if your password is 123456 you would SMS 123456K1 to the

Cocoon GPS Tracker

2. The device will send “Before +GPS info” to the preset numbers, when GPS

signal is lost

3. To turn o this function, SMS [PASSWORD]+K+0

For example if your password is 123456 you would SMS 123456K0 to the

Cocoon GPS Tracker