User's Guide

1-4 Enhanced AM/FM Synthesizer Instruction Manual OS(R/T)-3(A/H) 29 - 470 MHz
Modulation Sensitivity: 3.0 kHz peak deviation (400 mVrms input)
External Reference Input: External reference input signal via SMB connector J1
Input level 0 dBm ±3 dB
Input impedance 50 Ω
Input frequency 10.0 MHz or 9.6 MHz (selectable through
digital board jumper JU1)
Power Requirements: Normal Configuration:
+9.5 Vdc @ 160 mA for FM and 65 mA for AM
Low Current Standby Mode (TCXO enabled):
+9.5 Vdc @ 14 mA for FM and 4 mA for AM