Instruction manual

9
Setting the Time Zone
The unit is set to Australian Eastern Standard Time by default.
1. To modify the time zone, SMS [PASSWORD]+L+[+00/-00] to the Cocoon
GPS Tracker
For example, if your password is 123456 and you want Eastern Standard
Time, you would SMS 123456L+10 to the Cocoon GPS Tracker
Naming the GPS Tracker
You can add a name to the Cocoon GPS Tracker to give individualised SMS reports.
This can be useful if you need to distinguish between multiple GPS trackers
1. To attach a unit name to all SMS alerts, SMS [PASSWORD]+U+1,[NAME]
For example if your password is 123456 and you want to name the unit
“John”, you would SMS 123456U1,John to the Cocoon GPS Tracker
2. If successful the device will reply “John UserName set! +GPS info”
Locating the Cocoon GPS Tracker with Latitude and Longitude
Your Cocoon GPS Tracker can send its current location using Latitude and
Longitude; this information can be then entered into mapping software to nd its
current location.
1. To request the Latitude and Longitude Coordinates of the Cocoon GPS
Tracker, SMS [PASSWORD]+F
For example, if your password is 123456 you would SMS 123456F to the
Cocoon GPS Tracker
2. The device will reply “GPS Info!
Date: xx; Time:xx; LAT:xx; LOT:xx; Speed:xx”
3. Using the LAT and LOT values you can locate the device using mapping
software such as Google Earth or Google Maps