Instruction manual

Charging the GPS Tracker

1. Open the back cover of the GPS Tracker

2. Insert the battery into the GPS Tracker

3. Connect the USB cable to the GPS Tracker

4. Connect the other end of the USB cable to your computer or included

charging adaptor

NOTE: Charge the GPS Tracker for a minimum of 4 hours before rst

use to maximise the battery life

Powering On / O the Cocoon GPS Tracker

1. Hold the Power button on the top of the unit for 5 seconds to turn the

GPS tracker on

2. The GSM & GPS lights will TURN ON to indicate the GPS Tracker is on

3. Hold the Power button on the top of the unit for 5 seconds to turn the

GPS tracker o

4. The Power button will fade to indicate the GPS is turned o