User's Guide

DANIELS
ELECTRONICS LTD
TM
3-10 CI-PM-3 Paging Modulator Instruction Manual
3. To place the TS-64 in monitor mode (i.e. over-ride the decoder and unmute the receiver audio
for channel monitoring):
a) Ensure TS-64 jumper JP11 is removed.
b) Ensure the TS-64 Hang-up Input is floating or above ground potential:
i) Remove jumpers JU52 and JU53, or
ii) Remove jumper JU52, install jumper JU53, and leave CTCSS HU/BUSY input J1
Pin 11 floating.
4. To disable paging transmission while the channel is busy:
a) Install TS-64 jumper JP11.
b) Remove jumper JU52, install jumpers JU53 and JU54.