User manual

cocos-promotions gmbh | talheimer straße 32-d | 74223 flein, germany | phone [phone] | fax [phone]-19
www.cocos-promotions.de | www.cocos-promotions.com | www.usb-sticks.de
9
• REC type
At the FM Submenu, select the REC Type-menu and press the Mode-button to enter the REC Type-menu, then push the Next-
switch to choose “Fine REC” or “Long REC”. Press the Mode-button again for confirmation. For other operations, see the
section of “Voice recording”.
Note:
If the current station is in STEREO, the icon “S” will appear in the display.
8. System Settings (SYS)
Here, the system parameters can be set and every option varies according to the firmware upgrade.
Enter the main-menu. Push the Next-switch, in order to select the icon “SYS” for System Settings. Then press the Mode-
button to enter the System Setting-submenu. Push the Next/Last-switch to go to the submenus. Then again, press the Mode-
button to enter the desired submenu.
Parameter Description
Record Time Set the time and date, when the recorded files are saved
Backlight Set the time (sec.), how long the backlight should stay on without any operation
Language Select your desired language
Power Off Set a fixed time, after which the player will be turned off automatically
Replay Mode Set the working status on Replay-Mode
Contrast Set the desired contrast level of the LCD-Display
Memory info Shows the total memory capacity and the percentage that has been used
Firmware version Shows the current firmware version
Firmware upgrade Special function for upgrading the firmware
Exit exit the current menu
Instructions
• “Record Time”
1. Go to the System Setting-menu. Push the Next/Last-switch to go to the menu-item “Record Time”.
2. Press the Mode-button to enter the Record Time-menu.
3. Press the V + to set the time in the sequence of “YY-MM-DD” (Press V - to set the time in the opposite sequence).
4. Push the Next/Last-switch to adjust the numbers.
5. Press the Mode-button for confirmation and to exit the current menu.
• “Backlight”
1. Go to the System Setting-menu. Push the Next/Last-switch to go to the menu-item “Backlight”.
2. Press the Mode-button to enter the Backlight-menu.
3. Push the Next/Last-switch to set the desired time for the backlight.
4. Press the Mode-button for confirmation and to exit the current menu.