Instruction Manual

DE
DANIELS
ELECTRONICS
2-2 Frequency Select Handle Instruction Manual
c) Both the Ø or Œ have two modes of operation.
i. Single press is for small changes. Single button presses corresponds to single channel
( 25 kHz) steps.
ii. Accelerated is for large steps. After 6 seconds of the button being pressed the
frequency will change by8 channels per step (200 kHz). After 9 seconds of the button
being pressed the frequency will change by 20 channels per step (500 kHz).
Note: The operating frequency is set to displayed value once the Ø or Œ buttons is released.
4) To Lock / Unlock the Buttons.
a) Press the ¸¸
¸¸
button. The display will show the current lock status ("Locked" or
"Unlocked")
b) To lock the buttons, press the Ø button ( the display will then show "Locked")
c) To unlock the buttons, press the Πbutton (the display will then show "Unlocked")
Note: To display the current channel and frequency, the display must be allowed to go to sleep.